Flip’n Pallets into Cash | Make Money Woodworking
Vložit
- čas přidán 19. 06. 2024
- Flipping pallets is a great way to make big money in woodworking , in case you missed it this is a pallet coffee table I made earlier this year ,
Enjoy
#woodworking #diy
Bearded Viking merch now available:
bearded-viking-shop.myspreads...
My hardwood supplier 👇
Tell them Bearded Viking Woodworks sent ya
The Finest Figured Hardwood Lumber | Northwest Timber
nwtimber.com
14" 1-3/4 HP Extreme Series Resaw Bandsaw - Grizzly Industrial
Elegoo Lasers
www.elegoo.com/
www.lowes.com/pd/SKIL-7-1-4-i...
www.rockler.com/gvs-elipse-p1...
www.uline.com/Product/Detail/...
www.rockler.com/portable-dril...
www.lowes.com/pd/Bosch-1-HP-V...
www.homedepot.com/p/DEWALT-20...
www.lowes.com/pd/CRAFTSMAN-12...
www.lowes.com/pd/Kreg-Kreg-Ji...
www.lowes.com/pd/Pony-3-4-in-... - Zábava
The pallet wood did turn out to be good looking. I also appreciate how you showed working with "minimal" tools. Nicely done! And, thank you as always!
Skål 🫡
The clamp closing with a snap in time with the music (at 6:48) was very slick and made me smile. Great job on this one as usual!
You’re the first one to notice or at least comment about it. It’s the little things that make a video. Thanks for having 🎵 rhythm
I invested in a pallet buster and the air locker de nailer and I regret not getting it sooner. If anyone works with pallets a lot go ahead and get them. I can break down a pallet and take the nails out in less than 10 minutes. And if you plan on running them through your planer get a metal detector. Drill out the nail holes because there’s little pieces of metal in every hole whether you see it or not. Make some sawdust. Daniel is way ahead of us😂
Indeed thanks for the tips
Hi Barry, I was just wondering why there would still be metal in every hole if the nails were removed? Thanks
@@MTNurse because when they nail the pallets together they use a nail gun and the strips of nails that they put in their nail gun uses wire to hold the nails in strips. So when you pull the nails out 9/10 the small pieces of wire is inside the hole. Use a drill bit the next size up from the size hole you have and when you drill each hole out take a look at what comes out with the sawdust. I was shocked at how much I got from drilling out the nail holes. And even as small as the bits of metal you get it will still chip your planer blades. Lesson I learned the hard way.
@@barryhalstead9299 Oh, thanks for all that information. So, if you have to go back and drill out all those holes, is it really any faster than just pulling out each nail by hand? Thanks
A pallet buster is cheap, and makes it easy.
Your channel embodies everything a youtube woodworking channel should be. Entertaining, informative, inspiring, relaxing and fun. Thank you for pushing past the awkwardness as you say and bringing us what we were missing in the youtube woodworking world.
Man ! Wow 🤩 thank you for these beautiful words my friend , it’s my absolute pleasure and I am happy to have you along for the journey
New look? Man hands, legs and no beanie, I like it, I like it a lot, table looks cool too, well actually I love it, I use pallet wood often, got some nice colours in it and it’s free, thx for showing
Greetings 🇩🇪
lol 😆 thanks brother I appreciate ya Skål 🫡
If you are only pulling 2 to 3 nails per runner per slat they are fairly new pallets, they sometimes have oak and even maple in them. The size of an ordinary pallet slat will vary on the same pallet from 3/8, 1/2 to 3/4, only heavy pallets will all be 3/4 of an inch. Most pallets have been repaired many times with so many nails. I just cut between the runners,not getting many pieces longer than 16 inches. I saw a video that referred to special made nice pallets, new easy to pull apart for videos. Pallet wood is a challenge to use.
That table is gorgeous. I really like the look of those legs.
I really wanted to get into building stuff with pallets because I have a source to get them free. after spending a few days ripping stuff apart, I looked into getting things to speed up the process (pallet buster, and the pneumatic nail remover). I ended up just giving up on pallets all together not only because of the extra labor that goes into preparing your wood, but a few people brought up a great point that I hadn't considered. You take a risk of damaging your saw, planer, and other tools with metal that may be hiding in them. More importantly, you have no idea what chemical(s) or other toxic things may have come in contact with or soaked into the wood.
I've been much happier using fence pickets. They're still relatively inexpensive to use and require much less work to use them. end pricing ends up being the same. More for materials & less for labor, or less for materials & more for labor.
Indeed, thanks for the tips
Thanks for the straight edge tip 👍
Awesome looking table
I've been working with pallets for years its a great source of wood and you can actually get free hard woods out of them, but a bit of advice, if your going to plain or cut anywhere near a nail hole get a hand held metal detector and scan the board. The reason is the nails they use are coil nails and the wire that runs through the coil gets stuck in the wood. Trust me I screwed up a brand new set of DeWalt plainer blades on a oak pallet board.
Thanks for the tips brother 🫡
Great project again. Thank you.
You need the air locker gun pneumatic detailer. That thing is awesome.
There are a lot of pallets that have some beautiful grain in them. Up until November everything I had made had been out of pallets. It's a whole lot of work though. Always few hours to break down 4 or 5 pallets. Sometimes I can get the board off without breaking but most of the time not. It's all about how slow you feel like going. That table is beautiful though.
Thank you sir !
OMG- you got me with the hot sauce!!! 🤣🤣🤣 I love this episode! Your beautiful wife made a guest appearance, and so did the geese! I think they loved it, too! 💖
(And you’re right about pallet wood- sometimes you get beautiful wood grain!)
Well thanks so much. I’m hoping to drop this new video I’ve been working on tomorrow , this one here is old footage , but figured I’d shoot it out in the YT universe anyways
The table looks great. I'm sure you've figured out that it would be easier to just cut the ends off of the pallet with a circular saw, then you only have to disassemble the center support. "What kind of man keeps hot sauce in his wood shop?" One with good taste!
Hey Thanks my friend
That came out very nice!
Hot sauce to keep it spicy in the shop. LoL! Louisiana Garlic Lovers Hot Sauce is my new favorite. I keep it at my desk where I edit my videos.
Damn strait brother
Great build Daniel! That turned out really pretty! And as always, a fun, yet informative video! I always get a chuckle when you use wood other than your favorite hardwoods. Your are our wood hero!
Thanks so much ‘ you’re so awesome !
I just looked at some pallets this morning. I want to make the wine rack you showed earlier.
Hell yeah !
Absolutely beautiful work brother …. That’s what I’m talking about 🇺🇸🏆👍👍
Thank you brother
Thank you for using the my wood supplier. As you know not all of us use walnut and outer hard woods.
See you in the next video
lol my pleasure brother
Joined when you had 112K subscribers - good job Mister!
Skål 🍻 thank you
I have about 8 pallets sitting in my front yard. I've been thinking about what I'm gonna do with them. I really like this idea, and thinking of ways to spin it to make it my own! To make it easier (I'm 70, so always thinking how to make it easier! LOL) I'm going to cut it along the edges, then all I have to worry about are the nails in the center! I think I want to make the legs out of the three rails, and going to come up with something unusual and maybe quirky! Anyway, thanks for the inspiration, Daniel!!!
Love it Daniel
Thanks
I realy liked the simplicity of using a piece of plywood to joint your boards. Didnt require building some crazy sled, clamps etc. Simple, efficient, and the table looks great! Nice work!
Thank you my friend
Hey I have not seen anybody else’s post so Daniel I take my circular saw and I saw off board I figured I take that amount off each board anyway.
I love using pallets you get to play with all kinds of wood with all kinds of colors. But it's alot of work to clean up the wood. I play this game every weekend. I'm too poor to afford to buy wood.
lol I’m with ya
Daniel, that is really, really pretty! And, "what kind of man has hot sauce in his shop?" MY kind of man. LOL. I am a chicken wing nut. lol. LOVE my Franks :-p
Hahaha 😂 thanks Sheela!
Great build. I noticed that was an adalottaglue in this one. Thanks Danial.
Hahahaha thanks man
Awesome brother!
Thank you
Absolutely love it good job
Skål 🫡 thank you bro
Niiiiiiiice! Gotta pallet project drawn up as well sir.
Hell yeah I can’t wait to see it ! I’ll have your box shipped out by end of next week fyi
The music was perfect. At the moment, I build exclusively reclaimed lumber from shipping crates, and pallets of all shapes and sizes, from a variety of soft and hard woods(hickory and white oak.) You have get hard woods broken down fairly quickly or they'll split so badly, they're difficult to salvage.
Indeed , thank you for tuning in and leaving feedback
Guess I'm going for a tired comment months later, your family time ( videos ,) really do last in the spirit, I know @10:45 you didn't say matt but I'm a little deaf and I seen the geese, I mention before so I'm marty mcfly cuz even tour geese love me haha
lol at 10:45 I said hey babe. As in my wife .
@Bearded-Viking-WoodWorks Dude... don't take this from me!!! Haha yeah I know it just made me laugh, I have a little hard of hearing and full disclosure I had a couple of beers as well, I've been doing night shift early mornings and 7 days a week I was buggered, I haven't even been able to join a live for nearly a week I'm getting withdrawals, I miss the family
GREAT video !!!! this is why i use pallet wood in most of my projects its free and most of the time it looks AMAZING when finished. Good Job Dan !!!!!
Thanks Ozzy !
Beautiful work brotha. I may take a stab at making those legs from some 2x’s. It’s an interesting design. And the top was flawless!
Yeah if it were up to me I would’ve done wood but it’s for the daughter and those are the legs she wanted and you know what daughter wants daughter gets. 😉
I love all of your videos! That being said, I love when you venture into the pallet wood projects. This is something anyone can get in to with a little effort! Thanks Daniel!
Indeed my friend , thank you
What an absolutely Gorgeous table Daniel!!!
Thank you so much
That second method of jointing your boards is way better and more versatile. It works really well when you have really crooked boards.
Indeed
I've been hesitant to use pallet wood, mostly because I've seen how they go up in a bonfire. I've got an idea now though and am going to move past that worry.
Hell yeah brother ! Can’t wait to see
Hey brother 2nd comment of the day on a different video haha, Last time i said i found a trick to help get nails out and i used a drill bit a little bigger then the nail and it made a world of difference, Well working with some pallet wood i bought a 20 dollar roatary tool and it has a cutting head, I just cut the nail sharp end right to the wood then use a spring nail punch not sure if you seen them, but no hammer and 2 second job, but use the nail punch to hit the nail out, use a hammer to get straggerlers easy job.
Hey man thanks for the tip man
I built a bench with the same legs a week ago. Turned out fantastic! I really like the look of your table!
Thanks brother
Making it look so easy with the edits, but thanks for being genuine as always on the lenghty process!
Indeed Vicky !
Awesome video bro! With the price of wood nowadays, think I'm gonna go hunting for some pallets! Upcycling sells too 👍
It is time consuming depending on the type of nail they use but there is some beauty in pallet woods
Nice one. Even the geese were in awe! LOL
🤣 thank you Richar
great video easy to watch and listen to and a fantastic project again Viking
Thanks 🙏
nice work
Thank you
Did you name one of your avian friends Lucy? That coffee table looks nice. I really look how the grain looks on that portion of the bottom you chamfered. I think you should do a pallet wood tenegrity end table. I kind of think that would fit with how modern the legs are on this table.
Hey thanks for the feedback , I think I might do that ! 😉
Up cycling is the best! Beauty comes in all shapes and sizes. Thanks for always keeping it real D! I'll have to show you and Mrs Viking how we make real wings from Buffalo NY someday 🔥😋🔥
lol 😂 I may just have to try it Kat
Taking the nails outa pallets sucks bro.
Keep being you brother
lol 😂
Yeah, I scored a pallet honey hole a couple years ago and brought home load after load. THEN I found out what a pain in the ass it was to take them sumbitches apart. Long story short, I still have several INTACT pallets still in my basement. 😑🤣
🤣 love this comment! So relatable
I love hot sauce on most everything. My favorite is Cholula, Texas Pete, and Frank's. You should try some Datil pepper sauce. That sht is petty good in a lot of applications.
Damn I might have to try that.
This is just as awesome as first time a watched it. Great video brother. 🏴🤘👍
Very nice
I would only use pallet wood if you have a metal detector. When I used to use pallet wood, I put a knick in my jointer, and I have not used it since. It is good wood, but it can be tricky. It was a staple leg that got me.
Yep 👍
Jesper is watching 😮
Huh. ?
@@Bearded-Viking-WoodWorks just sayin he’s the pallet dude
No live tonight???
Daniel…Wow I love this !!! Who would have thought it would have so much beautiful grain and figure ! What kind of wood do you think it is? Kinda looks like acacia??
Acasia
That was more than adabaglue, hehe
Just a bit 🤣
I am so surprised that you didn't make your own legs for this table. I know you could have looked at the picture of those and made them out of wood. I KNOW you could!! I have faith in you!!!
And yes I absolutely love it too!!
Yep , but my daughter wanted those legs as it was table for her so. What daughter wants daughter gets. 😉
I made a coffee table out of pallet board and it’s my man cave.
Nice ! 👍 did you film it. I’d love to see something like that
I was looking to see if I have made the video of but my recording skills is not there yet
@@KennyCreatesWoodwork all good brother , I totally understand , it’s been awesome watching you and can’t wait to see what your future will bring
They make a tool that will shoot those nails out and save a LOT of time and they are not expensive
Skal 🫡
⭐️🇺🇸⭐️🇺🇸⭐️🇺🇸⭐️🇺🇸⭐️
I need a rack to hang my hammers on, various sizes, willing to share some ideas?
Hell yeah I’m willing ! I’ll do a video
Where do you find the clamps for your jig mate?
Amazon brother
Haha all I use is pallet. I am a little confused though. I do t have a jointer or a plainer so forgive my ignorance. I thought a jointer was so you can joint two pieces of wood together. So y did u pass the flat side over the jointer then pass it through the plainer? Also what kinda clamps you use to clamp down the wood to the plywood with the straight edge?
So the jointer flattens the edges and face to make a perfect 90° then you pass the piece through the planer to make the other face parallel to the jointed face and run the un jointed edge through the table saw to then get that edge parallel to the jointed edge , hope that helps clear it up for you , they are table clamps
@@Bearded-Viking-WoodWorks kinda it does thank you
Another great video! Where did you get the legs?
Amazon , and thank you
Was that all cedar?
Acasia