Mugen Seiki MSB1 | Under the Hood & Build Review
Vložit
- čas přidán 19. 07. 2024
- Thank you for watching! Please Like & Subscribe.
Mugen Seiki Products Used:
B0716 Al. Flange Nut 4mm (5pcs.)
B2001/1 MSB1 Kit w/ Ball Diff & Gear Diff
B2136/6 Titanium Ball Studs 6mm (2pcs.)
B2136/8 Titanium Ball Studs 8mm (2pcs.)
B2136/10 Titanium Ball Studs 10mm (2pcs.)
B2137 Titanium Turnbuckles 3.5x43mm (2pcs.)
B2138 Titanium Turnbuckles 3.5x49mm (2pcs.)
B2327 Titanium Front Axles
B2330 Ball Diff Kit
B2706/25 Aluminum Servo Horn 25T
B2708 Aluminum Steering Bellcranks
B2709 Aluminum Steering Rack
B2711 ESC Mount Plate CFRP
B2713 Battery Weight 37g
B2715 Aluminum Wing Buttons
E2601/1A 5x10x4 NMB Bearings (10pcs)
B2901W 2WD Rear Wheels 2.2in, 12mm Hex, 2pcs (White): MSB1
B2902W 2WD Front Wheels, 2.2in 12mm Hex, 2pcs. (White): MSB1
Flashpoint RC Products Used:
FP0300 Flash Point Shock Fluid 300cst
FP0350 Flash Point Shock Fluid 350cst
FP2189 Flash Point Chassis Protective Sheet (Clear)
FP010000 Flash Point Diff Fluid 10,000cst
ProTek RC Products Used:
PTK-5117-22 ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh)
PTK-160TBL ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo
PTK-3040 ProTek RC Aluminum Servo Mount Grommet (Black) (4)
PTK-1410 ProTek RC "Premier Blue" O-Ring Grease & Multipurpose Lubricant
PTK-1570 ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz)
PTK-8609 ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (22T)
Hobbywing Products Used:
HWA30112617 Hobbywing Xerun XR10 Pro G2S Elite 160A Sensored Brushless ESC (Midnight Silver)
HWA30840005 Hobbywing Module-X Modified/Stock Non Polarity Capacitor Module
HWA30401110 Hobbywing Xerun V10 G3 Competition Modified Brushless Motor (7.5T)
1UP Racing Products Used:
1UP190436 1UP Racing Heatsink Bullet Plug Grips w/5mm Bullets
1UP120504 1UP Racing Pro Ball Differential Grease Combo (Gold & Pink)
Klinik RC Products Used:
Klinik RC Mugen Seiki MSB1 1/10 Buggy Titanium Top Screw Set (73)
JConcepts Products Used:
JCO4047-06 JConcepts Smoothie 2 "Thick Sidewall" 2.2" 2WD Front Buggy Tires (2) (Silver)
JCO4017-06 JConcepts Smoothie 2 2.2" Rear Buggy Tires (2) (Silver)
JCO0504 JConcepts Carpet/Turf/Dirt Pre-Cut High Clearance Wing (7" Wide)
Futaba Products Used:
FUT01102152-3 Futaba R334SBS-E T-FHSS SR S.Bus2 4-Channel 2.4GHz Receiver
FUT01004395-3 Futaba 7PXR 7-Channel 2.4GHz T-FHSS Telemetry Radio System
Team Associated Products Used:
ASC91941 Team Associated 13mm Front Shock Spring (Grey/3.4lbs) (44mm)
ASC91949 Team Associated 13mm Rear Shock Spring (Grey/2.01lbs) (61mm)
Chapters:
00:00 Intro
00:45 What's in the Kit?
04:36 Under the Hood
07:45 Other Optional Parts
09:48 Notable Features
15:32 Build Review - Auta a dopravní prostředky
Awesome video. There is not a lot out there on the MSB1 hope you can do some more.
I will be this fall when indoor season starts back up. Thanks for watching and glad you enjoyed it!
TLR has been doing the front trail inserts since the 22 3.0. In fact, the Mugen spindles look a lot like the TLR versions.
Pretty much the whole car looks TLR
Good vid. Just built mine. Agree build was smooth and fast. The only issue I had was the last step in getting lower front shock eyelet into the front arm. Super tight had to dremel a little. Mine is gonna be for carpet. Shock package and sway bars I suspect will be too soft. Looking forward to testing this week
I didn’t have to dremel mine but yes the shock eyelet had to be lined up perfect and it dropped right in. Took a bit. Everything is in the kit is tight and fits just right. No binding.
@@DirtConcept lol I tried a bunch of times and my dremel was laying there..just did a quick pass and they slid in. But I had zero issues. Car is so nice. Innovative but not over engineered like the brand I came from.
@@DirtConcept whether the gear parts (idle gear and diff gear when plug in together so tight?mine is soo,,not like b7
@farhanzayidkendar2084 the drivetrain frees up with a couple break in runs. Mine spins freely no bind
Hello, great video! I just got my kit but didn’t build it yet. Where did you purchase the Mugen Seiki aftermarket or optional parts such as titanium turnbuckles? Thanks ahead!
Thanks! I purchased the optional components directly from Mugen Seiki. www.MugenRacing.com
Where did you buy your extra parts from? Cant find part numbers for aluminum steering rack, brass servo and electronics weights etc
Thanks for the feedback. I’ll add part numbers to the video description. You can find all of these items on www.AMainHobbies.com and www.MugenRacing.com
Hi sir, I finally got around the building my MSB1 up. The front axel and bearings where front wheel attach seems to have a lot of play. Around a 1 mm play. Is this normal? Thank you in advance!
No, that’s not normal. Sounds like you are missing the 1mm front axle shims that come in the kit.
@@DirtConcept thank you for the quick reply. I’ll have to go back. I was using a small bluish aluminum washer but I may have swapped some parts by accident. You are right I. The instructions could be better. Thank you!
will the ae 6.x body and wheels fit this kit?
Rear wheels yes, front wheels no. Body, no.
Just wondering if this kit is manufactured in Japan?
Yes.
What is your race ready weight?
1580 grams.
What wheels you using
In the video I’m using modified JConcepts standard width front wheels. However, Mugen’s wheels fit without requiring any modifications. There’s a list of compatible front wheels on Mugen Seiki’s Facebook page.
When you said modified you did some trimming?. I heard you can use zero /standard offset that what Adam drake said. I have a set of proline for team associated but it does not mention anything about offset. Sorry to much question my first 2wd.
@@j-1lokes294 I dremeled the wheel’s hex down 2.5mm so it clears the steering block.
This video is super helpful as I am getting into the hobby and starting with an MSB1. Forgive the basic question but what wire are you using, and connectors? It looks super clean and I am going for a similar approach.
1up bullets with heat sink covers
13ga wire
@@DirtConcept Thank you!
the front end looks very familiar🤔
It is easy to apply a blanket statement since it may appear that way on the surface, however, the geometry and components are much improved and optimized for this specific platform. Worth noting is the 13mm shock absorbers, beefier composites, adjustable steering block arms, 3.5mm turnbuckles, and the quick change stabilizer bar. To name a few items.
No doubt, this buggy definitely feels high quality and has many interesting new features to the 1/10 2wd world. 👍
@@DirtConcept no doubt about that and mugen def made a good move for having the easy access diff over the TLR