We rescued his daddy's farm tractor! First drive in 18 years!
Vložit
- čas přidán 25. 08. 2024
- We rescued his daddy's farm tractor! First drive in 18 years!
▶️WE GIVE HIS DAD'S TRACTOR BACK: • We RESCUED his daddy's...
💁🏻♂️Hamiltonville Farm MERCHANDISE: bit.ly/3pKO1aa
🎁 AMAZON STOREFRONT*: www.amazon.com...
🔧🔧 Michael Pro Tools: gomichaelpro.com/
Save 15% with code "HF15"
🇺🇸WEIGH SAFE HITCH: www.weigh-safe...
SAVE 10% with code "hvf10"
👨🏻🌾 👩🏼🌾 Our website!
www.hamiltonvi...
🔦OLIGHT: www.olightstor...
SAVE 10% with code: "HF10"
MAIL: P.O. Box 183, Vernon FL 32462
FOR BUSINESS INQUIRIES EMAIL ME:
hamiltonvillefarm@nanozebra.com
-----------------------------------------------------------------------------------------------------------------------
INSTAGRAM: @Hamiltonvillefarm
FACEBOOK: Hamiltonville Farm
*Some links are affiliate links. If you click on the link and purchase a product, then we receive a small commission.
▶WE GIVE HIS DAD'S TRACTOR BACK: czcams.com/video/hLyL9bSiS1g/video.html
🔧
👨🔧🔧
I did make a comment before you made yours, but I deleted it because I felt it might have been taken wrong. When I heard that noise from the solenoid I knew, it wasn't coming out. I can't tell you how many of them in cars etc. that I changed for years and I just turned 81. But I'm happy you got it running. When I bought the tractors I rebuilt, most of them came from Lancaster, PA in a field of weed, etc. I lived in South NJ at the time.
Hank, Teach your granddaughters to always hook up and tighten positive cable first, That way there’s no way to accidentally make a spark! Enjoy your videos from central Fl.
Really like you teaching the kids how to be kids again ! Hanging with grandpa
You know Hank it's the younger generation wanting to learn makes a difference in the world today's world. That's just completely awesome to see that my friend.
That pull up lever on the right side by the brake pedals is for the parking brake your PTO engagement is on the driver's side by the foot panel
Make yourself a note: When pulling(or pushing) to start, put the vehicle in the highest gear it has. The low gear make power when being turned by the engine, but when trying to turn the engine it works backwards and 2 pounds of compression will slide the wheels. If you put the clutch pedal down with the tractor being pulled in low gear, the clutch disk may be turning 4000 rpm and will sling off the cutch material.
Love when your granddaughters are on they are so funny when they understand you praise them good for you that’s our job keep up the good shows it’s all about the process with the good times with the girls. They will never forget don’t matter if it started that’s would just be a plus if they were there god bless
it is so amazing that you and your granddaughter are so close and working together. I wish i could see mine more often and was able to work like this with them. We all love to go fishing for trout and that is always an amazing day for us. They will learn so much from this and remember it always
The girls are getting very comfortable with " not a mechanic" very enthusiastic you go girls
Great vids Hannk!! I watch your channel and its good to see your grand daughters taking part learning and showing interest.
She patted the tractor and said Wake Up sweet girls Hank 🔧🔧🔧
I happy to see your granddaughters love doing will it start with you
Awesome video Hank!! you and the girls make a great team!! and y'all are making good memories! so cool to see that tractor start after sitting for so many year's!! And move!!
Thank you!
Man, I love those old ford tractors. Its hard to kill them. Another good video
Hank....c'mon MAN!!!!!! There is no such thing as choke on a diesel!!!!!! LOL
Yep! I think what he’s pulling out thinking it’s the choke is the fuel shutoff to kill it. Doh!
Yep I been laughing at this. We've got a tractor just like this one. Let it sit for 3 years at a time and she fires right up.
Y'all must not have the tenacious mudd daubbers we got in West Texas! They can CHOKE anything that doesn't have a proper screen!
He he. Takes me back to life on a farm. We used to tap the solenoid. No choke on a diesel. The little lever looking like a choke is normally the kill lever.
Oh and pull start. It resisted to much. I would think a higher gear. I’m not too sure, not being there.
It’s always easier to sit on the sidelines judging.
Not trying to teach you as you have allot of knowledge around these old machines.
Good job on not giving up and finding the solution.
🔧
That tractor has a neutral safety switch, you have to have both shifter levers in the neutral position for it to start from the key
That looks like fun 😊. Thanks for sharing 🙏.
We love you Hank, you're a great guy, and a great granddaddy to those girls (young women, sorry ladies!), that thing that moves the starter pinion out into the teeth of the flywheel is the "bendix", which needs some love. That should energize and come out at the same time when the solenoid gets power, if the starter is wired correctly, you were doing it right. Dub and Zee, you are beautiful 🙂
Wow that is a stout neat looking little tractor GOD Bless You Guys
I love how you want to teach the girls. Keep up the good work!
He wants to teach them but they wont learn if they dont want to!.. and watching them 2 i can't be the only 1 that sees that they have no interest in what his teaching them like they have better "cooler" things to go do... 😅
Granddaughter doing good job Hank
🔧🔧🔧🔧 I think Dub and Zee are ready for shop class. 👍👍 maybe auto mechanics too! Awesome job getting the Ford running again, Hank! Patience and Perseverance is what it takes.....the 2 Ps! Thanks for sharing!
Thanks 👍
Nice To See The Granddaughters To Get Involved
🔧 those old fords are some of the best
Man I'd loved to know where that choke lever is at.
Don't ever remember one on a diesel engine 😂
The injector pump on this one is probably a vacuum pump. There is a plunger in them that can get stuck which will make it run max RPM. I had that happen and took the front of pump apart to free plunger and clean it. That may be why it is running high. Anyway, cool video and nice old tractor. Keep putting those videos out, I love em!!!!!!!!!!!!
Isn’t this about 1970? Like 1960 or did I misunderstand Them. Thank you
It’s a Simms inline pump with mechanical governor. Fordson major had vacuum type
Good job and God bless y'all
if you pull start with a high low trans you need to be in high and gear box in highest gear
Very awesome Hank thanks for sharing buddy you and your granddaughters did a good job I appreciate you guys 👍
🔧🔧🔧 Top Job mate you succeeded in starting the tractor. Awesome job mate.... 🔧🔧🔧
Someone please help these guys with starter operation lol. Good video hank.
Awesome video Hank you got it going thats what counts it was nice to see the twins in a video again
Fantastic! I like seeing old machines like that brought back to life. There is another channel i watch, Cog Hill Farm, where Jason got his granddaddy’s old Ford 8N running a few weeks ago. It needed a bit of work but it’s a thing of beauty😊.
I'm good buddies with Jason.
@@HamiltonvilleFarm That is awesome! He is one of the most entertaining of all the homestead channels. Love his interactions with all the animals😅
Those two girls are just a hoot!
Hank that little blue lever that you had ahold of is for the hydraulics external hydraulics your PTO is on your left hand side
Quick tip look at the back of the solenoid by the small terminal and look for a S on the plastic and for a diesel they should only have a single wire about a 14 gauge wire to engage the starter
Grate video hank Teach The Sisters The Right Way ❤❤❤❤❤❤❤
The choke😂😂😂😂😂 you’re probably pulling fuel shut off.
Yeah that was one of them "duh" moments. Lol
BRAVO greetings from Bulgaria ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Good father and good daughters.
RESPECT
Loving this first video seen by me from here in Vermont. Looking forward to your upcoming ones! God's Blessings.
The lever next to the lift control is draft control for the 3 point lift.
The fuel rack is stuck wide open that's why you can't throttle it down. Also there needs to be oil in the injection pump for lubrication. If there is not it will damage the pump very quickly. Same oil you put in the crank case. The rack is behind the cover that says SIMMS on it. Spray it down with PB BLASTER and work it back and forth till its freed up.
Ok cool. Thanks.
I didn't know a diesel had a choke
Make sure to tell the girls that while tightening the battery clamps to make sure not to short out the positive terminal to the tractor body with the wrench I noticed this almost happened.
🔧man those little ford tractors are pretty sweet
❤ This is special....God be with you guys 😎
Well done.❤
Hello from Tennessee ❤❤❤❤❤
Thats so cool.
dont put on ground until positive is tight
An Old Apple Grower up here had that very same tractor , It served Him well for a long time .
Love you all's video
Thank you
whoa hank, we had this talk before. you must energize the solenoid on the started to pull in the plunger. that sends the current to the windings. there is no ground on the switch. that is a control devise, you only need a ground on a load devise. in automotive the chassis is the ground. that is why a battery terminal is connected to it. supply a b+ current to the s terminal of the solenoid with your jumper, and the plunger will pull in sending current to the starter windings
Sitting on tractor driving it after getting running....I saw MR. DOUGLAS of GREEN ACRES
Show that tractor next to what is that tractor next to it
I want that tractor next to it
Where is that at
What state and where are you at
Please reply
🔧 Great job!👍🏻
those two young ladies are funny
Hank😂oh boy zee and dub got to see what the screwdriver 🪛 looks like when sparks fly from the starter
It was very nice. I’d like to see the girls drive get a chance.
Still here i always watch to the end
I appreciate that
Making oil!! Love it!!
😊 Good job. Safety first
hi it has got to be the most entertainment vid you and the girls have made so far lol
Bolt the starter back on and use the Spade connection closest to the motor to make the starter engage. From what I can tell it looks like the starter Bendix may need to be cleaned up is trying to come out but it's not coming out all the way
first found your channel with the truck you brought for your grand-daughters the title confused me for a few mins when you put my girls but then you said your grand-daughters it made sense im guessing your there father's father anyways love your videos
Their mom is my daughter. If you look back at some of my thumbnails, you'll see my daughter in them and she makes an appearance in some of the videos as well. 👍
@FL.AirBoater
1 month ago
New viewer here 93rd or 4th video). Your granddaughters are adorable. But you really need to Teach them to always hook up and tighten positive cable first for their protection/safety.
Great video,very informative, You go girls
Hank complimenti mitici e simpatiche e brave le ragazze super prof. Hank
Very Good Video!
Cute girls but you have a lot more patience teaching them than I would have.
You would if you were their grandpa....it makes you look at things different :)
🔧🔧🔧🔧🔧🔧 Wrong terminals!!!!! Lol. Good stuff, man!
Pull starting old tractor there’s a sweet spot on which gear to use usually 3rd to low or high won’t start wasting time
🔧🛠️🔧🛠️🔧. Hello Hank,Dub &! Zee. I remember the 3000 Ford tractors very well.,The farm where I lived as a kid in the early to late 1970s had a 1970 Ford 300 gasoline that was a great all around tractor.
We mostly used the Ford 3000 tractor with a C80 Woods pull behind mower and to spread manure from the thoroughbred broodmares and foals with a New Holland manure spreader. That tractor was great for doing just about anything you wanted to do on a farm. But I absolutely despised how the clutch pedal seemed to stick straight up which made it very difficult to let out easily on the clutch without lunging forwards.
My dad and his friend used to fuss at me quite a bit when we were loading tobacco onto the wagons which is the very last place that you want a lunging tractor. Unfortunately when the owner of the farm sold the property, He let the tractor go with the farm much to our disgust. Ford really improved the later versions of their tractors when they started using the shuttle shifters.
Thanks for sharing!
Hey hank dub and zee the sparks are flying
If you take the side plate on the side of the Injection pump that says simmions and see if the rack in side is stuck it should move back and forth
On the right running board on the back of your heel is the brake block. You press the brakes pull the latch up and twist it to lock it. The lever you thought was the PTO is for the hydraulics and then below the lift there’s a little lever it’s in the horizontal position right now, but that’s your draft control for your lift arms.
👍
Bring back memories please before you sit on a tractor that has been sitting look under the seat for bee nest they lit me up I was a athlete I instantly cleared that tractor I was moving so fast because only one stung me on the ear ouch it hurt
Make sure they shut off cable is pushed in. It’s below the throttle handle. Turn ignition key on pull throttle wide-open put it in high gear. High range hook the truck to it pull that thing off and crank it.
Take the starter off go through it to get it working or replace it then you can check the points for spark
Amazingly he never thinks to push in the clutch on tractors or trucks when they won't spin over which both usually have safety circuits. Tractors usually have to be in neutral with PTO disengaged
Love the grandchildren. Please remind them that working on cars and tractors.... Getting a finger ring across 12 and ground will turn their ring red hot. I've seen some nasty movies on safety. It can cook to the bone. And it is super fast. Gold and Silver conducts very high currents. Safety first - heavy black gloves are best if rings can't come off. Safety first.
You probably need fresh fuel and then prime and remove air. Cheers, your doing great.
Hank it looked like the tractor was in reverse gear when you were pulling it
I saw that in the replay, but I'm pretty sure we had it in a forward gear 🤷🏻♂️
Getta Done ✔️
You doing all good bro nice work
in order to start without key, plus cable must connect TO solenoid connector
If you would have used a small Torch to light it and use it on the starter for a little bit to get it warm.
It might pick and turn over
On that starter solenoid the Spade plug on the inside closest to the motor is the one it comes from the ignition
That's awesome I want to see the continuance of that video
Great video
🛠️🔧 awesome job. The girls is missing out.
The novel on the left-hand side of the dash is the lights
🔧 I been watching since you started .
Thank you
Thanks!
Thank you sir
Take off the top of the solenoid and clean up cup of washer and it will work
Brilliant
🎉I want thày. Next to that Ford 3000 they for sale they going keep them
Should always put on and tighten the positive battery cable first ..
🔧 it happens Hank sometimes man. Those international Ford engines and starters are different and some are just like the international harvester's engines and starters wiring set-up and designs to. Not always though some of the times their the same way. I like watching the videos either way.
The trottle bar is disconnected from the injector pump.... its at the back of the pump close to the engine block