Front Runner x DiamondBack Rack System | Install and Review
Vložit
- čas přidán 11. 05. 2023
- Unboxing, install, and initial review of the Front Runner x DiamondBack Rack System on my 2020 Toyota Tacoma TRD Off-Road...links below...
Front Runner DiamondBack Rack System ► bit.ly/3Mj9FjF
Billie Bars ► bit.ly/3AqD7x2
Dewalt Drill ► amzn.to/3OcRLAe
Bit Set ► amzn.to/3NZEtHr
Step Bit ► amzn.to/42NJcQH
Deals, Product Links, and More ► / gearknowhow
Camera Equipment used
Main Camera ► amzn.to/367dC2O
B-Roll Camera ► amzn.to/3pCmo59
GoPro ► amzn.to/2sHhEk2
Main Mic ► amzn.to/3866C8t
Back-Up Mic ► amzn.to/2PeYmKI
Lav Mic ► amzn.to/34TbVpF
Tripod ► amzn.to/2sOISFC
Small GorillaPod Tripod ► amzn.to/349sdfY
Lighting ► amzn.to/35YDgXE
My Favorite Products on Amazon ► amzn.to/31ZPL61
Subscribe ► / gearknowhow
Instagram ► / gearknowhow
Facebook ► / gearknowhow
Twitter ► / gearknowhow
*Disclaimer* Some of the links above are sponsored and a portion of the sales goes to supporting the channel
**Please note this video is for educational and entertainment purposes ONLY and complies with ALL of the CZcams community guidelines. Video production was performed in a safe manner at a designated and closed range. - Zábava
Just got mine in yesterday and haven't installed it yet. Your video definitely gave me a bit more confidence to install this on my own, because it is daunting to have to drill holes into such an expensive cover. Happy camping!!!
This is a fantastic video. Thanks so much! Looking forward to doing this to my truck
Great video, some of the diamond back covers have spots marked underneath showing where to drill the holes. I believe there is the letter “F” and a 0 next to it which is where you drill.
Great vid! Ty
This is great, thank you
Thank you!!
There is a video on CZcams where a guy added 2 gas struts and a bracket to make it to where he could open his rear cover with the tent on.
What?! Where! Wheres the link
If you want the "proper" tool for the anchors, it's called a "Rivnut Installation Tool". Probably not worth it for this project alone, but they are extremely handy for fab projects.
Useful review. Thank you. A question. I realize the HD has a 1600 lbs capacity on top, which is great, so you can say put a camp top up there. But what about the water/weather seal around the periphery of the cover, how will that hold up if you are regularly or every so often compressing it to the max when heavy weight on top, even a camp top with a heavy man or two adults sleeping in it? Will that water/weather strip continue to work at 100% effectiveness? Can the water/weather strip be replaced and will that replacement be just as effective? Other? Thanks. Oh, and any risk of those holes you drilled in the cover leaking? Thanks again.
Did you get rid of the rough country tonneau cover? I'm looking at it so just wondering if you had issues with it. Thank you.
No issues with it! Just upgraded to the Diamondback to use with racks and rooftop tents
Clean install. I see you went with the SE model and I see that saves four hundred bucks! I was wondering what size then are you putting on top? I want to get the same set up and was worried about weight. My wife and I and two small dogs would be it! tks for the video
Right here >>> czcams.com/video/_qzU0Sg-G8s/video.html
Is the Diamondback a SE model?
@@GearKnowHow
@@niteranger6376 yep
@@GearKnowHow Cool, then it will support the weight. I was worried about the static weight on top of the cover
If this was designed for the diamondback, why the issue of some of the bokts in precarious licatiins rubbing against structure under lid....lol.....not cool!
What state you in, install mine 😭😭
I ordered this kit for bike carriers with my Diamondback HD and I badly regret.
I should have watched this before adding it to the order.
My reason is the stupid mount to the rails. I wasn’t aware you bolt this on and can’t just take it off if you don’t use it and throw it back on in a minute. That’s on me and might not be a big deal for others.
Sounds like you want the quick detach Yakima rail system instead. This setup appears to be 4 bolts per support to get it to come off.