How to Fix Philips TV Wont Turn On Red Light On || Philips TV Not Working
Vložit
- čas přidán 19. 01. 2020
- What to do if Philips TV is not turning on, it is dead as there no power?
1. Check that the TV's AC power cord is plugged into the power outlet.
2. Unplug the TV, wait for 60 seconds. Then re-insert plug into the mains socket and turn on the TV again.
There are several reasons why Philips TV won't Turn On Red Light On, and understanding each possible cause can help you resolve the problem quickly.
#PhilipsTvWontTurnOnRedLightFlashing
-----------------------------------------------------------------------------------------------
Fair Use Disclaimer:
This channel may use some copyrighted materials without the specific authorization of the owner but the contents used here falls under the “Fair Use”
Copyright Disclaimer under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use. - Věda a technologie
Hi, I have philip tv 60PFL, I check standby voltage is healthy but the 12 V Vsend after sometime drop to zero and back to 12V
I got a problem where the remote works the red light flashes when i use the remote but nothing happens to the tv
Hi friend, please unplug the power cable of tv and wait 3 minutes.
Now plug in the power cable and recheck the issues .
If same problem then need to replace or repair the psu board.
Any further information please feel free to ask me.
Thanks for subscribing to the channel and share this useful video with your friends and social media so others can solve the problem easily.
Hey , my tv Turns on No screen and No sound ( cant see menu our anything ) what can i do ?
I have a Philips smart tv 55PFL8008S/12 Power led flashes 2 times to in to seconds. Mainboard?
Hi Sir, my Philips seen almost the same problem. What I found out is the DC 5.3V is oscillation where is between 5.0v and 5.3v. Is it the problem is capacitor as well? Thank you
Physical check, didn't see any bad capacitor.
Check the frequency of the oscillation, if its if its faster. It sounds like a cap
hi, i have a philips 32HFL5011T/12 . the tv wont turn on with remote .. iv tried like 5 remotes. it turns on by the power button on side but thats it . the screen comes on and the tv menu comes on and stays . i have put on a new censor thinking its the censor but still nothing. could this be the board?
Philips 49PUH4900/88 after firmware upgrade wont turn on, standby led blinks every 60 seconds, no image, no audio, just led standby blink every 60 seconds...any clue?
Hey!
I got a Philips 46pfl7007t/12 that i bought in 2013. Last year I made a softwareupdate on it by following the steps on Philips website. After that my tv is dead and my standbylight is blinking red twice in a repeating pattern when the powercord is plugged in. Nothing have worked for me so far, forced updates etc. Any suggestions what can be wrong??
Hi Linky, i have the same problem did you manage to find a solution for this problem? Can you please share what did you do?
pavel sidenko no.. and Philips customer service su*ks
Sir , i removed the power cable for 30 seconds as i was instructed by google n still it didnt work😕😕
I have an orange light what do I dib
Im only 9 i dont know anything u said pls im so sad that my TV wont work man
We have phillips 75” 4k tv and it turns on but wont allow controller to work or buttons on back only allows for selection of hdmi settings. Nothing else. What could be the issue?
My Phillips tv is flashing red and green light and won't power up. I've cked and done everything. Does that mean it is done or what. I've had it over 10 years
Hi I have a Philip tv that will not turn on it shows that all the plugs are in but want turn on it won’t show the red light
Hello Sir, I have Philips TV that's not turning on. please what can be the problem. Pls I need help 🙏
hi i change the philips tv from lamp to led but tv doesn't go green only red . i think i need to disable open lamp protection but i cant find how to. The board DPS-168BP chip DDA001A
Hy xhan oyunda, Please unplug tv power cable for 30 minutes and then recheck the problem. If not work then apply reset to factory settings.
Any difficulties please let us inform and subscribe the channel. Please share this helpful video with your friends and social media for happy entertainment everyday
hello sir my philips tv has a problem. after i plug, the logo on the screen showing it and thats it . can you help me please
i have a phillips 55" smart tv, the red light is there but when we sitch it on the phillips logo only appears for a second and disappears, followed by a black screen and unreponsive tv, any clue how to fix it?
Hi Sir, our friend' philips smart tv when on tv , blinks philips logo and tv is off, the power button lights red
Pro tip : you can watch series at Flixzone. Been using them for watching a lot of movies recently.
@Uriah Camdyn Definitely, have been watching on flixzone} for since november myself =)
@Uriah Camdyn yea, have been watching on flixzone} for years myself :D
what the causes of tv still on standby mode
Hai..my philips led only blue light on..no picture..can i know what is the problem?
i have philip 32pfl4008/90 standby problem
Helo sir
I have a philips television .Its screen continuously blinking and on shows left top side AV1 and right top aide shows stereo.How I fix this problem from remote plz suggest me.
Please disconnect all power cables & hdmi cable from tv and restart other devices along with tv for 10 minutes.
If possible hold power button for 10 seconds for discharge all current from tv.
After 10 minutes later plug in all power cables and hdmi cable. Then retry the issues.
Any difficulties please let us inform. Thanks for your subscribing and sharing this helpful video with your friends and social media for helping others
@@FIXNETFLIX I have follow ur steps ,but problem remain same
May be hardware issues. Check all internal and external cables of tv.
Socially lvds cable of t con board.
Thanks sharing this helpful channel and video with your friends and social media.
i have philip tv 32 inches stand red problem
Hey, I have a philips tv from 2001, it has like a rectangular button and like two leds on its right. I just bought it from some one yesterday and at its first try, it turned on really easy and normal, the next day a try it again and it didn't went that easy, until a pressed the button for like 7 seconds and it turned on (forgot to mention that while a keep it pressed, the red light started to blink). Then, I tried it like 2 hours later and It didn't wanted to turn on, even when a kept pressed the button, just that red blinking light. What could it be??
Ion know but i have the same problem
I have a phillips 32HFL5860D/27 there's no standby light.
Hi Sir, I have a Philips 55inch smart tv 55PUT6102S/98. Due to heavy rain and lightning, when I on my tv it appears green, blue, white, black and red color running on the screen. Can you advise?
Suresh Nadarajah i think you need to buy a new one. Water damage isn’t easy to fix
Do you fix TV as a profession sir? Please get back to me
TV is turning off and on continuously while we connect any input . what is the problem ?
I have a Philip Monitor but it show red light when the switch is on. How to solve the problem?
Backlight chech
Hello, my TV is Philips 46 " model 2013. It does not turn on. When powered at the beginning there is no red light. After awhile the red LED starts blinking 2 times. I checked the voltages on the PSB as recommended. This model Stand by voltage is 3,3 V. So, when the red light is off (at the beginning) all of the voltages are there. Stand by is 3,48V. The required 12V are12,3 V. The only discrepancy is the back light voltage. Instead of 44,8V it is 33,8V. When the red light starts blinking the only voltage I have is the Stand by one 3,48V. The rest are gone. No difference in the behaviour with or without the load of the main board and back light diods. No blown capacitors or other visible damage. Please, share your comments. Could it be the stabilizers of the back light? What the 2 blinks mean? Is this a sign of self testing failure? Thank you in advance!
Hi Vasil, did you find something about the problem? Mine is the same as you described and i checked all the voltage and it seems ok but the tv does not turn on? Can you share how you fix it
Maybe software problem ,change mainboard
Philips 65 inch TV red light is 2 times blinking only can’t on it. Please help me.
Hi jayanga nushan, this is happening due to incorrect voltage supply of psu board.
Please check and replace the faulty capacitor on the board.
Any difficulties please let me know and subscribe to the channel.
Thanks for subscribe to the channel and share this helpful video with your friends and social media so others can solve the problem by this easy method.
@@FIXNETFLIX capacitor is look like good. But i didn’t use TV 3 months. Now I’m trying to but 2 times blinking only can’t on it. Thank you for your kindly reply.
If you have not used the tv for long period then unplug the power cable. Others wise power supply board would be damaged .
Thanks
i have a 250 v power output wth
Flashing red and blue light, can't turn on by remote or TV
Hi, my tv will turn on I can hear sound but no picture?
Backlight problem
I want to call u
My Phillips TV turns on manually but there’s no red LED light at all
When turn off via remote then is the red light on?
Please check and reply me.
No it isn’t on. I manually turn tv on cause my remote will not connect and I’ve tried every step I could
Sound no pictures with our red standby light
My philips happen this
Making a craking sound on Stand by
So i unplug power cord
Left cold
Wrong moove
Soon i plug power cord
Home power goes down and tv make a blast noise and i knew i will not have T.v anymore )))
Now red stand by led blinking and power button makes nothing
J
Plzz reply me
Op