Spyra 2 and Spyra LX Faulty Problems | FIX
Vložit
- čas přidán 21. 08. 2022
- Spyra 2 and Spyra LX Faulty Problems | FIX
I cant believe my Spyra waterguns blew up! So i contacted spyra by email to see what they would do about it. Follow the journey here!
August 16th 2022 @- 10am - I First email to let them know the waterguns were faulty
August 17th 2022 @ 3.37pm - i got a reply asking me to send a video of the faulty guns so they could better understand the problem.
August 22nd 2022 @3.26pm - I sent them this video for them to review and the reply with how they would like to proceed.
August 25th 2022 @ 8:33am - I got an email confirming that the water guns were being replaced.
August the 30th @ 4pm - I received both replacement water guns. Follow up video to come. - Jak na to + styl
Why is your video titled “Fix” when you didn’t provide a fix?
lol. Really?!? Basically this guy made this video to “saying with out saying” he wants this problem to be fixed by the manufacturer…. Or else. And obviously they didn’t fix the issue so he released the video to the public.
Well done for making this honest review. These water guns are expensive, and most CZcams videos reviewing them, are not critical enough to base a good judgement on. 👍
For as how expensive these water guns are you would expect little to none faulty issues like this. Seems like this is common
Yeah. Hype men just hype to ellevate their own reputation with businesses and advertisers. Those kinds of reviews are worthless to us everyday consumer.
That said, i got and email from spyra today sending me a free spyra three to review. Looks like mine with again be the first fully critical one. Not holds barred for me
Got the LX first week of June 2024. Used it a few times. Today the trigger broke. I had to manually pull or slide the trigger fully outward to get that click trigger sound. It fully emptied the chamber in one shot then the trigger stopped functioning. It no longer has that trigger pressure. Followed the troubleshooting to pull the trigger multiple times. Now the chamber is filled with water. I could not empty it no matter what. Sent an email for return/replacement.
I also had a problem with my spyra lx. I have been using it for a short time and then put it a site for a while and when we were going on vacation I brought it with me. And right at the time to have some fun I started pumping up the water and it took forever after pumping for a long time i finally got the gun on pressure and when I took it out of the water a lot of water came out the front of the gun just like yours. the next time I had to inflate the gun again I saw that with every pump movement a lot of water came out of that hole at the bottom so then I thought hey this is not good. now I'm always like I'll see if I can solve it myself if not I can always send it to spyra 😜But I found out that there was a break in one of the check valves of the water gun now I must also say that I do not find that strange because you put a lot of pressure on the inside of the Water gun so why is that piece of plastic so thin there is enough room to make this much stronger so I thought this was really weird. Now I glued and reinforced the housing myself with the help of a 22mm copper pipe, I sawed it open and gently beat it over the plastic so that it now Many times stronger than before and the water gun works like new again. I think spyra can pay more attention to this part because you are putting pressure on the gun and so there is a lot of tension on this part. And I think for the money they ask for the gun that this could certainly be made a lot stronger.
Well ive just received my replacement guns. So the next step is to open them both up and see what went wrong and if i can fix them.
But the good news is, people who arent able to fix can get replacements if they email spyra.
@@ElliottRecommends ok good luck and I'm curious if it's the same problem with yours
Can you make a video of what you’ve done, it will help a lot of us.
Even just video and run through what you’ve done.
Cheers
I had same issue. took mine apart. a clip came off that holds the bellows to the nozzle. it might not have been tight enough. fixing it tomorrow.
Thanks for the upload same thing happened to me faulty now I will follow your lead and email them. Gutted it was broke on the same day we brought it
Thanks for the video. So what is the fix?
So your tip is to email support. Nice
I got my tuesday 4/24/23 and it worked perfectly till today 4/29/30 and same thing is happend, stuck at 32% and won’t shoot and when I release wanted only a tiny bit comes out.
Her too, stuck at 32%.
Did you try resetting the spyra 2?
I’m stuck on 33 also. I’ll take it apart if I have to but I’m looking for a resolution
donde lo compro
Was the replacement LX also leaking air and water? How was it? Was it also defective?
Yes its replacement arrived defective.
Yes, Stuck on 32 here also!
Press and hold the power botton for 5 seconds
I have the same problem😢
Did you have to have a recipe or record with them i bought them from a third party
I bought them directly from their website.
I have also spyra 2 with the same issue.
For this value it shouldn't happen.
My spyra 2 is not refilling it’s getting stuck at 23-24-43-44-45.
Seems to be a common problem
Thanks, I used my Spyra 2 for the first time yesterday and an hr into using (or less) exactly the same loading problem occurs. It is stuck on 23% and wont fire at all. You mentioned there is a fix for this? Is there a link to the fix video anywhere? Thanks for posting.
Seems its a highly common problem
Mine gets stuck at 23. Whats the problem? How to fix this problem?
Make a video showing the problem. Spyra asked me for this when i contacted them. So you could include it when making contact. They will probably send a replacement
I had the same, press and hold the power botton for 5 seconds
Hi , do you have the email address at spyra? My spyra 2 has the same issue sticking at 32
Both of mine stick there as well, and I already had 2 replaced with the same issue.
Had my spyra 2 for 2 weeks...used 4 times. Issues out of the box with leaking out the drain hole and also mystery yellow liquid (rusty solenoid?). Then on a charge it went bang and it seems the bladder exploded inside...what a waste of cash 300AUD!!!! I was in discussion with spyra on the email about it and then they blocked me sending any more responses 🤣 Avoid this company!
Just had the same issue Tom. Hoping that I will get a more positive response from them. Literally had only had four tanks of water through it then bang. I bought two so am worried that the other one is going to do the same thing next time I use it.
I have the same problem, and they do not want to sell the part separately, and I bought them on vacation and now they are in another country, so I had to open them up and lose the warranty. But the loss of warranty is not a problem - sell the part, but spyra is not going to do it. This is what carbon footprint then, throwing out now so much stuffing because of one burst pear?
Lucky I payed through Paypal and they issued me a refund. Spyra were no help :(
Me too. First the rusty colored water. Then all the water ran out thru the weep hole in the bottom of front grip.
I got a defective Spyra 2 from a Co-worker for 50.00 bucks. I took a chance on it seeing that he only bought it a few weeks prior and I figured that it would be an easy fix (told me that he was upset with the Company). Turns out that my co-worker was getting the run around from Spyra and then they stopped communicating with him altogether. He told me that the rubber bladder inside the water gun was ruptured (after I bought it) and that he had asked someone at Spyra to send him a replacement bladder (free if possible or pay if necessary, he just wanted to fix it himself) The company stopped responding to his messages after he requested the replacement bladder. I'm now stuck with a perfectly new looking Spyra 2 that does not work (yes we're still friends). Does anyone know where I can get a new water bladder for the Spyra 2 or a substitute that will work for it?
Good question. I dont know the answer to that. But personally, id open it up and try to repair the existing one.
Ive done it with the supersoaker with plumbers putty. But that was a different gun. Different fix
On both guns you’re not sticking the nozzle in up to the fill line. It doesn’t draw up water from the barrel, it draws up from the middle gills.
Im strictly following the instructions as there are laid out to the letter.
I bought two spyra 2's and one of them isn't unloading /loading :(
It tries to shoot but it's empty.
I'll try emailing them also..
Ive just got 2 replacement guns. so they are responding well.
How did you return yours? 25 March 2023
@@ElliottRecommends are the replacements still working for you? These things should have a lifetime warranty.
@@AxlAX i havent used them yet as i didnt recieve them until after the summer last year. But we'll be getting them out this year
Mine WONT FILL UP-- please help
You should email spyra directly. But i did also find, if you comment on their instagram. They tend to respond quicker