【TAIWAN T-N.T. STUDIO】WEPSTAS Retrofit kit Assemble Introduction for WE SCAR/PDW/AK/SVD/THOMPSON GBB

【TAIWAN T-N.T. STUDIO】
WEPSTAS FULL HOP-UP RETROFIT KIT 韋普座升級套件
Suitable model :
WE PDW / SCAR-L / SCAR-H / THOMPSON / AK / SVD GBBR
產品特色：
●修正HOP座上彈位置。
●修正HOP座調整環易鬆動問題：調整環為CNC 鋁製品，涵蓋角度超過180度，尺寸精準，可緊扣本體，不因射擊震動而鬆脫。
●採無段式調整，可對應更多彈種(重)。
●內管採用左右機米螺絲固定方式，不轉動、不搖晃。
(建議安裝時螺絲沾一點螺絲膠並鎖至些微夾住內管的感覺即可，切勿用力鎖緊以免造成內管變形)
●標配T-N.T. 新款H.L.R. 膠皮及寬版下壓塊，套組搭配S+ 精密雙內徑日蝕氣墊內管，不只氣密優異而已，射擊表現更是如虎添翼！
成套套組內容：
●T-N.T. H.L.R. 膠皮 / GBB x1
●T-N.T. WEPSTAS HOP座 總成 x1
●定位下壓塊 5*6mm / 70度 x1
●Pin x1
●機米螺絲 x2
●精密雙內徑氣墊內管 x1
Features :
●Corrected the BBs loading position of the HOP chamber.
●Fix the the adjustment ring of the HOP chamber is easy to loosen : The hop chamber adjustment is CNC aluminum, covering an angle of more than 180 degrees, accurate size, can be tightly fastened to the body, and will not loosendue to vibration.
●Adopt stepless adjustment, which can correspond to more different BB weights.
●The inner barrel is fixed with left and right jimi screws, which do not rotate or shake.
(It is recommended to apply a little screw glue to the screws and lock them until the inner barrel feels slightly clamped. Do not tighten them too hard to avoid deformation of the inner barrel)
●Set included T-N.T. new H.L.R. bucking and wider HOP nub, using with S+ precision double inner diameter eclipse air- cushion inner barrel, not only excellent air-seal, shooting performance is even more better!!
Contents :
●T-N.T. / H.L.R. bucking / GBB x1
●T-N.T. / WEPSTAS HOP chamber assembly x1
●Positioning NUB 5*6mm/70°x1
●Pin x1
●Jimi screw x2
●T-N.T. / Precision Dual I/D Air-cushion inner barrel x1
官網頁面：
www.taiwangaote.com/9679-scar-...
----------------------------------------------------------------------------
【TAIWAN T-N.T. STUDIO】
●Official website:
www.taiwangaote.com/
●FaceBook :
/ tnt.studio.tw
●Instagram : _tnt_studio
/ _tnt_studio
○Purchasing methods :
if want to buy any product, or any questions, please pm to our FB ☺

[@user-qw6en3gf6f]

請問一下有想入手AUG套件組請問一下如配TNT高出素飛機出速能提升多少410跟510的哪一個出速能最大化最大畫出速能到多少?目標越高越好

[@TAIWANTNTSTUDIO]

初速大約提升10-15%左右
長度510會多一些，謝謝

[@user-gd7pv3lc8d]

我剛買了scar 韋普座 現在有一個狀況就是 槍機上膛後我退了彈夾BB彈就往後滑落出來，就算調到最緊也是會滑落，是往後滑落 變成第二次上膛變成上雙彈

[@TAIWANTNTSTUDIO]

你好.請問閣下的槍除了更換這個座之外.還有更換其他物品嗎?謝謝
閣下請至粉絲頁討論.感謝
facebook.com/TNT.studio.tw

[@user-wo4cu1ds7b]

請問是不是需要把hop皮側邊的定位凸點切掉才能安裝hop做？

[@TAIWANTNTSTUDIO]

您好，HOP座套組內自帶的膠皮皆已切掉側邊凸耳可直接安裝；如要自行更換其他GBB膠皮，建議可用指甲刀剪掉凸耳較為平整即可安裝，謝謝 :)