i just love everything about this video. "annoyingly reflective", the plague doctor mask, the fact that it took him like, a second to open the lock... so iconic xx
I just noticed the comedy glasses! Or whatever you call those glasses with the goofy nose and fake mustache, I don’t think they have an official name in English, and that’s my first language!
@@xistencestudios8904 these companies don't have any grounds to sue him. Picking your own locks isn't illegal and he's not hindering their business any more than any old Google review would. Edit: @Destru has mentioned that it could be to avoid possible harassment in the court systems, which can be very expensive and unfortunately possible. But another reason could just be simple privacy. There's a terrifying amount of information you can get about someone from their picture/name.
My father bought master locks for his trailer and went to get the keys to open them, by the time he walked back to the rear of the trailer from the truck cap I had both locks open and latches undone
I have a chinesium padlock I got from a dollar store that rakes like this one: Stick it in, zip it out -> open. I expect Master Lock to get in gear and beat this. To truly be the Master of Pathetic the lock has to pop open on its own as soon as you insert the tension tool... Just saving a few more cents on the production should get them there soon.
I'm not surprised you appear to be heading off to a masquerade party for New Year's Eve. 😅 In all seriousness, thanks to Master Lock for inadvertently providing insight on LPL's light set up - it's a rare thanks/credit, but they get it this time!
Haha... in the LPL nice guy voice “ it’s hard to imagine any lock that resists picking less than this one” as he smiles at master lock and flicks them on the forehead 🤣😂🤣
"It's hard to imagine a lock that resists picking less than this one." Absolutely eviscerated... Honestly, aren't most hitches going to have the little latch that slides forward that you put a pin in to actually keep it connected to the ball? If you're going to lock it, can't you just put a ball inside, latch it, and put a lock through instead of a pin? If it's just going to be an ordinary keyed lock then I don't see how this would be any more effective even if it *couldn't* be picked by just shoving a pick inside and doing nothing else.
Yes you can put a ball inside and latch it then lock the latch. However, if you look at the design of the hitch, there is a bolt/nut that adjusts the tension of the hitch on the ball by moving a plate closer to the ball. This could be relatively easily adjusted so the ball that is inserted can be removed and then tightened against the ball on the vehicle taking the trailer. I helped my dad do this once when the lock on his trailer was rusted so bad it would not unlock. We had to cut the lock off when we got the trailer back home.
I am a retired lawyer, but don't worry my lock picking skills are only up to raking. I just can't get to the pin picking stage. Oh and the relevance to this video is that my daughter has one of these hitch locks. I may have to go show her how easy it is to defeat the lock. Thanks for your wonderful videos; it is a wonderful hobby for an arthritic old guy.
After watching countless of your videos I have learned, If it has "lock" in the branding/name then with enough effort/time is really just there to offer a false sense of security. Then only thing that is locked in this universe is what is on the other side of a black hole or will that just be picked/decoded in due time too?
Thanks for posting this. I have the identical lock on my Sea-Doo trailer and lost the key. After seeing this I bought an inexpensive pick set from Amazon. I have never before picked a lock but this one came open for me just as you demonstrated and in the same amount of time. Thanks again.
I was looking for a lock. This came across. I thought this guys good. Since I had one of these, I thought try it. Figure I would have zero chance. Made a tension tool and thin spring steel pick. It took me longer to make the tools than to pick it. Shocked. First lock I ever picked. Who knew.
Can't remember how I found your channel, all I know is I'm super addicted to your professional, easily digestible content. I've been binge-watching so many of your videos because they're so well made! Keep up the great work!
I had a small (14 foot) boat and trailer, stored in an apartment house parking lot, stolen in about 1970. My only security was a Master Lock padlock on the trailer ball latch and the thief or thieves cut the shackle. I bought another boat and trailer to replace it, and installed a, then current model, Master Lock trailer coupler lock. It seems like it was more robust than the model 377DAT in the video, with its fairly standard 4 pin tumbler cylinder. I parked the trailer in a more secure location and supplemented the lock with a boat tilt alarm, which activated the boat's horn. That boat was not stolen and served me well for many years, before my lifestyle changed and I sold the boat.
Ha. Had this junk on my trailer. Total junk. Not only easy to pick but also east to break with a crow bar. I now use a proven industries hitch lock. It uses a puck lock that I'm sure you could pick but being a 6 pin lock that's totally surrounded by 1/4 inch steel is way better that this master junk.
Jim B not surprised. I was shocked when he said it was chrome plated zinc. Zinc isn’t known for its strength, you could probably snap that thing going over a rough speed bump.
We use these on our trailers at work. But we also use a wheel boot at the same time. It's not about fully stopping the thief, just making it take more time than they want to spend on it.
@@pileofstuff 3 seconds to rake it is not much of a delay IMO. I also opened one of these with a metal zip tie in 15 seconds when we couldn't find the key.
I have a question about rv locks that replicate your tow vehicles lockset. It reminds me of the TSA mindset of master key holders. I’m still trying to nail down the question but it sure is a bugger to me. Thank you for an always lighthearted and thoughtful episode.
I wondered about the mask-comments and had to watch the video again. I didn't notice it the first time, I was just laughing at Master Lock and then a second time because of the mask. ;)
As soon as the video started I could barely hear the LockPickingLawyer, but zeroed in on the shiny and chrome reflection. Sweat beaded on my brow as I frantically yelled 'ENHANCE!' aloud for no helpful reason while I zoomed in to find a mask. A fine prank to end the year.
Hi, I love your videos especially the ones about padlocks. Since I am using that and chain on my bike, could you please make an episode about different chains? That would be great!
I wonder if some engineer from Master lock are looking at your review of this vid I am sure that there jaw must have drop to the floor when they saw how easy it was to pick LOL
The were probably amazed that it took him that long to rake it. They didn't think the lock was that good. After all, they designed it, so they *know* it's a piece of shit.
In all of the videos I’ve seen of yours, I’ve always heard of the bad locks. Is there any videos of the good locks? Any suggestions when purchasing locks? What are the best locks for specific applications?
LPL seems to focus on bad locks, but easily deals with security pins. Yet there are (videos about) useful models from Abloy or Bowley. A good lock would be a Master Lock, but melted and forged into a brick's shape. 😅 Hardening would be nice, too.
Thank you for the video, shame to see more people looking at you then the total failure of this Master lock. I didn't even notice the reflection till after I read the comments.
Hi Reddit! Also, several of my friends and I all have the smart locks (Samsung and Schlage) it would be great to see you play tempting those. The Samsung my buddy has has everything from biometric to key to key code. Great vid, thanks.
They've always been little more than a psychological barrier. 40 years ago my job was servicing equipment secured with various wafer locks. Rather than source and carry dozens of keys, I had a rake and tension tool on my key ring.
It's a deterrent, not a sure thing. A thief will open literally any lock you can possibly buy, it's just not possible to make a completely unbreakable lock. They're meant to keep honest people honest or sightly slow down/possibly stop thieves by having them decide to move on rather than try to break the security. Only a fool buys a lock to stop a thief, because only a fool believes any basic level of security will stop a dedicated or skilled one.
I have been having trouble finding this lock lately. When coupled with a lock passing through the ball hitch latch, it seems to be enough of a deterrent to keep thieves away. A breeze to pick though. On both the positive and negative side, the lock is prone to freezing up from water intrusion. Without heat, Winter pickers will have a hard time removing this lock.
This is why my boss doesn't even bother locking his trailers up. They're on about 15 cameras so either they'll catch who did it, or insurance will cover a new trailer.
![[932] More PacLock Products Coming to Home Depot](http://i.ytimg.com/vi/-W8N06QqK8A/mqdefault.jpg)
![[932] More PacLock Products Coming to Home Depot](/img/tr.png)
![[60] The Worst Lock in the World Abused](/img/n.gif)
i just love everything about this video. "annoyingly reflective", the plague doctor mask, the fact that it took him like, a second to open the lock... so iconic xx
That's a mask? I just thought he was Jewish.
Ah! Masterlock’s plan to expose your face failed horribly. Smart LPL :p
"Master" myaff.
Nice ... face
@@Jako1987 recent rhinoplasty
Tonio K. imitation mask :)
Masterlock failed even in that. Lovely mask used by the layer saved him (this time? :)
"Annoyingly reflective " best part of this lock.
That was funny as fuck.....
Thieves see their own faces and turn back
maybe that was masterlock's attempt to get him to skip it? "he won't try to pick it if we make it so shiny you can see his face!"
It's part of the security, it blinds potential thieves so they can't see the lock to pick it in the first place.
I just noticed the comedy glasses! Or whatever you call those glasses with the goofy nose and fake mustache, I don’t think they have an official name in English, and that’s my first language!
Now we know why he doesn't show his face on camera...
You mean because Master lock would probably have him assassinated?
@@noreason2701 probably to get away from the many many law suits these companies want to put on him
@@xistencestudios8904 these companies don't have any grounds to sue him. Picking your own locks isn't illegal and he's not hindering their business any more than any old Google review would.
Edit: @Destru has mentioned that it could be to avoid possible harassment in the court systems, which can be very expensive and unfortunately possible.
But another reason could just be simple privacy. There's a terrifying amount of information you can get about someone from their picture/name.
With a nose like that, i'd hide my face too!
@@Killerlocust49 If i recall, Bill had to delete his vids about Abloy because lawsuits?
Now i imagine you using this mask every time you pick a lock...it's your lockpicking mask, +5 to lockpicking skill
I have to imagine this mask also prevents lockpicks from breaking
Or protection when the hydrolic cutters exploded
That ain't no ordinary mask, das the fucking gray cowl
@@timmaybach8158 its ugly but the stats are worth it
The mask gives him a bonus to stealth, which in turn affects his lockpicking skill.
1:06 rake enters lock
1:06 lock opens
Security 💯
Most people will have a harder time picking their nose compare to picking that lock lol
Especially if you are wearing a mask.
I'd be one one of those people lol
I just started picking my nose.
Can confirm. That stubborn fucker way up the canal that takes a pipe snake to get out.
Yup... didn't clip my finger nails and scratched the inside of my nose... now my nose is filled up with blood.
Why do they even include keys in the package. It is faster to rake, than finding the key
I thought the rake was the key, though.
My father bought master locks for his trailer and went to get the keys to open them, by the time he walked back to the rear of the trailer from the truck cap I had both locks open and latches undone
in case you lose your rake
It is really unfair to use a rake chosen to match the shape of the keys. 😆
Halberdin I bet that anyone can rake it open by using a real garden rake.
Lost it at the mask :))))
That's no mask. The is the Bird-Lawpicking Lawyer's channel.
The whole 2 minutes was trying to figure out what kind of mask he got on !!lol
I think a paper bag with holes in it would’ve been a better choice of mask
You kidding? Lol that mask was gold lmao
I think the bag would a better choice of lock
@@rnemovr59 Nobody's gonna argue with you there. Lol
Then he would be known as the unknown lock picker.
You’d think by now they’d actually test their locks
They do. They just think that people are stupid enough to buy them. And, they're right.
@@misterhat5823 that people aren't informed about how easy most locks are defeated*
Couldn't have said it better myself, FBI
As long as people continue buying them, there's no need.
To use it properly you have to leave it on a salty Canadian winter season. Then the lock will be un pickable. I know this from experience. Lol
Well, it seems he's doing a torch video later.
but would it still open with the key in that case?
Wow thats the fastest pick ive ever seen well done mate
Well, thats because it´s only a LLO - lock like object. A zip tie is more secure.
I guess it was dead-scared by the preceding rehearsal.
I have a chinesium padlock I got from a dollar store that rakes like this one: Stick it in, zip it out -> open. I expect Master Lock to get in gear and beat this. To truly be the Master of Pathetic the lock has to pop open on its own as soon as you insert the tension tool... Just saving a few more cents on the production should get them there soon.
@@andersjjensen your comment had me laughinh so hard. someday theyll get there...
We now know why he tries to pick locks.
A mask is locked on his face.
He doesnt try, he does.
Man in the Iron mask?
He's the real life Dollface, only he doesn't have to play Calypso's game to get the key.
We’re all just lock pickers, trying to unlock the potential that’s locked away inside of us
Drinkyoghurt r/Im14andthisisverydeep
I'm not surprised you appear to be heading off to a masquerade party for New Year's Eve. 😅
In all seriousness, thanks to Master Lock for inadvertently providing insight on LPL's light set up - it's a rare thanks/credit, but they get it this time!
LPL: Hahahaaa... love your sense of humor! This piece of metal is a master joke...”let’s do it a couple more times!”
Haha... in the LPL nice guy voice “ it’s hard to imagine any lock that resists picking less than this one” as he smiles at master lock and flicks them on the forehead 🤣😂🤣
"It's hard to imagine a lock that resists picking less than this one."
Absolutely eviscerated...
Honestly, aren't most hitches going to have the little latch that slides forward that you put a pin in to actually keep it connected to the ball? If you're going to lock it, can't you just put a ball inside, latch it, and put a lock through instead of a pin? If it's just going to be an ordinary keyed lock then I don't see how this would be any more effective even if it *couldn't* be picked by just shoving a pick inside and doing nothing else.
Yes you can put a ball inside and latch it then lock the latch. However, if you look at the design of the hitch, there is a bolt/nut that adjusts the tension of the hitch on the ball by moving a plate closer to the ball. This could be relatively easily adjusted so the ball that is inserted can be removed and then tightened against the ball on the vehicle taking the trailer. I helped my dad do this once when the lock on his trailer was rusted so bad it would not unlock. We had to cut the lock off when we got the trailer back home.
Once I spotted the key for this lock, I knew you were going to rake it fast! You have taught me well 🤙🏼
This guy is single handedly putting MasterLock outta business
I wish.
"relatively unskilled attack" man it looked like all you did was put the rake in and it opened xD
I couldn't believe how fast he opened that, literally as fast as using the key
Nah, it was probably faster.
All talk about seeing his face, remember when he visited bills house. He didn’t hide his face then, last year I think?
Denny Skerb when? I do t need sleep, I need links!
I thought it only showed the back of his head.
I am a retired lawyer, but don't worry my lock picking skills are only up to raking. I just can't get to the pin picking stage. Oh and the relevance to this video is that my daughter has one of these hitch locks. I may have to go show her how easy it is to defeat the lock. Thanks for your wonderful videos; it is a wonderful hobby for an arthritic old guy.
Now that master lock know how you look, they will send the assassins after you.
@D.O.A. r/murderedbywords
After watching countless of your videos I have learned, If it has "lock" in the branding/name then with enough effort/time is really just there to offer a false sense of security. Then only thing that is locked in this universe is what is on the other side of a black hole or will that just be picked/decoded in due time too?
Thanks for posting this. I have the identical lock on my Sea-Doo trailer and lost the key. After seeing this I bought an inexpensive pick set from Amazon. I have never before picked a lock but this one came open for me just as you demonstrated and in the same amount of time. Thanks again.
Never thought I'd be soo fascinated by a channel about padlocks. You've earned yourself another subscriber.
Thank you Lawyer, from now on I will secure all my stuff with cement and wait for it to dry.
Excellent mask
Actually that's his face.
I’m super glad you’re doing the trailer locks!!! This has been a thorn in my side.
I was looking for a lock. This came across. I thought this guys good. Since I had one of these, I thought try it. Figure I would have zero chance. Made a tension tool and thin spring steel pick. It took me longer to make the tools than to pick it. Shocked. First lock I ever picked. Who knew.
Lmao ... whos polishing these knobs down at master lock
I think that's fundamentally their problem, polishing their own or others' knobs instead of designing effective security devices.
They polishing it to reveal LPL's face, unfortunately, he is one step ahead of them
Who ever it is, they're the only one doing a good job
Nice video. Also nice mask. Lol.
Can't remember how I found your channel, all I know is I'm super addicted to your professional, easily digestible content. I've been binge-watching so many of your videos because they're so well made! Keep up the great work!
I had a small (14 foot) boat and trailer, stored in an apartment house parking lot, stolen in about 1970. My only security was a Master Lock padlock on the trailer ball latch and the thief or thieves cut the shackle. I bought another boat and trailer to replace it, and installed a, then current model, Master Lock trailer coupler lock. It seems like it was more robust than the model 377DAT in the video, with its fairly standard 4 pin tumbler cylinder. I parked the trailer in a more secure location and supplemented the lock with a boat tilt alarm, which activated the boat's horn. That boat was not stolen and served me well for many years, before my lifestyle changed and I sold the boat.
I’ve always wondered what you looked like, now, I think you’re my Uncle?😲
Ha. Had this junk on my trailer. Total junk. Not only easy to pick but also east to break with a crow bar. I now use a proven industries hitch lock. It uses a puck lock that I'm sure you could pick but being a 6 pin lock that's totally surrounded by 1/4 inch steel is way better that this master junk.
Jim B not surprised. I was shocked when he said it was chrome plated zinc. Zinc isn’t known for its strength, you could probably snap that thing going over a rough speed bump.
We use these on our trailers at work.
But we also use a wheel boot at the same time.
It's not about fully stopping the thief, just making it take more time than they want to spend on it.
pileofstuff check out proven industries hitch locks. A little on the high price side but so worth it
@@pileofstuff 3 seconds to rake it is not much of a delay IMO. I also opened one of these with a metal zip tie in 15 seconds when we couldn't find the key.
Their locks cost more than my trailer.
I have a question about rv locks that replicate your tow vehicles lockset. It reminds me of the TSA mindset of master key holders. I’m still trying to nail down the question but it sure is a bugger to me. Thank you for an always lighthearted and thoughtful episode.
Just picked this lock and looked on youtube to find that you've done a video on it! Very cool!
Looks like someone is getting ready to go to an eyes wide shut party.
I found you using CTRL+F eyes wide
Devil is in the detail! Holy crap that's gonna give you nightmares... o.O
The lock or the "face"?. 😎
@@Halberdin what do you think? 😏
I've used those in the pass. Now I'm REALLY grateful it didn't get stolen. Thanks for the video! A new subscriber now.
This has to be a record breaking wave rake pick. “Advanced locking mechanism for the easiest pick imaginable”
I will never use any of these skills yet here I am day after day.
I wondered about the mask-comments and had to watch the video again. I didn't notice it the first time, I was just laughing at Master Lock and then a second time because of the mask. ;)
Totally respect your anonymity & still happy to see your posts.
happy new year mr. Lockpicking lawer! :D
Like how all of the top comments where about that mask xD
Well it was more interesting than the lock, and probably harder to remove ;)
LMAO, I'm betting some lock companies are stressing out every time one of your videos comes out.
As soon as the video started I could barely hear the LockPickingLawyer, but zeroed in on the shiny and chrome reflection. Sweat beaded on my brow as I frantically yelled 'ENHANCE!' aloud for no helpful reason while I zoomed in to find a mask.
A fine prank to end the year.
I can't stop laughing because of that mask man, too smart!
Fill lock cylinder with superglue....that'll stop pick attacks.
Aint nobody gettin my trailer!
lmao nice mask
kmlkmlikj love your vids 😁
Hey everyone, just a quick FYI if you turn up the volume to max, towards the end theres a mic drop.
You rock that mask man, beautiful!
I foresee a class action lawsuit in Master's future.
hope so.
I agree, I got a Master lock with "25 million combinations" and 5 dials 1 through 10. 10^5 is only a quarter of a percent!
(edit: fix number of dials)
@@thorlancaster5641 not a quarter of a pct, but 4 pct.. 1 million /25 million equals 4 / 100, forget the million on both sides
@@harrickvharrick3957 I mistakenly said that the lock had 6 dials. It only had 5. Fixed.
Are you even raking it? Looking at the key it looks like even the back of a pick would align the wafers
no he raked it but if watch carefully the pins actually align when he first puts the rake in just like if he had inserted the key
I was going to say, the key bitting on this particular lock looks like it could probably be picked with a nail file just as quick.
You can use a toothpick to pick it and a zip tie to zip it and a rake stick to break it.
He didn't rake it, he used a bump key which bounces the pins makeing the openings big and so on.
@@connorObye I don't think you're commenting on the video you think you're commenting on.
"Annoyingly reflective". I love it
Hi, I love your videos especially the ones about padlocks. Since I am using that and chain on my bike, could you please make an episode about different chains? That would be great!
I wonder if some engineer from Master lock are looking at your review of this vid I am sure that there jaw must have drop to the floor when they saw how easy it was to pick LOL
Steve Normandin if they’re surprised by how easy it is to pick a masterlock then they should get out more.
The were probably amazed that it took him that long to rake it. They didn't think the lock was that good. After all, they designed it, so they *know* it's a piece of shit.
“Engineer” lol
yeah, I am thinking their own non-lockpicking lawyer looks into em rather
Their only care is sales, thus the shiny surface, much like fishing lures catch fishermen. Good job LPL
Ahh, it´s a monster!
No wonder you were able to cut the Lite Lock just like that ...
The the plague doctor mask is a nice touch, suits the skills.
Now everything makes sense, I knew no mortal human could possess the superhuman lock picking skills such as LPL XD
My only question, what type of mask were you wearing? :D
looks like some weird plaguedoctor clown or pterodactyl skull mask
Wait...is this why his voice sounds so nasal? Now i have to go watch the BosnianBill collab video to check the voice. :))
You'd never pick it.
Groucho Marx
Venice bird mask
In all of the videos I’ve seen of yours, I’ve always heard of the bad locks. Is there any videos of the good locks? Any suggestions when purchasing locks? What are the best locks for specific applications?
LPL seems to focus on bad locks, but easily deals with security pins. Yet there are (videos about) useful models from Abloy or Bowley.
A good lock would be a Master Lock, but melted and forged into a brick's shape. 😅 Hardening would be nice, too.
Please watch his video on 10 best padlocks: czcams.com/video/L6iMmCSayBQ/video.html
Wow! Thank you! I almost bought one of these.
That key bitting looked like it was all within 2 points of the same depth - crazy
Thank you for the video, shame to see more people looking at you then the total failure of this Master lock. I didn't even notice the reflection till after I read the comments.
Details my friend details we just have very good eyes
What a joke that lock is. LOL
Glad to know a medieval witch doctor was behind the camera the whole time.
Hi Reddit!
Also, several of my friends and I all have the smart locks (Samsung and Schlage) it would be great to see you play tempting those. The Samsung my buddy has has everything from biometric to key to key code.
Great vid, thanks.
Bloody hell! Wafer locks need to be banned..... while they're at it, ban Master Lock too!😆🍺😎✌
They've always been little more than a psychological barrier. 40 years ago my job was servicing equipment secured with various wafer locks. Rather than source and carry dozens of keys, I had a rake and tension tool on my key ring.
It's a deterrent, not a sure thing. A thief will open literally any lock you can possibly buy, it's just not possible to make a completely unbreakable lock. They're meant to keep honest people honest or sightly slow down/possibly stop thieves by having them decide to move on rather than try to break the security.
Only a fool buys a lock to stop a thief, because only a fool believes any basic level of security will stop a dedicated or skilled one.
More videos featuring the mask!
Clicked LIKE the second I saw the mask! Saves all that editing!
I was wondering if you could shot open an reinforced lock like they do in movies? Is there anyway you could test this?
Hahahah my man, that mask is incredible.
Do you have a mask on? :D
No. That is very insensitive of you. ;-)
No.. hes obviously a bird
I have been having trouble finding this lock lately. When coupled with a lock passing through the ball hitch latch, it seems to be enough of a deterrent to keep thieves away. A breeze to pick though. On both the positive and negative side, the lock is prone to freezing up from water intrusion. Without heat, Winter pickers will have a hard time removing this lock.
I thought that I'd be able to see his face in the reflection but alas, he wears a mask. Well played LPL, well played
Looser than my ex wife!! (i miss her so much!!)
it looks like boris brejcha hahaha
haha ikr
Or Claptone
Love it when the bitting is all exactly the same height. It’s like they don’t even try to make a good lock.
(Puts a piece of metal inside) (the lock falls open) I laughed out loud at the speed of it. Not even an actual raking, just a small feather flip.
Weird mask
Venice bird mask
beetlejuice, beetlejuice, beetlejuice,
You know a lock is bad when you are absolutely shocked at how fast LPL picks the lock
Crazy, how fast that came open!
Thanks for the video, Daffy.
It sorta makes sense that a Comic-Book Villain would be teaching us all how to pick locks...
This is why my boss doesn't even bother locking his trailers up. They're on about 15 cameras so either they'll catch who did it, or insurance will cover a new trailer.
This is by far the best face-reveal I've ever seen.
Dude, I didn't knew you were a Luchador... That was some good lucha thing right there
What do you recommend for a tactical handgun backpack? It has lockable zippers but seems pointless especially since everything is TSA
What a way to end the year. I gotta play a sad video, my tummy hurts.
Wow that's easier than picking your sister diary lock back in the day lol.
I like how the only comment he makes about the mask is that the lock is "annoyingly reflective". Very professional.
Nice mask ;-)
Keep up the great work.
If only I had a dollar every time I saw a video with Terrible next to a Master Lock product.
That disquise is fantastic