Video není dostupné.
Omlouváme se.
【TAIWAN T-N.T. STUDIO】VFC M4/416 (Ver.1)/VR16 GBB Retrofit Kit assemble introduction
Vložit
- čas přidán 17. 06. 2017
- 【TAIWAN T-N.T. STUDIO】VFC-M4 FULL HOP-UP RETROFIT KIT (V2)
●Introduction：www.taiwangaote...
This amazing full HOP-UP Retrofit kit was especially developed to replace and upgrade the entire VFC-M4 GBBR HOP-UP structure. With the ongoing demand for quality upgrade parts for VFC-M4 GBBR, T-N.T. STUDIO has developed this HOP-UP chamber which includes all necessary parts including HOP-UP bucking, chamber and inner barrel.
The specially designed HOP-UP chamber can changing different parts to correspond to different types of hand guards,it is no longer necessary to always remove the guard to adjust the HOP-UP!!
(This HOP-UP chamber can suitable for some VFC guide-hop models like : MK18, URG-I or BCM MCMR GBBR, but need to cancelled the guide-hop function and use VFC-M4 gen.1 HOP adjusting method.)
The kit in video was older version chamber, shipments are based on the latest version
TYPE-A contents:
T-HOP bucking *1
HOP-UP chamber *1
HOP-UP lever *1, PIN *1, nub*1
HOP knob w/ spring *1, screw *1
Screws *2
Precision double I/D air-cushion inner barrel *1
TYPE-B contents:
T-HOP bucking *1
HOP-UP chamber *1
HOP-UP lever *1, PIN *1, nub*1
Adjust wheel *1, O-ring *1
Screws *2
Precision double I/D air-cushion inner barrel *1
----------------------------------------------------------------------------
【TAIWAN T-N.T. STUDIO】
●Official website:
www.taiwangaote...
●FaceBook :
/ tnt.studio.tw
●Instagram : _tnt_studio
/ _tnt_studio
○Purchasing methods :
if want to buy any product, or any questions, please pm to our FB ☺
For adjusting the hop you need a 1.5mm allen screw right? You just have to open the gun? Or you need to fully dissesambly all the barrel?
The adjustment method of the original factory is the same, just open the gun, pull out the bolt and use the 1.5mm hex wrench to adjust😀
Hi can this works with VFC SR16 V3? I want to cancel the guide-hop and replaced with Type A (hopup adjustment thru upper receiver).
If i got one do i need to change the original outer barrel too? or can use the ori outerbarrel that meant to be used with its ori guide-hop?
@@nuruddinsani Hello, please PM us on Facebook and we will confirm with you.🙂
Hi there, we successfully installed the hopup and barrel (which were already fitted togeather) into my vfc m4.But were unable to succefully use under 500 fps, as it seems there was jamming in the bucking maybe? So when we were around 350-400 fps it would do double shots and sometimes jam a bb in the barrel and fire a second one out.not sure why this is happening. but I want to be able to use under 500 fps so going back to stock hopup and possibly barrel.
Hi there, our products regardless of the initial speed can be used, so we recommend checking the HOP-UP is too much or not? or can you take a issue photo on FB pm for 趙志明, thank you :)
Do you have this type of adjustment system for ghk AR tnt hop up system?
Yes, this is type B. If you need to purchase, please send us a private message on Facebook, thank you!
facebook.com/TNT.studio.tw?mibextid=LQQJ4d
hey there, I purchased one of these barrels and hop-up, pre-made, came with hopup fitted on the barrelproblem is the hopup part with tnt on it does not slide into the original seat as your one hear shown does.I must say my one looks identical to yours except its all red colour, not silver in the middle like yours. Can you help me please. my local dealer is trying to help also
Hi there, first thank you for support T-N.T. product :) like you says - hop-up part with tnt on it does not slide into the original seat, that because the original seat is made by sub-lead material, after use for some time may be deformed...all of our HOP-UP chamber are in accordance with the original brand new size to manufacture. We suggest can lathe processing chamber or polished inside the seat. The silver in the middle one is new batch, thanks.
Hello, great video works in VFC - HK 416 GBBR?
Hello, you can take a picture of your original hop-up chamber and send us a private message on facebook, we will get back to you.🙂
facebook.com/TNT.studio.tw
Will this work with GHK M4? Evike customer service says it will.
Hello, we have full retrofit kit for GHK-M4 series, please refer the page : www.taiwangaote.com/9679-ar-series.html
Do you have to take the barrel out every time you need to adjust the hop up? and does it fir with the VFC SR16 E3 CQB?
Hello, about this retrofit kit we have two type HOP unit - Type A : spring type, Type B : adjust wheel. VFC-SR16E3 CQB is suitable this retrofit kit like normal VFC-M4, but need to cancel the guide-HOP function and replace to normal gas tube assembly, thank you.
@@TAIWANTNTSTUDIO so A or B? And how do I find a suitable gas tube?
Do you have to switch the gastube?
@@jeppethorsen9282 If the outer barrel have HOP adjust window than you can using Type B : adjust wheel, but if your handguard is inconvenient to disassemble all the time, we recommend Type A : spring type (use a 1.5mm Allen key to adjust the HOP from the upper receiver). Regarding general M4 gas tube components, I think it should be very easy to find on some airsoft websites.
@@jeppethorsen9282 If cancel the guide HOP function, the gas tube will shake and shake and shake all the time, it's very annoying... so we recommend to replace the normal gas tube assembly.
Hi there, is this one compatible with VFC BCM gbb? Can I still adjust the hop from the front while using this kit?
Hello, this kit is for VFC-M4 series, if want to fit this kit on VFC BCM GBB, you need cancelled the guide-hop function. Many of our customers still prefer to use this adjustment method on VFC MK18 and BCM.
@@TAIWANTNTSTUDIO Thank you for the reply! I wonder do you guys have a kit that will work with the guide system? If so can you provide a link or some key words?
@@samuelgao7210 Sorry now we do not offer the HOP chamber for VFC BCM, but if you want to keep the guide-hop function, maybe can consider just replace the bucking and inner barrel?
你好，請問這套件有改善VFC常要調HOP UP的問題嗎?
你好.基本上調整好就不需要一直調整..謝謝
可參閱官網:www.taiwangaote.com/store/c21/TNT__-CNC_Retrofit_Kit-__VFC_-_AR_Retrofit_Kit.html
謝謝，改天買個組裝~
Does this hop up unit take normal AEG barrels? or only the TNT ones?
Hello, our inner barrel is a universal platform, suitable for AEG or GBB, but if you want to replace the inner barrel with our HOP chamber, please choose GBB barrel, and make sure the HOP bucking length is 14.0mm, thank you.
So I can use my own inner barrel (unbridged gbb barrel) with the TNT bucking and hop unit?
@@terminating Yes, but still need to check the HOP window have enough space to suitable our HOP bucking :)
Is this kit compatible with the VFC VR16 SABER CARBINE GBB?
Hi there, of course this kit compatible for VFC - Gen.1 M4/416/VR16 GBB.
Please refer our official website page :
www.taiwangaote.com/retrofit-kit.html
Thank you :)
您好。這個組合方式是不是同樣適用ghk的套件
你好.GHK也可以使用這款調整環.請參閱官網.感謝
www.taiwangaote.com/store/p160/%E3%80%90T-N.T._HOP_Chamber_kit%E3%80%91Spring_type_adjustment.html
Compatible with mk16 urgi vfc ?
Hello,
The VFC MK16 URGI needs to be paired with our VFC-BCM MCMR upgrade kit, please refer to this website:
www.taiwangaote.com/9679-bcm-mcmr-gbbr.html
What degree of hop up rubber comes with this?
60 degrees. Thanks
請問有出滾輪式的vfc m4 hop嗎？
你好，我們有做滾輪調整，購買時請註明Vfc m5 B款調整即可，或是直接至我們的粉絲頁洽詢，請搜尋TNT studio,謝謝
www.taiwangaote.com/uploads/1/0/7/1/107110483/s313659443947887188_p141_i1_w2560.jpeg
Where can i buy it?
www.taiwangaote.com/
適用VFC 416 gne2嗎
你好，TNT目前已有新款CNC套件專門給VFC HK416A5 Gen.2使用的喔!!
若是使用內六角於膛座調整HOP的版本就是使用影片中的HOP座，若是新款由瓦斯導桿座調整HOP的就可以使用新款416A5的HOP座！歡迎參考我們的影片囉～
Hello Tnt airsoft please dont name a product vfc gbb kit if it does not fit the vfc hk417gbb.People like me who own a vfc hk417 and order the kit expect that it fits only to find out that it doesnt fit and are very unhappy because they wasted over 100euro and alot of time and energy.thanks
We are very sorry about that...but we have mentioned in the narrative the retrofit kit is for the VFC M4/416(Ver.1)/VR16 GBB series...and we have fixed the title of the video, thank you for leave a message :)
P.S. Now we are developing a retrofit kit for VFC HK417 GBB... ;)
@@TAIWANTNTSTUDIO Glad to hear that, so many 417 user waiting for that. But, let me ask you something. Im currently building vfc 416 gbbr, parts by parts. Im own zparts outer barrel, which TNT set is compatible with that?
Hi there, if you are building vfc 416 gbbr, even parts by parts, the main system still be VFC spec, so this set is compatible :) Welcome visit our official website to know more, thanks ;)
JACKIE CHAU Hi Jackie!) I own a VFC HK417 v2 bggr, is there a TNT hop-up chamber for upgrade my stock hop-up?
請問mk18 mod1適用嗎
您好，VFC MK18 GBB的話適用我們推出的VFC BCM MCMR的HOP座成套套組喔，如須購買請洽各經銷商或請私訊我們粉絲專頁：facebook.com/TNT.studio.tw 謝謝 :)
@@TAIWANTNTSTUDIO 請問這一組是槍膛調整嗎
@@lee666qx 您好，VFC MK18也是像BCM MCMR一樣在瓦斯導桿座快調式的調整方式，所以是沒有滾輪或彈簧的喔，謝謝
@@TAIWANTNTSTUDIO 所以改裝的話是不需要另外安裝彈簧跟滾輪式調整，直接安裝即可嗎😄
因為我需要改成m-lol護木，槍管固定環裝上後，瓦斯導管調整會無法安裝