My scooter worked one day , plugged it in to charge overnight , the next day ...... No Power !! ....... Step one : Check the Key Switch ! ...... Good Tip ! ..... Thanks !
Hi watch this video I have the same mobility scooter I wanted to know if you can upgrade the battery on it to make it abit faster or what to do to make it abit faster. X
After replacing the battery - is not moving.. has power, but.. not going forward or reverse. Snd i put it on brake or on neutral.. is beeping, but.. not moving. Any suggestion?
Very good. I have a Pride ZT10 that is sitting dead as you show. Could it be that simple? 🤔 I cant find a fuse, so yes I will check the key switch. That may be why they sent a switch with the new console. Thank you.
On most scooters there is a fuse hidden in the control box usually located at the rear behind the batteries. If you are ever told you need a new control box (which are very expensive) before letting anyone charge you for one, if you are comfortable in doing so, open the control box up, usually just a few screws (isolate the batteries first) and somewhere inside there should be a fuse, usually a car (bladed) type fuse. If this has blown, replace it, check all the wiring is secure etc then fire it back up. If the scooter works as normal, you have saved yourself a few hundred pounds. If it blows again after fitting the new fuse, it usually will be because something has shorted out, or water has got in some where, but if you can figure out where the short is, fix that short and then pop a new fuse in and you will be good to go. These scooters can look complicated but they are so simple. Basically most are just a frame, seat, a motor some batteries and a few switches. Even the key ignition is just a switch and can be replaced with a normal switch. One good security tip if it is your own scooter and not rented, I suggest you buy a small waterproof switch and wire it in to the ignition wire (somewhere before it goes in to the key switch) then fit this new switch in a hidden place that only you know about. Then when you get on the scooter, flip the switch then turn the key to turn the scooter on. If you turn the key without flipping the hidden switch the scooter won't turn on. And seeing as all these scooters use the same 3 or 4 keys for all of them (for example if your friend has a scooter chances are that their key will fit yours) and these keys are also used on farmyard vehicles, golf carts, forklifts etc so are very easy to come by, meaning thrives who are on the look out for mobility scooters to ride off on, and probably have their own key, or let's face it, a screwdriver pen-knife etc will do the same. Some of them can be turned on using a 5p coin, well the thieves will be stopped because they won't know to look for your DIY immobilizer switch. So a switch costing £1 off somewhere like eBay can literally save you thousands on replacing a scooter.
Purchased a pride scooter battery and it worked the first time but wasn't able to charge overnight every night now it won't take a charge what happened?
We have a Gogo elite Traveller Scooter. We took it to Batteries Plus to get a new battery. I had him check the charging cable as well. He says he did and its fine. My dad literally uses the scooter 3 minutes a day to go through our subdivision to pick up the mail, and thats it. After 5 days using it he can barely make the trip back to the house. If its not the battery and the charging cable is good, what else can it be? Thank you
The coil in the electric brake can become weak over time, and as the battery voltage drops during normal discharge it applies the brake when it shouldn't. E.g. Fully charged scooter, accelerator applied, 24v goes through the motor and 24v through the coil in the brake - result is that the motor is fully ON, and the brake is fully OFF. Scooter at 23V (slightly discharged), accelerator applied, 23V goes through the motor, 23V through the coil in the brake - motor is fully ON, brake is slightly ON (due to coil no longer working properly). This results in a slow speed when the battery is not completely full as the brake is partially on when it shouldn't be. Electric brake coil failure can look like a worn out battery, which can be immensely frustrating as you buy new batteries and the problem persists as soon as the batteries are not completely full! Sorry for taking 10 months to reply!
@@peters2620 haha I couldbe been dead by now. I honestly didnt even know what this was in response too. We fixed it, I think it was just the charging cable which he swore was good, was not....so we got a new one...I believe thats what happened//
Press reset switch on battery box, check fuses on battery box or chassis and replace if burned. Make sure battery is fully charged. Battery or charger may need replacing . If you have a scooter repair service, call them for help.
It seemsas though the overload cutout has activated. Si ply press it and it should reset. If you still have no luck try removing the battery box, clean the terminals and replace.
It's good you didn't edit your mistake before soldering cus I'm sure it opens up eyes to whoever is fixing one. Good video thanks bro 👍
I have a scooter (Drive 2019 mode)l only used once on delivery. It is folded and I can't get it to unfold, no charge,no power. Can you advise
My scooter worked one day , plugged it in to charge overnight , the next day ...... No Power !! ....... Step one : Check the Key Switch ! ...... Good Tip ! ..... Thanks !
Where can I get a replacement charging cable
Hi watch this video I have the same mobility scooter I wanted to know if you can upgrade the battery on it to make it abit faster or what to do to make it abit faster. X
I have ewheelscooter M34 beeps 7 times when pushing the power switch on can you help??
My scooter battery is overcharged is there way any way to rectify this besides getting new batteries
Awesome thank you all working now
After replacing the battery - is not moving.. has power, but.. not going forward or reverse. Snd i put it on brake or on neutral.. is beeping, but.. not moving. Any suggestion?
Very good. I have a Pride ZT10 that is sitting dead as you show. Could it be that simple? 🤔 I cant find a fuse, so yes I will check the key switch. That may be why they sent a switch with the new console. Thank you.
On most scooters there is a fuse hidden in the control box usually located at the rear behind the batteries. If you are ever told you need a new control box (which are very expensive) before letting anyone charge you for one, if you are comfortable in doing so, open the control box up, usually just a few screws (isolate the batteries first) and somewhere inside there should be a fuse, usually a car (bladed) type fuse.
If this has blown, replace it, check all the wiring is secure etc then fire it back up. If the scooter works as normal, you have saved yourself a few hundred pounds. If it blows again after fitting the new fuse, it usually will be because something has shorted out, or water has got in some where, but if you can figure out where the short is, fix that short and then pop a new fuse in and you will be good to go.
These scooters can look complicated but they are so simple. Basically most are just a frame, seat, a motor some batteries and a few switches. Even the key ignition is just a switch and can be replaced with a normal switch.
One good security tip if it is your own scooter and not rented, I suggest you buy a small waterproof switch and wire it in to the ignition wire (somewhere before it goes in to the key switch) then fit this new switch in a hidden place that only you know about. Then when you get on the scooter, flip the switch then turn the key to turn the scooter on. If you turn the key without flipping the hidden switch the scooter won't turn on. And seeing as all these scooters use the same 3 or 4 keys for all of them (for example if your friend has a scooter chances are that their key will fit yours) and these keys are also used on farmyard vehicles, golf carts, forklifts etc so are very easy to come by, meaning thrives who are on the look out for mobility scooters to ride off on, and probably have their own key, or let's face it, a screwdriver pen-knife etc will do the same. Some of them can be turned on using a 5p coin, well the thieves will be stopped because they won't know to look for your DIY immobilizer switch.
So a switch costing £1 off somewhere like eBay can literally save you thousands on replacing a scooter.
Can i see how are wire conectet inside batery box becose someone stolen it from a friend scoter?
Pride sport scootet?
Purchased a pride scooter battery and it worked the first time but wasn't able to charge overnight every night now it won't take a charge what happened?
NICE FIX!
We have a Gogo elite Traveller Scooter. We took it to Batteries Plus to get a new battery. I had him check the charging cable as well. He says he did and its fine. My dad literally uses the scooter 3 minutes a day to go through our subdivision to pick up the mail, and thats it. After 5 days using it he can barely make the trip back to the house. If its not the battery and the charging cable is good, what else can it be? Thank you
The coil in the electric brake can become weak over time, and as the battery voltage drops during normal discharge it applies the brake when it shouldn't. E.g. Fully charged scooter, accelerator applied, 24v goes through the motor and 24v through the coil in the brake - result is that the motor is fully ON, and the brake is fully OFF. Scooter at 23V (slightly discharged), accelerator applied, 23V goes through the motor, 23V through the coil in the brake - motor is fully ON, brake is slightly ON (due to coil no longer working properly). This results in a slow speed when the battery is not completely full as the brake is partially on when it shouldn't be.
Electric brake coil failure can look like a worn out battery, which can be immensely frustrating as you buy new batteries and the problem persists as soon as the batteries are not completely full!
Sorry for taking 10 months to reply!
@@peters2620 haha I couldbe been dead by now. I honestly didnt even know what this was in response too. We fixed it, I think it was just the charging cable which he swore was good, was not....so we got a new one...I believe thats what happened//
Do you know how to make them faster...
Turning off speed restrictor or something ?
bigger battery’s or bigger motor
Bigger wheels faster, but .... less climbing power.
I have a over charged scooter battery how can I fix that
Do you know how to change the key mechanism that's what I need to figure out
Yeah just buy a new key barrel and solder the 2 wires to it
I have a sterling little star and went over a speed bump and it stope working any idea's
battery jumped and lost connection?mine did that over a bump-shoved it outta the way,and resat the battery-fine
great vid nice scooter
He ow do I how do I replace my charger cable
Nice work! I just paid a grand for one 🙈
Thanks 😊
Well done.
Glad it helped. To help support my videos you can buy me a coffee using this links www.buymeacoffee.com/DawgWillFixIT
Thanks
Y mobility scooter wont charge the original charger broke so we got one from batteries plus it still won't charge
Price???
Same problem. No key switch on scooter. Closed vid.
Brilliant😂 hope mine is just the battery 👀
Get on wiff it brit.
Maybebspend a couple more bucks on the key;) Naw good job man I think the same thing might be wrong with the ine of these that is in my garage.
Mine turns on no movement
Press reset switch on battery box, check fuses on battery box or chassis and replace if burned. Make sure battery is fully charged. Battery or charger may need replacing . If you have a scooter repair service, call them for help.
5
my scooter is fully charged horn works lights work but just wont go please advise its gogo elite traveller
Simply. Donate to old. Age. Disable person. He. Will bless. You
It seemsas though the overload cutout has activated. Si ply press it and it should reset. If you still have no luck try removing the battery box, clean the terminals and replace.
Possibly the potentiometer/pot/throttle. Three wires check each for power.
It's The Switch
WTH is a "Quid", or did you only want only Brit views?!?
When I switch mine on the 2 wee lights come lon and it won’t start help plz
Can you fix mine plz