【TAIWAN T-N.T. STUDIO】WE M14 Retrofit kit Assemble Introduction

【TAIWAN T-N.T. STUDIO】2023年 全新產品
WE M14 GBBR專用 一體式CNC HOP-UP座總成/成套套組
製程結合開模、沖壓、CNC工程於一身的全新產品。
1. 本體採用鋁合金CNC精密製造，表面經噴砂及陽極處理。
即使在WE M14的強大後座力之下依然穩固牢靠，徹底擺脫傳統兩片式設計的螺絲易鬆脫問題。
2. HOP-UP調整輪設計有雙邊溝槽，使沖壓鋼片雙邊同時受力下拉，可提供平均的下壓力度，徹底擺脫傳統設計之左右受力不均問題；內嵌O環，止滑效果好，在WE M14的強大後座力之下依然穩固不滑動，有效維持調整完畢後的理想HOP-UP下壓量。
3. 沖壓鋼片下壓寬度位置皆經過模擬與精心計算最佳位置，搭配調整輪無段調整，方便進行HOP-UP細部微調，有效提升精準度與延伸飛行距離，讓這把經典的M14也能展現令人驚豔的射擊性能！
本產品提供有：單HOP-UP座套組 (含H.L.R.膠皮) 以及 成套套組 (膠皮、S+內管、HOP座) 可供選購。※建議彈重使用0.36以上
●安裝前注意事項：
原廠調整輪溝槽較窄，將調整輪溝槽比照原廠斜度加寬(需有DIY能力)
-
【TAIWAN T-N.T. STUDIO】2023 New release products
WE M14 GBBR one-piece CNC HOP-UP chamber set / complete set
It is a brand new product that combines mold opening, stamping and CNC engineering in one manufacturing process.
1. The main body is precision manufactured by aluminum alloy CNC, and the surface is sandblasted and anodized.
Even under the strong recoil of the WE M14, it is still stable and reliable, completely getting rid of the issues that the screws of the traditional two-piece design are easy to loosen.
2. The HOP-UP adjustment wheel is designed with bilateral grooves, so that both sides of the stamped steel sheet can be pulled down at the same time, which can provide an average downforce and completely get rid of the issues of uneven force of the traditional design; the embedded O-ring prevents slipping the effect is good, even under the strong recoil of the M14, it still effectively maintains the ideal level of HOP-UP after adjustment.
3. The position of the pressing width of the stamped steel sheet has been simulated and carefully calculated for the best position. It is matched with the adjustment wheel for stepless adjustment, which is convenient for fine-tuning the HOP-UP, effectively improving the accuracy and extending the BB flight distance. This classic M14 also can show amazing shooting performance!!
This product provides : HOP-UP chamber set (including H.L.R. bucking) and complete set (H.L.R. bucking, S+ inner barrel, HOP chamber) are available for purchase.※It is recommended to use above 0.36bb.
●Precautions before installation:
The groove of the original adjustment wheel is relatively narrow,
and the groove of the adjustment wheel is widened compared with the original slope.(Recommended to have DIY ability.)

[@SenzoroImpu]

Did it necessary to disassemble reciever for adjust hop up on WE M14 EBR like original?

[@TAIWANTNTSTUDIO]

Yes, need to disassemble upper to adjust HOP-UP.

[@noadasseen6016]

Hallo i have a Problem with your parts for the snow wolf kar98k. For some reason the hop up wont work the Part of the rifle doesnt push the hop up nub down to increase the hop. Can you please help me?

[@TAIWANTNTSTUDIO]

Please private message us on our facebook fan page and send us a photo of your question, thanks😄 : facebook.com/TNT.studio.tw

[@WEICHYU]

很納悶 we 對於 m14 的 問題 都沒 改善

[@Jon.151]

請問是不是一定要配合tnt的內管和hop up膠?

[@TAIWANTNTSTUDIO]

您好，常規GBB規格膠皮與內管都可以使用在本HOP座上，謝謝

[@nextgenretros2062]

Is it possible to use this with the stock barrel?

[@TAIWANTNTSTUDIO]

Hello, is not available, thank you🙂

[@nextgenretros2062]

@@TAIWANTNTSTUDIO Hello, my question is, is the hopup unit compatible with vsr type barrels? Thank you

[@TAIWANTNTSTUDIO]

@@nextgenretros2062 Hello, there must be a locking point on the side of the inner barrel, and the locking point that fixes the inner barrel is 23.75mm from the front end.

[@aiixoli]

請問何時會上市啊?

[@TAIWANTNTSTUDIO]

已開放訂購囉～煩請私訊至我們的粉絲頁洽詢，謝謝 :D

[@TAIWANTNTSTUDIO]

產品已上架囉！謝謝

[@user-gt8bv5zi9g]

這組要多少呢

[@TAIWANTNTSTUDIO]

您好，根據不同內管長度有不同價格，詳情歡迎私訊我們粉絲專頁喔，謝謝 ！facebook.com/TNT.studio.tw