Video

Thanks for sharing your install video. I have a question; I started putting my SE on my TRD OR, I removed the bar going across the bed with the 5 torx screws and I installed the foam seal across, then putting the cross bar back I was having a hard time putting the torx screws back on because the foam seal made it difficult to align the screw holes and the only way I got it to work was to flip the cross bar around. Did you also have to do the same thing. It was really hot in my garage so I’m gonna have to finish it tonight and hoping flipping the bar around will not make any difference as far as the completion of the cover install. Thanks

>>>PARTS LIST<<< Gas One Mini ► amzn.to/3YhQblQ Butane Canisters ► amzn.to/4feh9Ro Coleman Dual Burner Stove ► amzn.to/3LzEpfd Coleman Single Burner Stove ► amzn.to/46fblmB Backpacking Stove ► amzn.to/3YfoNoq High Altitude Liquid Fuel Stove ► amzn.to/3LCoyMI GSI Outdoors Kettle ► amzn.to/3LDnw30 GSI Outdoors Frying Pan ► amzn.to/4bUUC9u Gerber Camping Utensil Kit ► amzn.to/4bYcf88

Seen complaints of inadvertent pwr sw activation (Like, even from weapon bein laid onits side!), enuff to knowit waza thing. Msg'd Burris, n they tried to sayit was only certain gun/light combos, which don't hold water. They said they'd raised switch shroud, in later models, which will help, butit seems like an incomplete "solution", azit seems pretty clear tha switch it too easily activated. FYI, tha next click down, from "auto" is OFF. Fastfire C seemed like an attractive low-cost option, but, this issue's a deal-breaker for me! My intended purpose for this dot, was my Mossberg 940, which would likely not suffer from inadvertent activation. But! Who knows where I might wanna mountit, intha future. The Holo 407K's tha 1 to beat, at this price point, and it doesn't have this issue...

Is the bridge just to download the app? I mainly just need a light with a good motion sensor, what would I need the app for in terms of just light ?

Injection molded plastic

Got one for the Glock 19 but I would love one for my p320

Anyone knows the new app to download for this drone?? The original one don't exist

STUCK??? Go to @2:11 <<<<FIXED IT!!!!!!

Why the hi point handle .?

Get on with it ...

Could you clear it by shooting a blank? Since it’s just powder it should function without a pressure spike?

OUTSTANDING video. thank you

I have a 36cal brass frame that is great shooting and with decent power.

>>>PARTS LIST<<< Swampfox Sentinel II ►www.swampfoxoptics.com/sentinel-ii-micro-red-dot Swampfox on Amazon ► amzn.to/3WvuZaD PSA Dagger Micro ► alnk.to/8EJDlEt

Does the orientaTION change when you flip it upside down?

Absolutely Fantastic !!! Thank you very much...

OK that’s cool but why the fuck is it $500

I didn't like the cheap gloss black paint and the grips were to sharp in spots. The non blowback is much better. And FPS is 25% higher.

Love my M9 first first gen. My son 3D printed the claw style light mount. If you find an original it will cost as much as the firearm.

thanks! just put mine on with ya :)

Thank you!

I just installed my Garmin Dash Cam Mini2 why the green light on all the times when I get out turn off the car still green no red light ..? Thank you.

Look at the new vortex defender line.

HAVE CONDER RIG 6O OF THEM

Any chance you know if this would fit a 2010 ford escape? It’s a mid size SUV

no back brushing??

would you prefer or suggest the 18650 variant for longer run time and not much more length?

I always thought that the two pipes out the back of the top of those were for overflow/fill. Mine had rubber covers over them, and I just found that they are solid. What are those things for????

Great review very helpful thank you.

Dude! Thank you for showing that last part!! Me and a buddy were over an hour trying to get that in. The manual needs an update! Thanks again!

For any THE FINALS players does this look like the V9S

After finding one of these 2nd hand (99% new) on a FB group, back in Feb. '24, I see no reason to buy any "cheaper" than PA optics. They just work and are 100% covered if you get it to now work. Now I just gotta get my magnifier a mount to match up the lower 1/3 of the RDS.

Thanks for coming by and shooting with us! Great to see you.

9 years later and this video is still doing wonders. Lol. Best video explaining and showing this horrifying process. Thanks for the help!

Thanks bro

I use grease on that slide plate and the bolt. Mine whats rough and that was the charging handle

Great thing to cover. Good idea and reminded me how I replaced the glass in mine with wire mesh so the glass can’t break …ever again. I might do a video on that

can I hunt a deer with these things legally in muzzleloader season if I get one of there rifles?

I got kinda skinny legs, im wondering if that will be to loose on me ?!?

34$ 😡 but they wunna charge me 250+ for a xdm/strobe light !BS

Love the dad and son bonding 🔒🙌🏻

I have never had a problem with their lowers. I have a .300 blackout on an Anderson lower and a DDM4 upper on an Anderson lower. Never had an issue. Amazing budget lowers. I recommend keep 3-4 stripped lowers to have on hand (god forbid you need to give one to a friend or family. 7075 T-6 aluminum when tempered is extremely strong.

If you shoot another round will that work also?

Ordered a sprayer from Amazon the other day. $42+tax. I've got 40' of newly installed picket fence to stain. Hopefully, this works as well as i think it will. Did you thin out the stain? I don't believe I need to thin it out.

I have those, but they are our dated and dangerous. It better to upgrade to rechargeable battery, LED lanterns.

My daughter just linked this video to her 4H rifle poster project for the fair. Please don’t take it down. And I hope you get a lot of traffic.

By any chance do you have the link for the drum you used in this video didn't see it in the description

😅love the phrase: Dead body! Lol

does the oil dry off? the cleaning solution/lube on the polymer could affect the grip?

9mm/10mm jakle