ASE A4 Test Prep #1 - Alignment Angles

The ASE A4 Suspension & Steering test will have 11 questions on wheel alignment diagnosis, adjustment & repair. This video goes over the essential alignment information. Know which angles cause steering pull and or tire wear. The alignment angles reviewed in this video are camber, caster, front toe, rear toe, toe-out-on-turns, the thrust line, geometric centerline, thrust angle, SAI, and included angle.

[@OldSchoolNoe]

Update 3-6-23: I took the test and passed! This video shows the basics of camber, caster, and toe. You should make it a priority to remember the symptoms of too much negative caster or too much positive caster(2 questions). Remember how an incorrect angle causes tire wear.
At 1:47 I give a specification to remember. I did not see it on the test. Cross camber and cross caster were mentioned on the test as possible answers.
The paragraph at 1:51 is accurate. You can be given a list of actual angle readings of camber caster and toe. You would then do the math and find out that camber is negative, out of spec on the driver's side and camber is positive and out of spec on the passenger's side. This condition sounds like a shifted cradle, questions like that (3 questions).
The info about toe starting at 2:30 will be on the test(1 question)
Toe-out-on-turns at 3:14 , like I said in the video, know which components affect this angle, also noise! If this angle is incorrect can it cause noise?(1 question)
Rear toe 3:39 and thrust angle changes is on the test.(4 questions)
SAI 5:04 know the purpose of SAI, this was not really detailed in the video (1 question)

[@jesterborris]

Congratulations! Excellent set of Videos. I really appreciate the refresher.

[@TechsHelpingHand]

obviously you passed. With how well you explained this information a 4 year old that knows nothing about cars would pass. You are an excellent teacher

[@codyshirk1485]

Camber high caster low that’s the way the car will go - good little rhyme to use when diaging alignment issues

[@mariosanchez-ve9tz]

all of the videos were helpful. thank you for the information.

[@chicagoalmighty45th95]

You’re cool.. I wish I would have seen this video when I took my ase test 5 years ago

[@buffkidd2321]

I love this video you explained better than my teacher

[@392smokedogg]

Thank you so much for ur videos I just started as alignment tech and I am very excited to learn I left my cdl a to pick up a digital torque wrench 😂😂😂 I love it to

[@shane2x216]

I had a question the last time I took it that asked what angle should you check for a bent steering shaft after a collision. I believe the answers were check kpi, included angle, caster, and I can’t remember the other one. Any thoughts?

[@coldsteel6667]

Thank you 👍