Understanding air layering so you don’t make these common mistakes.
Vložit
- čas přidán 8. 11. 2021
- The most common mistakes made during airlayering and how to avoid making them. Learn from my mistakes so you don’t have to learn from your own. #permaculturelife #permaculture #airlayering #foodforest #gardening #mangotrees #gardeningtips #gardeninghacks #gardeninghintsandtips #andrethefarmer
Great tips my friend!!! You've added to my knowledge base. 🙏
Solid vid, dude...
Thank you so much for no flim flam, no 19 minute backstory on why you love mangos, no buzzword crap, etc...
just knowledge bombs and “I’m out” 🙏❤️
Keep it up 🤙🤙🤙
Btw, just knew you were gonna spit a blue flame trying to tie that off one-handed lololol...
Thanks.
You offered a Great tip. Use an Air Layer to prune unwanted branches .
I like to tape 2 zip ties to the back of the sandwich bag, instead of string, It helps secure
the A/L when you are working alone.
Zip ties/ cable ties are perfect
Absolutely the best video I've seen so far on how to do air layering.
Thanks for explaining in a simple manner the what and why of everything.
Thank you
I would agree this is one of my favorite air layering videos and explained in laymen terms for me. Thank you!
I air layered a pomegranate tree and used zip ties, instead of string because I did it alone. It worked great.
I found the biggest mistake is not being patient for the air layer to get lots of roots , cutting it free to early is a really bad idea , the roots are tender and can fall off , also plant it straight away how it is don’t mess with the roots and loosen them up etc , the roots will find there own way , just plant it carefully , it will grow. 👍
I think it's probably better to first pot it in a medium where it will be able to grow more roots quickly before being planted. And definitely keep it away from sun till it grows more roots.
How long does it usually take? Never done it before?
The other mistake you are doing is. You are applying the root hormone on the incision of the air layer. The root hormone goes on top of the top part of the incision, about one inch above that. It is very important that the cut of the top part of the air layer is right below a node because the roots will come from right there and right there is the part where the root hormone goes.
I'm wanting to air layer a 3" vertical trunk. This video is promising. I'm going to top the tree anyway so no worries if it doesn't. Any more advice would be welcomed.
@@Saintcloud-vd9ze patience…..
Thanks for the helpful information that I've seen nowhere else!
Just so new people know, the cambium layer is the green layer right under the bark. If you dont see green and you see that whitish brown inner bark then you are good.
Tree trunks have 5 separate layers to them. They are the outer bark, inner bark (phloem), the cambium cell layer, sapwood, and heartwood. Each layer has their very own purpose, but overall, the trunk’s primary job is to protect and support the tree. Look below to review each layer and what they do.
❶ Outer Bark
Like a shield, a trunk’s outer bark is there to protect the tree from its outside surroundings, including inclement weather, wildlife, pests, and more. It also controls moisture, by both preventing excess moisture in the rain and snow, and retaining sufficient moisture levels during dry seasons. It also provides insulation in cold weather and protects against sunburn in the summer.
❷ Phloem (Inner Bark) Pronounced Flow'em
The phloem, or inner layer of bark, is where food and nutrients are passed DOWN through the tree to nourish the root system. This layer has a very important job, but a very short lifespan. It eventually dies, turns to cork, and becomes part of the outer layer of bark!
❸ Cambium Cell Layer
The cambium cell layer is interesting because it is the part of the trunk that grows. Each year, this layer produces more bark and wood as a reaction to the hormones being passed DOWN from the leaves along the food pipeline. These hormones are called auxins, and they are very important because they stimulate new cell growth!
❹ Sapwood
Sapwood is new wood, and serves an important role as the tree’s water pipeline, delivering water UP to the entire tree. And as new sapwood is created, the inner cells lose their vigor and turn to heartwood.
❺ Heartwood
Heartwood is the most inner part of the trunk. It plays an important role in balance, stability, and security for a tree. Technically, heartwood is dead, but it does not atrophy or decay (unless the outer layers are jeopardized). It is made up of a hollow, needle-like cellulose fibers that are joined together by a glue-like chemical called lignin.
@@moonlightcrusier8008
Thank you. Didn't know all that.
5:17 It's safer to pour some of the rooting hormone into a clean, recyclable container (such as a jar lid) and use that portion. That way you won't accidentally contaminate the rest of the hormone.
Such a great video! Good tips and explanations. Thanks for sharing.
Hello Andre,
I loved your saran wrap solution. I do lots of air-layers near Durban, South Africa. One trick I use for single handed work it to take my wrapping twine which I cut to about 7 feet long, and tie a loop right in the center. I then place one end around the stem which I am cutting and through the loop so its ready to go when I get the bag into position. Then I am holding the bag tight with one hand, take my other hand and position twine over bag and just pull the end which I already passed through the loop really hard, until some fluid runs from the bag. Then I just keep wrapping both ends and tie off. Regarding ants, I see them a a sign of success. I do the foil wrap and when I open and see ants I expect nice roots 90 percent or better. My guess is that the conditions are good for both roots and ants at the right moisture level. Our climate has a dry winter and wet summer, not exactly like Florida but our summers are similar to yours.
Wishing you well and thanks for this excellent video.
Blessings,
Rick
Thank you
Small fire ants here in Florida can make a huge nest in days which will dry peat moss out and prevent rooting
this is the best explanation I have encountered. Thank you so much for this information 🙏 ☺️
Hey Andre awesome really great Video Thanks for posting 🙏🕊
Very helpful, good video.
Best explanation I've seen, and I've looked at plenty. Thanks for taking the trouble.
Thanks for watching!
Pretty good job.
I'll try for sure
Thank you, very informative
Very informative
Im going to try your method. The plastic clamshell's I used had zero success on all eight applications. Thanks for showing your skills.
Thank you so much 🙏🏼🙏🏼🙏🏼🙏🏼💚🙋🏻♀️
Great video sir well explained thank you very much 👍 👍 🙏
the video i’ve been needing!
NICELY DONE 👍🏾✅...I DID BASICALLY THE SAME THING TO MY FRUIT TREE 🌳 THANKS FOR SHARING!!!🤓👍🏾🙋🏽♀️🔥🙏🏾👑✝️📖🔥
Great explanation!
Glad it was helpful!
If you use sphagnum instead of peat you can mold it around then apply plastic/moisture barrier
I use clone-X Rooting hormone gel .
Thankyou!!
Well explained my good man 👍
Thanks
Nice
Yay I’m here from tik tok!!! Ready for some katuk seeds!!
ME TOO
I like the idea of using the ziplock bag rather than "creating a funnel" . The only thing I thought of that may make the one man show easier is to use solid wire instead of string. When I do this( or try to) it's for bonsai, so I always have aluminum wire laying around which is soft and easy to bend. But ,now I'm thinking, if you had a good thick freezer bag you could also use a coat hanger etc. and not split your bag open wrapping. Appreciate all the helpful hints you shared.
You are so smart and a great instructor! Thank you for this video! I have a rare tree I'd like to air layer. I also wonder will this work on a desert rose?
It should work. As long as it’s a woody plant
Zip ties are your friend! Great content and tips. 👍
If you wrap 'batting fabric' below the airlayer - about 6 inches long; put an elastic band around the middle and fold it over, you'll find it very effective against ants. If you can keep ants out your trees, you keep out most of the problems...
Thanks
Thanks, nice vid
Thanks
great video. it would be great if you included the rest of the procedure. After three months, I assume you check it to make sure roots have grown, then you cut it and put it in the ground or a container.
I have posted those videos as well
@@andrebaptiste, respectfully, it would be good to have all the information on air layering in one air layering video. I'll say this as well. The location for your two cuts is important. It is best to place the top cut just below a node. Maybe 1/4 or 1/2 an inch. The lower cut should be at least equal to the diameter of the branch. Maybe a little wider. So if the diameter of the branch is 2 inches, the width of the bark and vascular tissue removed should be at least 2 inches. I would love to see what the roots look like and the process for potting or planting. I'm a little sensitive to time, so I wouldn't watch two or three videos if all the information could easily be included in one.
@@dewanehill1435 Well then you better get busy Dewane. And while your at it if you'll create one singular video for this 3 month process that shows the anatomy of a tree and how you managed to master the art of the cut yet never seen a sack of roots, or even know what to do with it, I for one would watch it.
@@ckennedy309, I'm thinking about a gardening channel. maybe I will. I've done it successfully many times.
I would love to see the next step.
I have lots of videos showing that
Good video with great tips. I’m wanting to air layer an old pear tree. The branches I selected are larger about 2 1/2 to 3” diameter then prune the top branches after the cut and replanting. Planning on using more peat also. My idea is that this larger branch will begin to produce faster than a smaller air layered branch. Any opinions and suggestions would be greatly appreciated. I’m in south central Louisiana.
Yes larger branches will fruit faster. But are more difficult to airlayer successfully
Good video tho thanks
Some things I noticed that might help.
After you've finished the plastic wrap put some aluminum foil over it,
It keeps it dark in there and helps the tree realize that it's dirt and it needs new roots.
Second your braches might just be to large. The larger it is the more energy it needs, and since it's been cut it doesn't have quite the supply it use too.
Those three branches just above on that same branch would be adequate size.
If you start to see the leaves dying it could be because the branch is just to big and not getting the moisture it needs. Try removing some of the leaves, cause they take a lot of energy.
But if this is working still than have at it! I'm new to this too, but just some things I've noticed.
Great job and good luck!
Thanks
I use foil, too, to keep the area from overheating.
@@sparkyheberling6115 I also read that the foil helps to prevent the growth of harmful microorganisms in the soil
I'm surprised that you didn't discuss the pre-fabricated air layering pods.
They're awesome in the sense that they're black, so no light will pass through. They're reusable & easy to secure with only one set of hands.
Yep I use them most of the time. Especially in new videos
It might make it easier getting the string on to use a really long piece and wrap it around a couple times so it stays still while u tie it. That’s easier to me maybe it will be to u as well. Maybe not but I think it works well.
👍
Great video. I like that you picked a large branch. I am in California and have a Meyer lemon tree. I am wondering if having fruit already growing on the branches is a problem or concern? Should I select only branches without fruit or cut off the growing fruit? Thanks so much.
You can do branches with fruit. I just wait till after harvest to remove them.
Thank u for the clear explanation. Is there a follow up video to your mango tree? Did it root? How is doing now?
I have done dozens so hard to remember which tree that now is. But there are lots of reveal or after videos on my channel as well
Spray bifen around your tree at least two feet from the truck it kills ants if you dont like pestides you could puy vasaline around the base of the truck
I wonder if there might be an issue with growing roots in a clear bag where the sunlight can impact the growing roots. But IDK, just factoring roots dont like sunlight.
I agree
thanks for your video. what is the best time to air layer? does it depend on the species, age of tree or climate zone? please advise. thanks
I’d say anytime the tree is not dormant
Electrical tape instead of string makes it easier to do with one hand.
Hey do you do a 75% peat moss to 25% potting soil mix for your air layering?
Pretty much all peat moss. Occasionally I add soil when I’m short
It was good to see some one address mistakes of air layering. Best time of the year is?
Any time in a warm climate.
Great video Andre. Question for you: Is there a Size Limit on an Air Layer? i.e. what is the maximum branch i can air layer and transplant safely? 3 feet? 4 feet? Any rule of thumb? Why do i ask? I have a large main branch on a loquat tree that is too tall for me to pick the fruit. The branch is about 6 feet taller than i can reach so i want to air layer that piece instead of just trimming it off. I'm worried it may be too big but wanted to get your opinion first.
Yes. It get more difficult eith bigger branches. Thickness of my wrist is the biggest I’ve ever done. It becomes hard to stabilize in a pot when they are heavy.
@@andrebaptiste What about height? What is the tallest you would do? 4 feet?
Some of my airlayers haven’t produced roots, only a bulbous growth where the roots should be growing, any idea what I’m doing wrong? Thanks!
Perhaps some cambium is left intact ?
Which type of rooting powder do you use? That looks like Hormex, but I found they have different versions.
I am not picky. Any on Amazon. Sometimes cinnamon powder or aloe instead
How do you know where to cut? I thought you had to do it at a leaf node? Also, can you do it on a green branch or does it have to be woody?
You can cut anywhere. I prefer woody. But it can work with green. Just more chance of failure
Forget the string dude........use the plastic wrap to tie your soil bag to the tree then wrap it air tight.
Many ways to do it. I have several techniques.
Can you show us some trees that have been air layered that are 5-10 years old. I can’t find any old growth apple orchards that have been air layered.
I’ve only been gardening for about 7 years. So I don’t have airlayers that old. But orchards would start with grafted trees
You could use zip ties to help make it easier as a one person venture.
Yes. I’ve done that before
Good explanation , maybe that's why my air layers have failed. Thanks.
Will the moisture stay within the Ziploc bag for the entire three months?
Yes
Are you doing that in between nodes or with the node in the middle
Doesn’t make a difference
@@andrebaptiste ok awesome thanks
How can I get some of your Katuk seeds?
Subscribe and send 1$ on cash app to $andrethefarmer
Thanks Andre. I'm reckoning your technique applies to pecans too, huh?
You bet!
Did this air layer take. That was a thick branch. Also is a air layer mango tree as hardy as a grafted tree?
Yes. And probably not. Since they don’t have a known hardy root stock.
Can we revisit this tree
Probably did. I’d have to look at the video again to see which one it was. But I have a lot of videos of opening airlayers on here, TikTok and IG.
No additions or corrections. I'm just feeding the algorithm monster before I tap the thumbs 👍 button.
Thank you 🙏🏾
At what temperature you are working?
Im in florida. Zone 9b
You should not use finger directly touch root tone which is harmful chemical, and should pour out the powder for only applying amount, otherwise, the root tone would be spoiled by repeated touching.
Great job but we need to see how much roots that create, most people show the entire process.
Thanks. I have lots of videos with results.
How long does it take to root
2-3 mos
The ants were not your friends 😂😂, they make holes in the air layer, which in turn leads to loss of moisture. Therefore the probability of your air layer becoming successful reduces drastically
That yellow tag wrapped around that poor branch is driving me crazy all video
I've read that the stem cutting should only be pencil thin.
No you can do any size branch. Minimum of a pencil thin maybe
Does the season matter much when we air layer?
Not really unless you are in a cold climate. Then wait until trees break dormancy
@@andrebaptiste Thank you fo your insight😊👍
@@andrebaptiste Oh now i have another question probaby obvious to most, but how can I identify when it's dormant vs not dormant? I think one clue is it's winter then it means dormancy right?
Does it have to be getting watered ? The ball of soil.
No. Seal the water in
@@andrebaptiste ok thank you.
Use zip ties it helps alot
Did it root?
Yes
@@andrebaptiste how long did it take?
@@andrebaptiste all you used was peatmoss? No other soil? What about branch wise? I heard to not do it on old branches and not do it on younger branches, so how do I know which one to pick?
Is there a reveal video?
Yes. Check out my shorts
Did it work?
Yes
@@andrebaptiste Pictures or follow up video?
And follow up?🙏
Many after videos posted on here and TikTok and instagram
Hi
Hi
Out of interest why did you start higher up on the branch and not lower down? I'm wondering if there is a reason. That's all. Thanks very much :)
I just start where I want to tree trunk to start. And I like to have a bit under the root so when I plant it it will be more stable
@@andrebaptiste Thanks Andre I have 2 young (ish) shoots from a Cherry tree and was wondering, I'm happy with staking it, i'd rather have a longer trunk. much appreciated.
Bro use lakshman rekha ants wont come and no nest problem😊
air jorndans? naw Air Layers
Please use gloves when handling the hormone:)
It’s harmless