Rear differential fluid change & install. 8.8 Mustang, F-150, crown Victoria Explorer thunderbird
Vložit
- čas přidán 4. 01. 2017
- Gear install playlist here • Ford Mustang 8.8 Gear ...
Gear kit www.amazon.com/Yukon-Gear-FMU...
Pinion seal found here:
amzn.to/3sI3uMb
New pinion nut sold here
www.amazon.com/Allstar-ALL721...
Fluid pump here: www.amazon.com/Koehler-Enterp...
Gear kit 3.73s amzn.to/3vN91mq
Diff Cover amzn.to/3KcBJBg
31 spline differential
amzn.to/3tCOGhk
Master bearing kit here: amzn.to/3sH5Tqm
Royal purple gear oil 75w140 (2-3 quarts needed)
amzn.to/3vBtLh7
Friction modifier
amzn.to/3sKHalf
*Disclaimer, I am an amazon affiliate and may receive a commission for the referral, but you pay the same price
Full Version here: • Ford 8.8 inch Gear Ins... - Auta a dopravní prostředky
Thanks man! This is what I exactly needed help with on my 1994 Ford Mustang GT! I have the rear end gasket leaking, Instead of buying another one I was going to seal it up with gasket glue
1sik sn95 yeah, the rtv works well. The ford racing diff cover is great too cause it's so thick it doesn't bend. They sell off brand ones for a little cheaper. The stock cover is so flimsy
Will the bolts that push into the main caps leak ?
I am getting this cover for mine,,,thanks for the video
Cool. Remember to only fill the diff until it comes out the original fill plug. Good luck on the install
@@dannyjohnsonsgarage I having it professionally installed along with an eaton posi and 3.73 gears from a pro shop
Robert Swift In that case, make sure the shop knows it’s not supposed to overflow out the cover fill plug. Common mistake
@@dannyjohnsonsgarage yeah,,,i will mention it
what size is the drain plug on that ford racing cover ? I know the top one is 10MM allen socket apart from the factory 3/8 fill hole on inside of the 8.8 housing
5/16 Allen I believe
On the load bolts how do you know your not putting to much pressure? Get them snug then tourque?
Bill Burke It’s very minimal. 5 foot pounds. You want it just barely touching. Here is another video I recently made as well czcams.com/video/3UZBL9UD74A/video.html
The load bolts
How much was the girdle
Alexander The Great $180
Shouldn't you just be able to put the gear oil through the shift knob from inside? Gonna be my first time trying this
1sik sn95 that's how you add oil to the transmission, not the rear end. I have a video on that as well
1sik sn95 czcams.com/video/5ABs-ek5NPI/video.html
1sik sn95 that's for the manual transmission add fluid through the shifter .
Yea just take the shift knob off and add away