How To Sound Like Mike Kerr - Royal Blood | One Amp Only | Quickest Tutorial | Cheap Set Up | HD
Vložit
- čas přidán 7. 02. 2022
- Sound Like Mike Kerr - Royal Blood | One Amp Only | Quickest Tutorial | Cheap Set Up | HD
This is the simplest set up possible as far as I`m concerned. Most of the gear I am using here has cheaper equivalents, so if you follow the instructions you should be able to put this together on a budget, with a bit of research.
I spent:
Aguilar Tone Hammer - £219 - You can find a 2 channel DI/Splitter box for around £25 instead
POG 2 - £180 - You can find a very good octave pedal for around £100 instead
Behringer AB200 - £25 - this is pretty much the cheapest and best option
Aura Crunch Master (Drive/Distortion) - £100 - You Can Find a good overdrive/distortion pedal for £20 - £30
2 Jacks to 1 Jack Adaptor - £1.99
Check out my Fender Precision Bass USA 1976 Sample Packs Here: vintagebasssamples.bandcamp.com/
My Social media :
georgegeorgebass
/ georgegeorgebass
georgegeorgebass
Thanks for taking the time to do this! I’m researching some options to get the Royal Blood sound without going into ludicrous debt in the process, and this setup sounds solid.
Nice, thanks!
Thank you
Many thx for this video!
use a boss ls-2 foot switch works great, i used to run one but now 2 amps and a aby switch
Also theoretically, if I had the same setup but with a guitar, and the octave pedal going down rather than up, would this work too? (So I’d have a channel for the bass part then I’d have a channel for the guitar part with fuzz)
Which ab200 did you get that comes with a di input? I’ve been looking hard on the internet but can’t find any with the di input , just the normal cable inputs
What alternative would you recommend to the Aguilar? I’ve been looking around for a cheap alternative but I can’t find one under £100
What kind of amp will you use with that kind of setting?