Mailbag!
Vložit
- čas přidán 6. 02. 2024
- Vacuum Tube Octal Socket s.click.aliexpress.com/e/_DlX...
Vacuum Tube Octal Base s.click.aliexpress.com/e/_DEI...
Hex head screwdriver bit set s.click.aliexpress.com/e/_DFf...
Compact Flash to IDE Adapter s.click.aliexpress.com/e/_DCn...
4 Pin RGB LEDs s.click.aliexpress.com/e/_DmZ...
LM13700 Operational Transconductance Amplifier s.click.aliexpress.com/e/_DDa...
If you'd like to support the channel, you can:
Support me on Patreon: / gadgetreboot
Become a channel member (click the Join button): / gadgetreboot
Shop through my affiliate links (I may earn a small commission, costs you nothing)!
Banggood www.banggood.com/custlink/3vK...
Aliexpress s.click.aliexpress.com/e/_AFeHwB
Amazon.com www.amazon.com/?&_encoding=UT...
Amazon.ca www.amazon.ca/?&_encoding=UTF...
Videos are mirrored at LBRY/Odysee: odysee.com/@GadgetReboot:4
#ElectronicsCreators - Věda a technologie
GFI is a must in a wet environment, felt the tingle once then it tripped, probably should have tripped before I felt it.
Getting through hole is getting harder, and usually more expensive if you can find these. Good way of doing it with the conversion boards for prototyping or one offs. Excellent video have a good day.
The worst electricity interaction I had was long ago experimenting with a helium neon laser where I think the power supply was putting out a few thousand volts. That’s the day I learned that electrical tape is only good to insulate up to a couple hundred volts.
That low voltage MT8870 looks interesting for the phone line circuit to avoid level shifting when running ESP32 at 3.3 👍
I’m anxious to get back into that project as soon as I can wrap up the others I have been doing over the winter.
Well spotted on those caps ;)
Some nice bit's, one of my PSU has just died, put a few CAP's in the last time it died so now ordered the rest to see if this will get it back up and running.
If not it's down to fault finding on a PSU where there are no circuits for it on the Webs.😞
Not played with DTMF for years, about 30 or so, We had our own telephone system design so did quite a lot with slow processors of the time.
i’ve been using an old audio receiver probably from the 80s recently and suddenly every time I turn it on there’s a little static in one speaker for a couple of seconds so I’m wondering if that has some capacitors that may need to be looked at. it’ll be placed in the corner with other things that need the lid opened for inspection.
I've a transceiver which was not used for about 38 years, it worked for a bit then the receive audio volume slowly reduced over a few days until it went altogether. that's been in the too Do pile for a few years now 🙂@@GadgetReboot
Nice thumbnail! I made AI art for my CZcams banner 😆
I need to update my banner as well it’s from two residences ago. What image generator did you use? I was having hit and miss success and failures.
@@GadgetReboot I am using a custom Python script with the openai library querying the dall-e-3 model. 👍It is indeed very hit or miss, I find the best results come from either giving it very little direction to having it first construct 3D frames before applying texture skins ... one can get really detailed in a prompt but so far I am having the best results by allowing ITS imagination to go wild ...
@@GadgetReboot I think your banner is really cool and artistic, personally i wouldn't change it, even less for an AI generated image, but that's just my opinion...
Please don't use AI art, This has nothing to do with the topic of the video anyway
Depicting an electronics workshop including the name of the channel in a dystopian world, sounds on topic.
Disappointed to see you using AI artwork, given its trained on stolen work of artists photographers and creators
What a weird opinion...