Get your gbb to shoot 80M | VFC M110K1 | The Better
Vložit
- čas přidán 13. 07. 2024
- #vfcm110k1gbb #m110k1 #4UADthebetter
If you like these videos, using【🤍Super Thanks】help and support more creations
如果喜歡這類的影片，請大大的用【🤍超級感謝】支持我們繼續創作👍🏻👍🏻
Click here for subscribing our awesome stuff► / @4uadsmartairsoft
Go check out our new arrival【4UAD最新商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
For each of the test, here are the short cuts!
0:00 Intro/ 開場
1:14 M110K1 Problems / M110K1 災情
2:18 Solve Hammer light strike / 解決火控輕敲擊
4:37 M110K1 Buffer Tube Came off / M110K1尾托桿鬆脫
6:44 How to increase Hop up / 如何提升上旋效應
9:59 Misaligned rail / 魚骨歪斜
11:48 Rhino Airsoft Field / 寶島犀牛戰場
12:36 The Range Challenge / 射程挑戰
17:27 Overall Feedback & Conclusion /本槍回饋&測試心得
If You Don't Wanna Miss Any important informations, Follow Us On :
Facebook ► / 4uadsmartairsoft
Instagram ► / 4uadsmartairsoft
Airsoft Service Center ► 4uadsmartairsoft.com - Zábava
👇Sponsor & Any Good Stuff👇
👇影片裡的好東西在下方連結👇
Go check out 4UAD new arrival & lubricant pen
【4UAD 相關商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
Special Thanks:
➤ 犀牛戰場: 這個場地真的誇張好玩!!! This Field is crazy fun!!!
🛒Goods : facebook.com/profile.php?id=100095398034153
➤ACETECH: you guys do make some amazing tracers and chrono
🛒Goods : www.acetk.com/
🛒 Amazon Goods : amzn.to/3sr5I2n
➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!!
🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
謝謝4UAD 新系列的影片~ 有你們 優質的airsoft 真的很棒~!
希望這系列影片能夠幫助到大家！
It may be a nuisance when you get a GBB that suffers from being built by bad choices, but when you work on it and make it a top performer, it feels so good😍
I know and it really make me feel great after seeing it work like a charm
This was amazing! Thank you guys, this video was so informative and it definitely gives some peace in me wanting to buy my first GBBR.
Also, I've been following you guys since almost the beginning of this channel and I just wanted to say, THANK YOU! This channel is everything I want from a information stand point and the quality of the content is insane! I never thought a channel like this could exist but here we are! Thanks again for all your hard work and giving us the most quality content!
Hey Marlonm You have no idea how much this means to me and the team! And we are so glad that this channel is helping out the Airsoft community in someways! Thank for for the support for all these times, it's a tough road, but I promise you we will keep on making great videos. Best wishes :D
Seriously, one of the nicest and more tensed bb flights I’ve ever seen
😳 congrats dude amazing job
Stay tuned for our hop up bucking
這集很精采呢，謝謝你們花這麼多時間和精力，來拍攝製作這些內容豐富的影片!!
沒問題的！ 希望大家喜歡～拍影片是很開心的一件事，我們也想繼續跟大家分享我們的經驗
awesome video as always! you are easily one of my favorite if not the favorite airsoft tech channel out there. always exactly what I want to see/know. thank you and keep up the awesome work!
Haha thanks man glad you like it! I will keep more coming!
希望VFC有看到這支影片，你們家的東西真的非常......適合訓練每個買你們產品的玩家，變成小賴這麼會打磨跟拆螺絲。
他們進步真的蠻多的了～更何況這是早期版
Love your channel mate. Vibe is perfect along with those ASMR-like builds and info videos.
Regards from Sweden.
Thanks for the love man! We will keep the stuff coming!
Definitely love this series , I would love to see more advanced tips and tricks for teching since most of the videos are about entry level tech tips.
Sure will put that to the notes
每一期都能学到新知识 thx bro
Anytime! 很高興能幫上忙
Wonderful insight on the 110. Now i am so tempted to put it into my christmas list...lol. may dropby 2 see u guys one of these days. Keep the good work up. Cheers
hahah sure come to MOA 2023 on Dec1-3 would love to hang a bit and we got you some free buckings!
Awesome stuff!!
Nice to have a bit of scientific explanation for the reasons behind an upgrade
Too many people throw Gucci components into their replica without really understanding the cause & affect and actually end up making things worse 👍
That is some nice suggestions man, I will keep that in mind for sure! Really interesting way to approach the expensive area haha
I missed a bunch of vids since I was in Taiwan but I came back to a banger! Nice video!
The next time you visit shoot me an message! XDDD
@@4UADSmartAirsoft For sure! Really wanted to this time already but I was too busy with family TwT
Hi! I just ordered a similar gun (with fixed stock) from Taiwan. You gave a lot of good ideas for tuning, thanks for that. I will also replace the NPAS valve with an adjustable one. 2J is allowed for DMR in my country. I hope I can hit the 80 meters too.
很有用的教學
很高興有幫上忙
thank alot bro.
I need save it video for my m110
Anytime buddy!
The bolt lock not working after changing the Buffer tube. There is a better solution. The buffertube on the SR25 is a Realsteal milspec Ar10/M16A2 buffertube,wich is 2cm longer, because of the longer Bolt (AR10). So if you want to change the buffer use an Ar10 / or m16A2 buffertube, so you dont need to cut the buffer
Dude! Straight to the point! Nice one! How come I didn’t thought of that haha! Thanks man! That is some nice Info to share!
You guys never fail to deliver, great job.
Also, very interesting technique with the paper towel + superglue, I may try that out eventually.
I like using harder material for the nub but the metal arm itself (which acts as the nub) is just too hard IMO, It needs a hopup system with virtually no play to work well which is something unfeasible with GBBRs, especially considering VFC's Guide Hop has waay too much play ootb (at least on the BCM, I don't own an MK110).
I have a similar way to address this, I carve a cylindrical shape on the hop arm and use a DIY polymer nub, works wonders.
In the video it seems you are using Tokyo Marui's stock MWS bucking, is that right ?
It’s a prototype from us haha stay tuned xD
You guys never fail to amaze me! I love watching this kind of airsoft tech content and you're the best in that category. For future content maybe you can consider doing some hi capa improvements too. That would be lovely
Will put that to the list! Thank you big time!
@@4UADSmartAirsoft and oh I would love to see the "tissue super glue" hack there. 😉
Very very nice content. People thought thight barrel while you mod just only with tissue and super glue for super hop up. I agree, nub is the most important than barrel
Totally agree man, nub and bucking is the single most important item for airsoft gun when it comes to range and accuracy.
很棒
哇喔喔喔喔大感謝～～～～～我們繼續努力
I’m quite surprised to see so many QC issues within an expensive VFC. Considering how they are improving in the GBBR world, hopefully they deal with this problem.
Yah the problems are solved by Vfc already, since this one was the old one laying around, and they made some big improvements already
They have new updated version this coming february. They fix all issue from their DMR segment
1:32 got me good 😂 my barrel on my mk18 came loose the other day and until I fixed it I was thinking this exact same thing 😂
Hahahaha I know right
please, if possible, make videos of the electrical replicas - aeg, thanks in advance. Great video by the way.🇧🇷
Will do man!
That is interesting to see how it's basically falling apart. I picked up the 1st Gen you could say, SR25 and the only issue I had was the barrel being low quality at first. After about a year of off and on use, the bolt started to break with the fake gas key and they had a tab on the bottom to help with the hammer resetting to not wear down the bolt. That tends spring literally fell apart and jammed my rifle into full auto till I was able to Jerry rig a AEG reversal latch gear in it I picked up a new bolt and seen they removed it all together now though.
Damn if that happens to me I would be pissed lol hope you got it fixed I heard it cost a fortune to fix one of those
@@4UADSmartAirsoft I got a new bolt really cheap off Hop Up. Usually it's between 110-130. USD. I got one for 80 USD
Great stuff as usual! How do u minimize the loosing hopup issue due to the heavy recoil on this gun?
Usually it happens when the o ring is too loose, I would replace it to another one so it creates a tighter fit
I’ve been always TM MWS believer.
But now you made me wanna try VFC M733……
Will need to do some fun tuning, but when it’s tuned its a beast
我的天，那個射擊場地好棒！
來豐原玩一下啊
哪家的付費場地呢？
優質影片就是要Super Thank支持的啦!!!
請大家多跟這位大大學習哈哈哈～～～～感謝支持
熱風槍真的是必備工具 原廠的super glue有夠屌
原廠膠水真的很兇悍
After seeing this, im just gratefull my ghk AK just having some short receiver, wide receiver, and 0.2mm too high hop up retainer that chewed the hop up bucking
At least i can adjust the zenitco rail by adding some 2mm spacers
File the base of the hop up retainer
And fix the wide receiver with wood clamp
Oh man Ghk aks do have quite some problems as well.
Hi, I Also use DMR and I would like to know the jules you were shooting
2.8j
i miss chrono but rly nice video!!
Haha 0.45g and 2.8j
真的太猛了，完整解放m110的實力
問題是一般人不可能切短buffer跟槍機鑽洞減重吧
鑽下去幾千塊，歪了就是再來一次，我就算辦得到也太不敢動
哈哈哈我那個時候其實也蠻怕的，鑽洞完全不需要只輕了45克 buffer 換Ghk然後把緩衝拔掉即可
I had that problem but it was the firing pin spring that had become deformed. The allen screw that holds the assembly down would back off and cause the assembly to lift and deform the spring. I replaced the spring and used locktite on the allen screw and never had the problem again.
Poor decisions when it comes to production
Gbb界黑傑克是你！😊
沒啦土炮土炮
Love this channel. If possible, please review the Umarex HK M110A1 AEG. Heard its good and bad, would love to see your opinion.
Thanks for the love buddy and will see if Vfc wants us to do that one
今年企劃很多欸 有油筆的影片 又有跟觀眾承諾的升級系列
一定要承諾的啊～我今天來杯大杯珍奶～～感謝5.56每次的支持
Negev 是我最喜愛的機槍❤!
Are they going to release new version of this Gun on february? They had announcement that they will remove the valve knocker and change the hammer to version 3. Thats awesome to hear. Any thoughts on this?
Awesome! Could you do the VFC SCW9/APC9 too?
Will put it to my super long list
so oddly enough my M110K1 does the opposite for some dumb reason it was over hopping with .40s, not sure what it's causing it but I assume it's the bucking or possibly the hopup adjustment, either way this video is very helpful in helping me take apart my m110 and putting it back together, thanks guys
Anytime man! Glad we helped in someways
Great video…. I wish I had 1% of your skills. :)
Haha you got it for sure
Very good DMR, please review airsoft spring sir 😅
Haha will do
Any recommendations on hop-ups for VFC Avalons, or is it better to just leave it stock? I've used the Maxx Hop-up on my AEG VFC Saber but notice misfeeding ever since I started using it
It’s the dimensions that Maxxhop didn’t do well…. I had the same issue on my Ics. For this case you will need to mod your feeding nozzle length and for hop up bucking you can wait for our 4uad hop up bucking
Would be actually nice if the issues were non-existent ootb. Hoping the ones you shown here are fixed in the newer releases. Great vid!
Thanks man I’m pretty sure they got the problem fixed already
Had the same problem with the buffertube. I screwed in a RS Mil-Spec tube and it work as should now. I'm testing different buckings now: W-Hold 70 deg. shot reasonably straight. Have the Modify X-range in there now, but that seems worse. Now the MR hop 70 deg, and Flamingo are left. What did you guys use?
That is some nice I got to share too! Thanks man!
Greetings from Korea. I have a VFC M110 and am trying to make it a gaming machine using HPA. What hop-up rubber and inner barrel did you use? Currently equipped with Mapleleaf's 6.01 510mm and Mapleleaf 70 degree hopup rubber.
For the bucking its actually the bucking we are working on and the barrel is just stock barrel, stay tuned you will see it very soon
One important information which I was missing is what bb weigth were you using and what power output did the m110 had at the time of testing :)
I was shooting 0.45g bbs and 2.8j
Great video, I've probably missed my chance to ask...but what weight and make BBs did you use?
Apologies if you said and i missed it
No worries man I was using 0.45g bbs
@@4UADSmartAirsoft Thank 6ou very much for the information and more importantly, your time 👍👍👍
Nice video guys !! Just 2 questions. What weight was the bb and how many joules was the replica, it help me to understand better 😊
Haha sure it was using 0.45g bbs and 2.8joule
@@4UADSmartAirsoft ❤️
The bucking used in this video, were you doing R&D for the Quantum bucking and were using a prototype?
hahaha yeah you got that right
Superglue and tissue paper you say? I'm gonna have to try that. Is that any kind of tissue paper? And what do you do if you need a thicker patch? Glue one layer on top of the other or do you fold the paper?
It’s the kind of tissue we use to wipe our ass or clean our jizz lol and usually I just roll it to a ball and sand it into shape.
In the end I also bought the K1 version from Taiwan. It arrived last week. Unfortunately, the errors in the video were not corrected by VFC. The flat thread of the buffer tube was coated with some kind of adhesive, that's all they "innovated". I replaced it with an original AR10 buffer tube before it broke. It was quite difficult to unroll because of the glue. For the hopup, I glued a piece of an old hopup rubber to contact point of the arm, so it still spins the 0.45 BB properly. I also replaced the valve in the nozzle with an adjustable one (NPAS), I had one at home for a 416 and the two are the same.
if you bought it from a store it might still be the old version, now you can use this video to fix it up lol. But yah I feel sorry that you have to go through all that.
GBBRs usually are pretty bad unfortunally, especially in cold weathers, but are so freaking bad ass.
Yah man I totally agree when it’s cold gbb just dies
請問HOP皮是用哪一種的，彈道表現滿漂亮的
嘿嘿嘿開發中
Sorry but all this getting me tired of airsoft, why the replicas are never 100 percent finished... Only TokyoMarui is able to deliver replica that works and for long
Haha it was whole lot of fun for me, but yah that might be the reason why Tokyo Marui is Tokyo Marui haha
Marui might be the best quality m4 gbb oob. But I agree with Andrew, it is more fun. When you succeed to perform modification, and surpasses mws, like that vfc, you will have more satisfying feeling. I dont like mws trigger feeling. So toy.
Its just vfc, u know,
It's always better and fun to built it to your playstyle and needs.
There’s much more companies that are good and last a while than just Tokyo Marui.
I just got the vfc psg1, any way to increase range/accuracy? Im really lost in the gbb upgrade universe
Very impressive video!!!
I wondering BB weight and FPS when you try 80m shot.
Normally in S Korea, DMR use 0.3BBs, under 400FPS. Use NPAS very tightly and accuracy is suck. Very sensitive hopup.
Haha this one uses 0.45g and 2.8j output, it was a hot shooting gun and too hot for games
@@4UADSmartAirsoft so the muzzle velocity is about 111m/sec?
Great work. Whats the power on the GBB?
2.8j with 0.45g and thanks for the like
Would love to know what weight and what joules you are using
0.45g bbs and 2.8j
我相信很多的玩家都沒有這樣手工DIY改槍的能力，槍有問題都只會丟給店家去修，更何況VFC的產品款式那麼多樣每款都有不同的小問題，還得必須一直反覆測試才有辦法找到絕決問題的辦法，看完都搞不清楚這是推坑影片還是勸退影片了，還有就是貓咪好可愛
即使是店家也不一定敢這樣處理 通常都建議替換零件 不換的話就是無法處理
哈哈哈這個是我們的解決方案，放在這邊給大家參考用～～不用完全買單
希望有hk417 的優化影片🥺 我好需要
那得好好研究一下417了
Hey iam not sure if ive missed it, but what gas you using, what joule/fps and which bbs are you using during the 80m test?
0.45g 2.8j and 12kg gas
@@4UADSmartAirsoft nice bro, is it field legal? Here in Germany we mostly have outdoor 1.6 joules with assault rifles, around 2 joules with dmrs and 2,5joules with snipers
Dmrs and snipers have minimum engagement of 20-25meters
I want to know the weight and speed of the BB bullet used in the 80m shooting.
0.45g bbs and it was shooting 2.8j
I have a little problem with my brand new replica. I have written the changes below. After the first 5-6 shoots the fps falls to zero, the BB left in the chamber. Have you any idea what is wrong? Maybe the adjustable NPAS valve is not working properly?
I think this happpened due to the lose hop up I think you can pressdown the hop up a little more and see if it solves the problem
@@4UADSmartAirsoft The Hop Up bucking was not proper. I used Maple leaf Super 70, that is a bit shorter and tighter than the original VFC. Replaced Unicorn 80. Works fine with that.
Did I miss? What was the weight of BBs at the shooting practice?
0.45g and 2.8 j
真心希望vfc趕快出urx4 mlok護木版本的sr25
你看 sr16都出mlok多久了xd~
哈哈哈敲敲敲
請問測試時用多少gram bb?另外大約多少動能？
0.45g 2.8j
What did it chrono and what bb weight did you use for this test?
Yes, please
0.45g and 2.8j
80m is getting pretty impressive on a Gbbr DMR
What’s the power output and BB weight you used to shoot ?
2.8J with 0.45g
which weight bbs you test? thanks.
0.45g
I've heard that swiss cheesing the bolt carrier like you did could potentially lead to issues down the road, especially since GBBRs rely on the momentum of the bolt to properly cycle, cock the hammer, reset the trigger etc. Have you experienced such problems, apart from the ones you depicted in this video ? Nice one btw 👍🏻
Haha sure and thanks for the feedback, actually the Swiss cheese only cut off 45g of the weight it didn’t do much to be honest, and for my Ghk when I switched to this super light 7075 bolt it did mess up the timing a little in which I have to change to a stronger recoil spring in order to keep the full auto stable.
@@4UADSmartAirsoft How was the full auto less stable ? A light bolt carrier and weaker spring would be good for winter play but I don't know if that's actually a concern in Taiwan😅
@@4UADSmartAirsoftI’m thinking of doing the Swiss cheese to a kwa 308 maten (larrrrge bolt) anything I should look out for? I’m very techy so lay it on me
Please ship to Hungary
did VFC fix all these issues? was thinking about getting one.
i assume you gave them the feedback seeing how close to the VFC pentagon y’all are
Yep they got it all fixed!
@@4UADSmartAirsoft that’s great to hear! might pick it up when i visit there again for MOA
can you guys do a video on the scar h from vfc
Ohhh I want to do that one pretty bad!
@@4UADSmartAirsoft yeah we need someone with youre skills to make it really reliable
請問這把槍建議收二手全新的嗎? 我怕收到還沒修好問題的版本，建議直接買新的嗎?
收二手真的就要做好大修特修的準備，基本就是抽籤抽獎喔
Pdi w hold bucking is the best
Will see about that haha
@@4UADSmartAirsoft more consistent hop and range
把hop皮上的凸耳剪掉不會讓Hop皮在Hop座裡面亂跑嗎？
其實勾在槍管上就不會囉
is angry gun's ar15 buffer tube is enough thread for this gun? i just bought m110k1 right now lmao
Haha I don’t know to be honest since I never tried it
How much is fps on it and which ammo weight did you use?
2.8j 0.45g bbs
看完之後超想把我的SR25交給你們幫忙拯救那貧弱的射程與左右飄移的飛向XD
哈哈哈還是很有救得~加油等我們的皮
兄啊 你這把槍射出來的是雪罷(惱
哈哈哈哈
我發現一件很神奇的事情Xd，我的ghk urgi鍛造版在拖桿受力的時候拉槍機會卡住或超級卡（受力方向要跟槍機不平行，所以平常抵肩不會發現XD）
咦這有點奇怪喔或是你要不要檢查一下後定裡面的小磁鐵有沒有碎掉，那個要是碎掉有時候會把槍機頂偏心造成阻力
彈重和出速？
0.45g 2.5j
@@4UADSmartAirsoft 🤣🤣🤣
can i use hair dryer instead?
Lolol I have an effective range of 100cm
what gas was used? what was bb weight?
12kg gas and 0.45gbbs
請問狙擊鏡的型號規格是?~謝謝
Vector optics 2x10 forester
下壓點不足，可以換TNT組裝總成？？
M110k1可以裝？
Why is swiss cheesing the bolt in video about increasing range? Also wouldn't that cause problems with the bolt's structural integrity?
Swiss cheesing has nothing to do with range, it’s just something I wanted to do
@@4UADSmartAirsoft fair enough
看了都心累了，要修這麼多地方......話說為何槍機要鑽成那樣??輕量化?
那個別鑽了～我單純手賤效能也沒差哈哈哈
What bb weight are using?
0.45g
@@4UADSmartAirsoft thank you.
@4UADSmartAirsoft and what was the joules?
1st!!!!yehuuuu!!!!
Hey yah!
Get you a viper tech
Damn~~~~
How much Joules per shot was that replica shooting ?
Depends on bb weight. With .20 about 1.5J, with .43 I got 2.4J
黑阿就那幾種
想看GHK urgi
好槍一把
Kindly,.. what is the FPS of the Equipment
0.45g bbs and 2.8j
@@4UADSmartAirsoft Tnaks👍
請問安裝在槍管上的是什麼東西？？
Hop 皮嗎？ 嘿嘿
@@4UADSmartAirsoft 安裝在瞄準鏡前端是什麼東西？
@@YIUYIUCHU173run cam之類的 彈道攝影機
最近本來有想收一支M110的…現在看來還是不要好了…
XDDD
It use 0.2 bb?
Nope it use 0.45g