Turbo Yamaha R6 - Building the fastest 600cc in the Country 👀
Vložit
- čas přidán 26. 08. 2024
- In today’s video, I will be focusing on measurements, and getting the foundation setup to start doing mock up and piping.
PayPal for anyone who want to support - contact@outspokentiger
Instagram - Facebook @outspokentiger - Feel free to contact me about collaborating or any questions you might have, stay safe out there.
Can't wait for the sound of this bike with turbo.
Yeah curious to hear how the bike sound at 16k rpms with a turbo haha
@@Outspokentiger i'll wait you until you completely building this bike bro,best regards from indonesia😁
Haha check my TurboR6 out😉
@@Outspokentiger the rpm’s are gonna spin around 0-16k three times lol
Cutlrrently looking in to turbojng my gsxr 600 to make it the fastest in nz but don't even know where to start haha. This has been helpful
Gunna be so Badass! I just wanted to say you don't have to mount the Turbo in front of the engine. Maybe you could do a side rear Mount like the Turbos for the FZ09s
Yeah you could, I just think that would require a lot of extra work. I like the idea of being able to easily access the turbos/piping/etc you know. But we will see what happens once I start getting all the piping and things here.
Eagerly waiting this project to finish
Yeah me too, hopefully within the next couple months it’s complete.
That's gonna be sicc bro! I wanna turbo my 750.
Yeah I can’t wait, should have the turbo soon.
Hey I have a newer r6 can you turbo it
Turbo 600 wow got a irrational want to have that in my life ♥️
Lol, imagine hearing that engine rev at 16k while under boost 😎
they also make a 636 kit for the r6 but cost alot to bore and re coat the engine block but it makes alot more power its either JE or JT pistons that makes the kit there is a video on youtube just about the engine and kit
Bro turbo price
Sounds sick man, can't wait for an update.
I'm so tempted right now to build a old school gsxr 750 with a built turbo 1100 engine
Why no intercooler?
I’m be running E85, but an Inter cooler is definitely not off the table if I can find somewhere to put it.
Cant wait to get me a turbo bike🤙🤙
For the intake why not just bring it in over the side of the frame, modify the gas tank so it fits
Realistically yeah you could do that, but I did some more measurements which will be in my next video, and it’s just enough space to make it work as I explained in this video. I’m excited just keep the bike is OEM as possible.
The stock manifold is a thin wall tubing definitely will get too hot 4 high output RPM 600 may have a meltdown Master Turbo
Valid point there, I’ll look into a thicker metal.
Awesome 🔥
Omg r1 😮
Thanks for watching
How much power are you going after?
200-210whp is the goal, the bike will be on E85 so that should be easy.
Where's the zx14 project? I think people would like to see
The ZX14R project is most likely going to get parted out, because one of my friends needed a motor and I sold him mine.
What kind of turbo do you have for this??
Lol we should meet up after your done and see who's faster😉👌🏼
I’m 100% down with that proposal sir 😎
You located in Spokane?
"basically wanna see how far it goes in" 🤣🤣 words from every man during sex
Mfn notification squad!
Notification squad 💪🏾
I have an 04 R6 would I be able to put one on there
Is that a terminator I see
Zaebic
Cut em and rotate em and they'll fit
Soo, what's the compression ratio and boost psi?
How much to tune a 2000 r6
It ain’t even gone spool.
I’m gap that ZX10R 👀
@@Outspokentiger i got a turbo busa now
Can you turbo my newer r6
Can it reach 300hp?
Hmmm, I believe with heads/cams, the right fuel, and enough boost I don’t see why not.
Are u trying to die jesus that is dope
WHere are your race videos R1M dad
Can the engine handle the extra stress the turbo will put on it?
Only one way to find out.
How long for completion
I plan on having this done before it start warming back up for the summer.
hey man can i drop that turbo in to the 99 carb R6 rather than the injection type?
Let’s gooo
Oh yeah 🔥
OMG............
Japan be like 👁👄👁
200-210hp ахуууууееееннноооо
#1 viewer
Notification squad 💪🏾
Why would you ever turbo a 600
Free country 👻👻
Why not?
@@battyman42069 he prolly owns a 1000 and doesn't wanna get gapped by a sleeper 600. hahaha I talk from experience d:
@@steezaholic Haha probably lol. And also thats nice stuff man! I don't live in the states and my license isn't enough for the big bikes so I'm riding a Yamaha WR450F supermoto lol
@@battyman42069 I respect all riders no matter what you ride. just have some fun and stay safe! greetings from Milwaukee, WI
Clickbait....
Fantastic 😍💋 💝💖♥️❤️