Video není dostupné.
Omlouváme se.
Is VFC M249 SAW GBB Worth Buying? | VFC M249 SAWGBB 值不值得買? | The Honest
Vložit
- čas přidán 14. 08. 2024
- #vfcm249gbb #m249 #4UADthehonest
If you like these videos, using【🤍Super Thanks】help and support more creations
如果喜歡這類的影片，請大大的用【🤍超級感謝】支持我們繼續創作👍🏻👍🏻
Click here for subscribing our awesome stuff► / @4uadsmartairsoft
Go check out our new arrival【4UAD最新商品在下方連結↓↓↓】
🛒🛒 store.4uadsmar... 🛒🛒
For each of the test, here are the short cuts!
0:00 Intro/ 開場
1:01 The externals / 外觀
2:55 3 Must do & Not do / 三件必做,三件絕對不能做的事
4:06 The Mags /彈匣
4:23 High pressure Safety Feature / 高壓安全設計
5:02 Hop up system/hop up 系統
5:49 That the gun apart / 大部分解
7:18 Target Range /射擊測試
9:59 Balloon popping / 掃射氣球
10:30 Acetech Tracer / 發光器
10:55 Overall Feedback & Conclusion /本槍回饋&測試心得
14:20 B Rolls /有趣畫面
If You Don't Wanna Miss Any important informations, Follow Us On :
Facebook ► / 4uadsmartairsoft
Instagram ► / 4uadsmartairsoft
Airsoft Service Center ► 4uadsmartairso...
👇Sponsor & Any Good Stuff👇
👇影片裡的好東西在下方連結👇
Go check out 4UAD new arrival & lubricant pen
【4UAD 相關商品在下方連結↓↓↓】
🛒🛒 store.4uadsmartairsoft.com/ 🛒🛒
Special Thanks:
➤ VFC Airosft: They got a whole lot of trademarked guns
🛒Goods : www.vegaforce.com/site/index?lang=zh
➤ 普拉絲水彈運動場: 感謝貴場贊助拍攝地點,想烤肉玩水彈務必找他們!
🛒Goods : facebook.com/profile.php?id=100063918788979
➤ACETECH: you guys do make some amazing tracers and chrono
🛒Goods : www.acetk.com/
🛒 Amazon Goods : amzn.to/3sr5I2n
➤PUFF DINO (恐龍瓦斯): Thanks for supporting us the gas, Puff Dino is the way to Go!!!
🛒Goods : www.puffdino.com/en/category/Airsoft-Gas/E01.html
you should roast VFC and their terrible lube and greasing while promoting Four-wad products
Does it accept gbb inner barrels or AEG barrels? Also is there anyway to improve gas efficiency?
@@liammchugh9175 yep it takes GBB Barrels and buckings and HPA is the way to go!
Don’t forget that vfc has also come out with an hpa tapped mag for this as well. but great review I think this answered a lot of questions people had about it and put it in a bit of a better light. Great channel keep up the good work
@@LtChris909 I think a lot of the accessories have yet to be released I’ve been looking for the nutsack mag and the collapsing stock
Big balls from vfc designing and releasing something completely new like this.
yah, I'd say they did a good job for the pre production sample, lets hope the first batch is just as good!
10:19 THAT is a joyful man right there
I’m happy haha
Nice, I hope one day it will be available in Europe, especially in Poland at some point ;)
lol yah hope they release it and ship globally! good luck best wishes!
I believe it will be distributed by Umarex eventually
Really looks cool. The possibility of breaking the loading nozzle if you forget to rack the handle first is a bit concerning. How easy is it to break? If it requires force to insert that would be fine since it would just remind you to rack the bolt. But if it is easily broken that's going to be a big issue with fielding since under pressure one can easily forget to do that first.
Well the loading nozzle is not that fragile, but still avoid to close the hatch when the mag is in
Love me some VFC, even though I prefer AEG myself
I was skeptical because it costs 1000 euros here. But bought it amyway. Lots of potential and its a wonderful collectable.
damn...........that is quite a bit of money.... hope nothing goes wrong with it! Good luck!
Pretty spectacular velocity with .40grams
Beauful video as expected. But please next time add a deeper explanation about the fire group system.
Unfortunately I predict many people will whining about damages because just a few read the manual.
Sure man! Thanks for the suggestion, we will try our best
Could you guys do a 4uad review of the h8r revolver ? :)
Have you got a 4uad test video on the way for this one? i would love to see the difference in performance between the 3 power sources.
I'm thinking the HPA system is probably the way to go for cost efficiency and performance
Yah HPA is the way to go for sure, and for this one we might not run it through our GS since we are short handed at the moment
@@4UADSmartAirsoft could you do a quick one on the 3 different power sources? Show us gas efficiency and performance between the 3
Underrated channel
Thanks man!
The idea of an LMG GBB looks great and I'm a fan of VFC ( I love my M110K1) but I think they could do a way better job with the magazine. All the interesting functioning, etc of the gun goes by the window when you have to use that kind of magazine to put the bbs, etc. Designing a magazine that could hold gas and bbs at the same time is not that dificult and there are tons of solutions that could bring a way more interesting feeling to the user than a magazine for gas and the P90 shape magazine...
Lets hope for the update haha
Sir could u show me one of ur solutions please?
@@bowenfan4489 I could but, as an engineer, business pay me for solutions.
To put it simple, they already had a system that could work with a small tweak.
THX for making me HOOOOOOOOOOT 😍
Anytime man! and thanks for coming!
Airsoft Alfonso watching this smashing the preorder button
lololol sooo true!
希望vfc會再接再厲 mk46, mk48, m60, m240
敲碗～～～
I wonder how many shots u get out of 1 gas fill stanag gas mag
150 lol
RATECH WE M14 Level 3, is it worth it?
彈鍊塞不進彈鼓覺得困擾
I had am m60 and lost it. The box mag was always going down. Mgs suck in airsoft just get an m4 v2
Laughs in 30 rps 1.5j PKM with 8k Bullgear insert that feeds 120% of the time
影片超棒的，但是有點擔心攝影師的安全，為了要拍出優質的影片，有些舉動在生存遊戲裡算是禁忌，像是從射手的槍口下走過去，雖然看起來是有戴護目鏡，但是還是要記得把安全放第一位👍
真的，只能說辛苦攝影師了⋯⋯我能做的也是特別小心不要掃到他
Honestly. Yes. Yes it is. Is it worth Fielding? Probably not yet.
If this could shoot above 60m... maybe it will be good for being squad LMG in my country xD (LMG J limit ~ 1,9/2,3
Umarex H&K MG36 GBB with beta c magazine when?
Great review.
Glad you enjoyed it! Thanks man!
I have some real issues with the Magazine well it came broken and I’m really disappointed in this product from VFC. It really has poor quality control and the cheap materials they use doesn’t justify the price of £800. The magazine well to eject magazine using the lever just snapped inside and now it’s just loose and floppy. This is a real issue that you should also mention. Btw I do love your videos just in this case a negative feedback on the product keep up the good work!
Now is time for TM to make it skirmishable and robust where it should be.
TM development team hitting the pre order bottom
I mean, every single VFC gas product has been made in the last 5 ish years has been more then usable in airsoft games
Ehhhh, the TM SAW also has weak points.
@@sogerc1 too many of them... sadly enough
今天搞到了 一个字 值 两个字 很值 三个字太值了
好玩小物啊
Great video! Would a review of the WE m14 be something you'd consider some point in the future?
Sure that one is a one I want to test
Hi ! thx for this video !
i just bought this toy :)
can u explain me how did you do for instal the tracer ? the "Flash Hider" can be dissociated from the "Barrel" ? or you instal an adapater for the predator mkII ? =X
i didn't found the answer at this question 😢
If it is strangely hard to remove it means it’s got locktie to the thread, you might need a heat gun set to 100degree Celsius tans blow the flash hider, remove it with a glove, don’t burn yourself
@@4UADSmartAirsoft THX SO MUUUUCH U save my life i think :')
日後會唔有推出強化組件，例如精密管連hop up膠皮組裝？？
有機會喔!
@@4UADSmartAirsoft 最好可以再改善氣化同氣密
看完更坚定了预定的想法了，非常好视频
感謝阿~買下去了!
if I want like thes
Thank god I'm not into the support role otherwise I'd have to buy this.
lol very true!
請問1:19的feed tray 是只要卸下那個1mm左右得六角螺絲即可將feed tray向上扳動嗎? 請問這螺絲原廠有上螺絲膠嗎? 感謝
有上一點喔
nice video!
Thank you! Cheers!
Rule nr 103: Please never touch this gun, and NEVER feed after midnight!
Lololol
No 4Quad system review for this one? Personally love the thing, and understand the safety issue and the gas limitations... but by your video seems like it wasn't able to shoot 2 100bbs magazines on one charge, and that's... a little dissapointing?
Yah we are a little short handed at the moment, won’t be able to run it with our gs and I would recommend go HPA on this one
It's going to be a 1000€ here no doubt
damn......that sucks
謝謝！
買飲料囉~~謝謝阿~~~~
@@4UADSmartAirsoft 看到花絮那邊笑得很開心xd
My country has max joule rules of 1.2. Is the output adjustable?
Nope but you can shorten the barrel
Где можно такой купить и чтобы отправили в Россию?
請問，若槍機在後想拆槍托，直接按扳機釋放槍機會怎麼樣嗎?
槍機會插在臉上
How many rounds do you get out of one gas filled box magazine?
Around 220 if you mag dump it
I thought it was going to be a co2 system.
I think they are working on it
I hope a gab pkm comes out😮
Fingers crossed
3:55 我有聽錯嗎?《不能操的機槍》
4:45 這在aw彈鼓上也有相同的設計，但我會將洩壓閥堵死，不然它會莫名漏氣
：D
人家4玩具嘛!
how many rounds can the large box magazine able to handle in summer?(no recoil drop, cool down .etc)
if you do it mag dump style it can only do 1 mag and the gas container will cool down. Since the container is large, and the gas pressure becomes lower, and when you export the gas the cool down will even lower the pressure. I would say, if you want to do mag dump you got to go HPA. And as we test it with HPA......its a beast :D
@@4UADSmartAirsoft hopefully vfc will release the co2 & hpa magazine box sooner 👀 any words on they have plans on these ? Thanks for the reply! Can’t wait to see the short movie you are in !
@@joe442 hahaha thanks man, I think they will do it fairly soon, if you already have a HPA tank, this one works great with HPA ;D
@@4UADSmartAirsoft probably I will wait for vfc make a magazine box shaped hpa tank so I can even use it in winter in Canada 😏and mag dump none stop
聽說好像後來的版本有到20RPS?
喔喔如此猛烈？！我聽說他們量產前做了不少調整
Can you guys check, if the gun runs with 134 or 144a gas without problems?
pressure is the key, 134 works with heat packs as long as you can keep the pressure high the gun will cycle fine! :D hope this helps
@@4UADSmartAirsoft Thank you! Will you do also the grading system challenge with the m249?
在台灣只要一報上新聞 生存遊戲的店家就很痛苦.....唉~ 為此感到悲哀🥲
我們來挑戰變成正向新聞
do you think that this gun will withstand HPA, if you would connect it to HPA, the system is already there :D
Yes we just tested and it works
@@4UADSmartAirsoft Nice.... any vids on that???
Great! Thank you for this wonderful video.
From now on I am your fan.
From Korea.
Thanks man! Thanks for the support and love! We will keep the contents coming!
is it possible to transform it into HPA and make an adapter in 3D printing?
From what I have seen from shotshow about this gun there are going to be gas CO2 and HPA options to power it
@@DavidBall717 very good news, do you think they will make an adapter for a bb ammobox? because 100 bbs for such a machine is sad
@@Baroudeur212it's realistic actually which is what GBBR's tends to aim for
身為一個喜歡侏儸紀公園電影的人而言,我覺得我受到了冒犯
好啦影片其實超棒的
哈哈哈本來想說用個梗~本來期待很好結果很慘XD
did you know if we can change the power of the 249 ? in france machine guns are limited in 1 joule 😢
I think this has a "npas" valve that you can adjust for more or less power. If you not you can always buy one and self install. It's pretty simple.
damn this seems like a common problem, for this case I would recommend shorten the barrel length. I think it will be A OKAY
the sad truth is this one is not npas
@@4UADSmartAirsoft ah, ty for the info!! I love your uploads :D
@@BrockTheTrainer haha no problem hope we are being helpful in some ways
全鋁件還是有隱憂，已經有一些災情出現了
對阿~請小心愛護
請問有測試三種氣槽能正常打多少發嗎
M4匣=80-90發
中彈鼓=150-180發
大彈鼓=180-220發
如果以直接噴完整個彈匣的方式來算的話
@@4UADSmartAirsoft 感覺不錯的呢
i do hope aslo that if and when it gets to the EU both the lmg and spareparts for whatever rifle SMG and LMGs will be as easy to obtain i have the VFC MP7A1 GBBr but i cant get the spareparts i need for it other than ordering it from asia which unfortunately the shipping cost is as expensive as the item it self or more :(
I don't think, that it will be honest review, because you got it straight from VFC ;)))
For all of our videos We got everything straight from the manufacture ;)))
its easier to be critical when youve spent $450-800 on a VFC product ;))))))))
@@4UADSmartAirsoft Do you have permission to report all QC issues that you got on their products?
@@user-ye7jt8wz9n If I got issue with the gun I got I will show in the video, and that is whats signed on the contract :D for the others I really can't promise anything, since I don't work for the QC department for VFC :D
@@4UADSmartAirsoftmy PSG-1 valve striker housing came with chipped and VFC is ignoring my emails :((((
That the bipod lugs aren't steel is really stupid
Great vid as always! Love your stuff, is there a way to get the joules down for uk sites? Like 1.1?
I heard from VFC that for their japanese model they would put their nozzle valve sideways, this way it will cut the velocity down, otherwise short barrel works too
Google the CL Project Design Adjustable Valve, its essentially a universal VFC NPAS
I don't want one, I need one!
Gogogo
這帶去夜市打氣球才叫爽啦
應該會嚇死老闆
Innovation is the key for a better tomorrow. But, i'll not bought this one ^^'
hahaha sure I appreciate the honesty!
如果能出 HPA 套件就好了
其實五金行找的到轉接喔
@@4UADSmartAirsoft 太棒了， 謝謝
In short, VFC will break within a couple of months since most of the parts is made of alloy
Be nice to it XD
Mine was delivered two days ago and I feel a bit disappointed about this replica, especially when VFC used me to have outstanding replicas with a lot of steel and real welds, this one has a very thin frame made of aluminium and fake welds and costs like a full steel gbbr
Ohhh I’m sorry if you feel it that way, maybe lightweight machine gun isn’t for everyone
@@4UADSmartAirsoft I 3d modeled this LMG for the game World of Guns and I'm a bit obsessed about the realism of airsoft replicas, I'm just a collector so the realism factor for me is more important than performance or reliability 😂
@@Frappudazzu oh damn for that case you must be really disappointed haha
Remember no Russian
lol
Hpa parts when?
VFC? Can you hear us?
@@4UADSmartAirsoft wasn't this like an option on release? I feel like the dealers are going to make me buy so many different parts :/
@@SupremacyDealer Bro, all you need is an HPA tank, a low pressure regulator and a line. In a convenient place, a convector for the HPA line cuts into the gas tank. The gas tank itself in this case is used as a receiver. The operating pressure of the greengas is approximately 120 psi.
@@user-ix3nn6nl9j the problem is that it would have to connect under the mag..
Too many Donts in a machine gun is not a good thing.
This is a machine gun , machine gun!
Now that this is out the door, can VFC make some MDRXs, MCXs and maybe an RM277? XD (GBB only of course)
hahaha let me join the wishing group!
@@4UADSmartAirsoft Mention them the wishing group the next time!😁
VFC do both GBB and AEG MCX. the GBB is sold under the brand "APFG"
@@iDestr0 I know, gbb for me only, I left that part out of the original comment. And its a rattler only so far. And its a pain in the ass to get in europe.
What is 12kg gas in psi?
135
沒有後定？？
無彈不擊發，拉槍機不扣扳機有後定喔
@@4UADSmartAirsoft 會否有後定提示已彈盡？
@@YIUYIUCHU173跟AK一樣的概念
@@YIUYIUCHU173 開放式槍機本來就沒有無彈後定
英文字幕感覺可以不要，反正英文使用者不看字幕的，這樣畫面比較乾淨，然後英文口音讚！
這個我們來討論看看,順便做個問卷調查! 感謝回饋!
人家這個頻道是面向全世界
@@ccyy8747 所以更不需要英文字幕啊，英文區的用戶是不看字幕的，我就是用聽的，覺得字幕很卡才這樣說
@@vinson8459 那非英文區的呢
@@ccyy8747 要嘛不懂英文，要嘛跟我一樣
希望这不是最终成品，不然那个假子弹也太假了一点点。
不知道開火時扳機總成掉下來會不會跟真槍一樣無法停火www
czcams.com/video/YA22U7rh1UQ/video.htmlsi=05qw2KSXLw8BxViJ
會喔
M249 발매 하면서 가스 스토리지(?)를 왜 기본만 주는지 이해가 안됨
그냥 대용량 가스탱크 같이 판매하면 안되는 법적인 이유라도 있는지 모르겠음.
왜 옵션으로만 판매 하는가....
한국에선 옵션 탄창 사려고 해도 힘든 상황이 아주 많거든요..
VFC 회사에다ㅜ할 이야기를 여기다 적어서 죄송 합니다.
너무 갑갑해서요..
한극에서 사려고하면 160만원 좀 안됩니다.
미국 달러로 하면 1227달러 정도 합니다. ㅠㅠ
타이완이 너무 부러워요. ㅠㅠ