My Girls Buy '75 K10 Squarebody! Will it start and drive home?
Vložit
- čas přidán 29. 03. 2024
- 15 year old twins buy their first squarebody project truck!
▶️Watch me fix this CEL code: • I gotta get this truck...
💰SCHOLARSHIP LINK: bold.org/funds/hamiltonville-...
💁🏻♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
🎁 AMAZON STOREFRONT*: www.amazon.com/shop/hamiltonv...
🔧🔧 Michael Pro Tools: gomichaelpro.com/
Save 15% with code "HF15"
🇺🇸WEIGH SAFE HITCH: www.weigh-safe.com/
SAVE 15% with code "hvf10"
👨🏻🌾 👩🏼🌾 Our website!
www.hamiltonvillefarm.com
🔦OLIGHT: www.olightstore.com/s/L52J86
SAVE 10% with code: "HF10"
MAIL: P.O. Box 183, Vernon FL 32462
FOR BUSINESS INQUIRIES EMAIL ME:
hamiltonvillefarm@nanozebra.com
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission. - Auta a dopravní prostředky
▶️Watch me fix this CEL code: czcams.com/video/Xt-I7xo2bSI/video.html
You could have manually started the vehicle by using a small screw driver on the ignition switch.
Would have saved you a lot of time and is easily accessible on the steering colum. Have done this many times when the key and cylander rod fell out of ignition switch which appears to have happened. Thats why the key didn't return to the run position.
Jose de Jesús cisneros Lemus very very very very good your videos 🎉🎉🎉🎉🎉🎉🎉🎉
@@kenkarish826Jose de Jesús cisneros Lemus
The world needs more parents and grandparents like you to get them kids off them Electronic devices and out and do hands-on good job.
They will never forget the things you done for them, it will last their lifetime. Great Job Hank. They will probably keep this truck for a very long time as well.
Really-? A boomer,exploding gM pickup yikes these poor girls don’t know what they are in for,nice that they are into it though-shame on gM for building the “square body” for so many years,but they got away with it
Yep I've had my 72 Cheyenne truck for 35 years that I got from my pa and everytime I drive it i think of him....RIP pa I miss you
Put old shifter on colom in park it will start
Cause that’s what grandpas are for!!!!! Awesome job Hank.
Easy check on if you're getting the signal to start from the key is check the smaller wire going to the solenoid on the starter for voltage. Use your voltage meter - Key off = 0V. Get someone to hold the key on = about 12V. Then you know the problem isn't in the vehicle - it's a problem with the solenoid or the starter. If you tried using a screwdriver across the terminals on the solenoid and it still didn't turn over, then it's a bad solenoid or the starter. Great that you're teaching your girls to do mechanics for themselves - every young person (both sexes) should know the basics at the very least so they can take care of their vehicles themselves but also not get taken advantage of by shady mechanics.
Noticed the steering column still had the selector ... if it is still hooked to the safety switch and not in park position on calum...no beano...no start.... so check it quick. Then chase your power supply to switch if not the safety switch.😉👍
Exactly what I was thinking
I was yelling that to my TV the old shifter was knocked just enough to not turn the key all the way or no start
@@genebrewer1422 😄😄😄I kinda was also
lol I was yelling at my tablet too! Turn the column
Exactly you are 100% on point I've been a mechanic ever since I was a little boy and I've had many trucks is it have the exact same thing so yes make sure that the steering column is in the park position or neutral
Somebody at GM had the ingenious idea of wrapping the exhaust right around the starter, I had to replace a solenoid, and I've heard about others doing the same thing, you have to wait until the engine cools down until it will crank up again. Other than that, those 350s are great engines. Beautiful young ladies, I bet their parents have to constantly chase off the young men that are hopelessly in love 🙂
@davekauffman8727 .. it didn't run long enough for the starter to get hot enough not to work .. that's a column shift truck thatwas converted to floor sometimes you have too turn the bowl of the column to make sure the neutral safety switch is engaged..
So awesome that you spend time with your granddaughters! This will mean a lot to all of you and they will never forget this! Great video!
It used to be a column shift. Sometimes you have to wiggle the oh gear selector on the column and it might start.
I thought the same thing
I've had several of those trucks that was manual to automatic transmission swapped and the automatic column shift to floor shift automatic swapped almost always require messing with the shifter tube collar and finding where it is supposed to be and holding it up usually while trying to start the truck it's why on the three of them swapped nightmares i ended up with i put manual shift transmission steering columns in them got tired of messing with the shifter tube collar to get it to start..
I'm just at the go kart stage with my grandson, but trucks are just around the corner! 😂 This will be a great series to watch.
Beautiful young woman enjoy every moment with them because as you know it goes so fast. My youngest daughter just turned 24 graduated college and left the nest. Man it flies and the best part is you’ll have a video of this remind you of the good times✌️
im glad to see how ur grand girls are always wanting to lear and u teach them cuz they will aways need that in today world i always share everone of ur videos to help u out have bless easter
It's great you get to spend quality time with your grandchildren. It's also rare to see kids that old interested in old vehicles let alone getting their hands dirty. I hope it all goes well and quickly so they don't loose interest and continue to like and save the old stuff. If it's not saved it's lost forever. Good luck and I can't wait to see the three of you getting it safe for them to use and enjoy.
That's awesome yall doing it together
I still have the 1977 C10 I was driving back when the wife and I were dating. Our son has claimed it, so at some point I've gotta help him get it roadworthy again.
This reminds me so much of myself and my daughter. The two.of us built an 86 square body with a built 5.9 and a turbo 400 trans to go sled pulling. I spent way more money on it than my wife liked but I new where she was every Saturday night for months of the year and she wasn't getting into trouble so I'd do it again in a heartbeat. Teach em the right way not the (Hank) way. Hahaha. -Enjoyed the video. Keep em coming-
Didnt think you were old enough to have grandkids that age.Sounds like you are already a bad influence.Classic truck, even had factory a/c, parts are everywhere and needs to be saved. Have a blessed Easter my friend.
hank good too see you doing what your doing with your grand kids, that truck is a 80's to 85 chevy 1/2 ton. 70 models the headlights are round and the side markers lights on a 72 to 79 chevys the side marker lights on the fenders are up and down instead if side to side like you have, but besides the grill and headlights and fender it's basically the same truck despite minor changes.
hank your correct on the year it just has a 80's hood and front end on it. the interrior guages are 73 to 79 square body
Hank, you better get ready to get those twins new manicures at the nail salon after working on that project 😄😄
😂that's written into their contract!!
Im 13 and got an 82 k20 nice to see other people my age enjoy these trucks
And here I thought you was an old man 🤣 1: old chevy are 2 key, square ignition round doors. 2: I noticed it's still has the column shift, so maybe it got bumped so the neutral safety switch knocked out. 3: there's a rod that goes from key switch thru column to can't remember name to box close to firewall, and4: if it's a '75 it's got a newer front clip. 73 -80 have vertical marker lights and 81 up have horizontal
Not only that but the '73-'79 have round headlights not square
Love to see young folk into the old square body trucks!! And even more so with theses young girls with there nails and all they still put that tire on with no hesitation!!
I love these trucks because you can get to everything easy and you can crawl under the hood with the engine if you need to. Love the older trucks. Nice find y'all.
My best guess, or where I would start would be the safety neutral switch. The old GM trucks had the safety neutral switch on the steering column in the column shift design. This means that it doesn't matter where the ratchet shifter is, as long as the column shifter location is correct for the safety neutral switch. As close as the ignition is to the old column shifter location, I wonder if it got bumped the last time it started...either way, best wishes, hope it all works out. Great video, thank you for sharing.
Correct
Have a blessed Easter to you sir and your family! Thank you so much for continuing to put out fun and wholesome content for us to enjoy.
The old shifter collar on the steering column has to be in Park or Neutral position to start. Had to figure that one out once before myself, Ha.
Giving your granddaughters memories that will last their lifetime
Hank I see it use to be a column shift maybe the column safety switch is still hooked up make sure column is all the in park
You know some of the best memories I have is working and learning how to do things with papa even though everything had to be done his way or it was wrong I still enjoy spending time with him still do he’s 82 still gets up and works every day he got the body of 50 year old
That square body looks to be in pretty good shape I bet it will make a nice one I enjoyed the video Happy Easter everyone
Happy Easter!
Happy Easter, and God bless you! Jesus is alive!
@@HamiltonvilleFarmyour two daughters are so funny and cute I hope y’all are having a wonderful weekend 😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎😎
Papa Ham! That’s awesome. My little grandbuddy calls me Papa Don. Those girls will remember this forever. That’s the kinda things good ol’ country songs are written about!
Good Afternoon Hank and Happy Easter to your family and I hope you are having a fantastic day today , Sir ! 😊
Anyone can have kids, it's takes a real man to be a father. If the girls learn to do all that with their nails done, they'll be unstoppable without them 😂😂
Exactly 🧡🖤
Nice video buddy I'm gonna be going fishing and working on old cars and trucks making videos and going camping
I bet the girls will keep the truck forever as a sentimental value that they spent time with their grandpa
Great job Hank, it's good to see you and the granddaughters working on the truck together. I showed my daughters and sons somethings on cars, so even if they don't work on there on car they will have some kind of knowledge on cars. So they can't get shifted by someone else.
YOU'RE THE BEST HANK... FORGET THE REST. NICE TRUCK, LADIES. I'M SURE BETWEEN YOU AND PA-PA-HAM, YOU'LL GET THE OLE GIRL UP AND RUNNIN' REAL QUICK. FUNNY, I WAS 15 WHEN THIS TRUCK WAS BUILT. AND YOU YOUNG FOLKS ARE 15 NOW. SOME HOW I FEEL LIKE I'M PART OF THE BUILD IN A WAY... HOW BIZZAR... NOW PAY GOOD ATTENTION TO WHAT'S GOIN'ON, OK... CAUSE YOU NEVER KNOW WHEN TOUR GOIN' TO NEED SOME OF THAT KNOWLEDGE PA-PA GONNA TEACH-YA. **IT HAPPENS WHEN YOU'RE OUT AND ABOUT, AND IF YOU DON'T KNOW HOW TO FIX IT, WELL, I DON'T KNOW WHAT TO TELL YA. HANK, YOU'RE THE BEST FOR SHOWIN THESE YOUNG LADIES HOW TO BE PREPARED IN THE WILD WORLD WE LIVE IN. BESIDES, THE FAMILY THAT WORKS TOGETHER STICKS TOGETHER... CAN'T WAIT FOR THE NEXT INSTALMENT OF ( GREASE ACRES ) STAY COOL FOLKS... PEACE FROM CREEL CHIHUAHUA, MEXICO...🛻🚜💅 HAPPY EASTER ALL!!!
No sooner than you said don't chip a nail I was thinking if these young ladies get thru this project without breaking a nail I will be very impressed.😅
I would check the column shifter and see if it is all the way up , the park switch is probably still connected to it in the column and it would stop it from starting if it isn't in the right position. If thats not it, see if you have 12v on the bendick's wire at the starter when the key is turned, if it doesn't, then it probably is the ignition switch in behind the key tumblers is bad, It didn't look like it was springing back when y'all turned the key. I would be careful of that froor shifter because i bet it will start in any gear, because you aren't using the column shifter which controls the key safety switch
Great video. I had the 3/4 ton same year it was a beast. It loved fuel. The Young lady’s will love it
Great memories for all… what a great project.
Grands are special !
I usually end up dropping the ignition electrical switch off of left top side of the steering wheel and use a flat blade screwdriver and start the truck, and i say that because I have several auto to manual and manual shift three spd to automatic transmission steering column trucks why i suggested the manual shift transmission steering column because the blower motor whining shows the truck is getting power.
First thing is to check the battery connections before doing anything with the neutral safety switch or the ignition switch. A poor connection at the battery can give you power in the cab but wont be enough for when the starter tries to turn the engine over. Of course also check the battery cables themselves.
Be sure to go back for the four runner. The girls will love that one too.
Nice Truck. Don't Worry U Will Get There.
New Battery Starter
❤ those girl will have one awesome square body. When it's done. To me I believe the motor is a gm crate replacement. Buy the tag on the valve cover. N the slap shifter. Deffently a great rebuild projects great choice Grampa. This is one I'll be following. Can't waite to see it finished girls.
I have a square body gmc that had the collom shifter setup for the transmission I would check that out to see if that is in park
There is a rod that goes from the key switch to the connection switch it can fall out. easy fix..
yup, looks like the ignition switch down the column is shot
I think It's great what you are doing with these videos. Teaching this younger generation about the older vehicle mechanics Is wonderful. Great video and can't wait to see the next one. If the neutral switch Is still on the column then make sure to twist the part that had the original selector counter clockwise so It engages the switch so It will start. Just A thought.
Awesome having you do a video with your grandaughter's
They are definitely photo worthy (beautiful ). Enjoy spending precious moments with them
Badass truck! I had a 96 ram that looked about the same with lift and tires when I was 18, was a lot of fun! They will remember you helping them on this forever!
Sir this is absolutely wonderful, it warms my heart to see this family's need to be like this more and more love and peace to all.
Have a joyful and blessed Easter guy's
That's something else, ain't it? It started just a few minutes prior.....wow! It makes it easy to figure out the first thing to fix, that's for sure! It's gonna be a fun project for ya'll, though. 👍👍👍 These will be memories they'll have forever! 😎Thanks for sharing, Hank!!
Yeah it was nuts. Lol. Thanks for watching 👍
Hank I’m so glad that you are taking time and teaching them how to to work on the truck 🛻 and cars 🚗 you’ll have a great 👍 Easter 🐣 😮🎉❤❤
I can't wait to see the Old School Chevy K10 Square body Lifted Off-road.
Christ has truly risen
Happy Easter Hank to you and all yours 🙏🤗💐
Joseph from Lebanon 🇱🇧
He has risen indeed!
Neutral safety switch. Should have put the transmission in neutral and tried to start it. If the shift linkage is slightly tweaked, the truck thinks it's in gear and disables the starter circuit. And with someone doing a homemade column to floor shift conversion, they might not have wired that up correctly.
Mild cam, Edlerbrock manifold, Holley 650 cfm and some headers with 3" straights out the back. Then you will always know where the girls are! Enjoy them while they are young Hank!
its nice to see the younger generation learn about working on there vehicles
Hank, Last I recall, these trucks had an ignition switch attached to the steering column. The key tumbler just moves a rod that slides the ignition switch to the needed position. If that switch is not adjusted correctly, the rod can't slide the switch to the start position. Since the key didn't spring back from the start to run, i suspect the switch screws are loose and slid too far down the column.
Like others have mentioned, where that has been changed from column shift to on the floor maybe you will have to wiggle the column shift part to get safety switch to work to start truck. Pull up on column shift thing where lever was and try to start truck. Also, if it does not have a safety switch on the floor shift, it may start while in gear. Good video and two beautiful young ladies.
Love an old-school Square body build. An getting to see poppa Ham teach em how to work on there own vehicle priceless. Enjoy watching as always.
Too cool hank God bless ya'll enjoy spending time with those grandkids have fun guys
Take a set of jumper cables from the battery to the starter! Eddie
pops Hank you got your hands full with them girls
Hi Hank Might want to mention to the girls NEVER use a lighter to look into the radiator to see if low at night time Antifreeze is highly flammable Alcohol based it'll blow fire out the rad spout over a foot ,Learnt from experience myself 😮 That'll be quite the truck for a starter . WE used to call it Slap stick shifter ,They'll never forget first truck ,Hank I'd bet it's the neutral safety on the trans linkage ident probably partially in gear .
Papa Ham. I like that !
It could be the little button by the ignition that locks the steering wheel. If it’s not locked it may not let you turn the key to start.
Love the videos it's so awesome that you taking the time to to teach them and they are willing to learn also you should do a video teaching them to drive a big rig that you and wiley rescue
Hank --you are a gem. They will always remember .
listen to hank speaking like he knows anymore than these little ladies lol
Hell I was thinking it
Heck yeah can’t go wrong with old bow tie ❤
Good Man , right there !!!...Doin' stuff with those girls. THAT'S a good family member.
Good shape for the shape it's in
They got good taste in trucks I hope the best I hope we get some updates for what y'all have done to his truck great work dad👍
Just started the square body series.
I had a ‘79 F150 short bed. Had it all lifted but did not upgrade the steering box. Eventually the bigger tires tore the steering box off of the frame. This was 20 years ago, ensure steering and brakes are upgraded to handle the larger tires. Nothing worse than taking turns and the steering box is half working.
Also had the same steering wheel, not the same as steering with a normal sized wheel. Nothing g wrong with it, just some getting used to.
That’s looks like fun! I’m looking forward to seeing the transformation 🛻
I like that the girls are learning anything mechanical at their age and I think that all kids should be taught different and useful topics
great video - it will be a great project - the girls were just too funny when they were sitting in the truck
Good job getting it home!,I have a 74 C-20 ,and sometimes you have to Chase little grimmlings😈,but there worth it!My 16 year daughter us coming around to her father’s Square Body🤠🇺🇸
And they are a whole lot of fun to play with in the field in 4x4, and for the rear end noise make sure it is not a bad rear u joint or carrier bearing or one of the other u joints that could very well be what the rear end noise is
Really good bonding time between there dad
Excellent video Hank :) also those truck have Solilendo on top starter possible needs new completed and would change key ignition switch on were key go in and rod linkeage needs hook up if not on bottom of steering wheel there igniter box needs replaced and rod linkeage may come out too! Check those all and should fire up no problem!
Learn them young and in the right way and they will be able to look after them selves through out most problems in life 👍
more than likely the neutral safety switch is turned to reverse location try turn the shifter hub where the old factory shifter is. Love seeing your grand kids working with you.
Those are easy to repair. Was that a column shift at one time? Check that for the key problem.
It's awesome to see the younger generation interested in old Square body's awesome watch
them 2 young ladies are awsome, hope they enjoy their truck
The twins are very respectful.
Awesome! I love Square body Trucks and Sunshine!!! Rock on guys!
That is a really nice truck
These trucks are so easy to work on if its not starting chexk battery or starter. Easyest truck ever to fix
Hank check wires going to starter the purple wire is for stsrting they get burnt buy the manfoild getting hot and start short to colum if it was automatic it has park safty switch the switch is down at the bottum of colum
Hank got me rolling over here over the column switch malfunction
Cool beans bro. I been doing this with my kids there whole life but it's never to late to learn
great video good to see family involved
Just a bit of useful advice for messing with vehicles that have been sitting around with no hubcaps or no lugnuts on the wheel lube the threads of the lug nuts and the lug studs because transmission fluid doesn't freeze, anyway the lug nuts will go back on alot easier, and I have had several gm square body trucks usually k20 and c20 trucks but oh well.... I also had a carmine dark red and frost gloss white 74 chevy Cheyenne super c10 long bed 2wd as a sofmore in highschool and my junior year freshman year i had a two tone light on top lower dark mint green 74 dodge d100 club cab short bed adventurer trim flatbed truck...
cool old truck lots of potential great video
Wish you and the girls the best of luck with the truck seems like a decent project ive drove worse shape round eye and 81 -87 doghouse which is what is on the front of the 75.. and why it doesn't have a inside hood release that was a option for the higher trim level gm square body truck for 1979 and the truck is a 1975, but for 1980-1987 they used a interior hood release, and the 1979 option inside hood releases looks like a ring welded on the end of the hood latch, the starter solenoid could be busted i guess and i have always used it as good advice as to not be sitting on the road somewhere to just go ahead and if it is swapped out to hei and it is a 1975 so it should be from factory put a brand new ac Delco ignition control module in the distributor and i say that because i have had iffy luck with parts store brand ones and have gotten several vehicles that had weird ignition issues when running or wouldn't run at all and it is sometimes the ignition control module, and another thing to look into the sector rack is what the ignition switch rod is connected to inside the steering column on the back side of the ignition key cylinder is a sector wheel it is a chunk of plastic well if they get brittle it could break and then that would not engage the ignition sector rack to push the indent on the ignition switch on the steering column so that is probably where id start diagnosing the issue mess with the shift collar moving it up and down and see if it is keeping you from engaging the ignition switch to the crank position and if you don't get anywhere there drop the steering column pull the bottom center dash metal collar trim panel and access the two steering column collar mount plate nuts after removing the bottom of the dash metal panel that plastic piece you already took off is screwed to, and after you lower the steering column up on the left side towards the firewall is a couple of small bolts i believe like 11/32 that is what holds the ignition electrical switch to the steering column it should spring forward when you loosen the bolts pull it up off the rod, and use a screwdriver or i guess a small pick tool would probably work too, but i usually use a medium size flat blade screwdriver put it against the hole in the switch where the rod was and try to get it to engage the crank function on the starter,if you have issues with the park neutral start switch for testing purposes just unplug the purple plug from the switch at the firewall on the top of the steering column and use a jumper wire 10 guage or so to jump both sides of the purple plug that should allow the truck to start regardless of what gear the shift collar would have been in hopefully this helps y'all