Renault Trafic, Opel Vivaro, Nissan Primastar - Changing the V-Belt

Sdílet
Vložit
  • čas přidán 19. 03. 2020
  • In this video I loosen the V-Belt to change either it self or components driven by it.
    Attention: This video is only meant to be an assistance and is not an instruction.
    I am not responsible for any damage to the vehicle or for injuries.
  • Auta a dopravní prostředky

Komentáře • 56

  • @garagen-schrauber
    @garagen-schrauber  Před rokem +3

    Don´t forget to like and subscribe as it helps this channel a lot, thank you! :)

  • @1650bullet
    @1650bullet Před 3 měsíci

    I just purchased a Renault trafic, and it needs a new drive belt. This was very helpful in showing me how to renew it.
    Many thanks 😊

    • @garagen-schrauber
      @garagen-schrauber  Před 3 měsíci

      Thanks a lot for the great feedback! :) Be sure to subscribe so that you don´t miss future videos on the Renault Trafic! And if you have any more questions, let me know :)

  • @kieronlatham3140
    @kieronlatham3140 Před 2 lety +1

    Great video. Thank you.

  • @robertoskarzynski
    @robertoskarzynski Před 5 měsíci

    Thank you for this. I was getting ready for a nightmare with taking the whole front off

    • @garagen-schrauber
      @garagen-schrauber  Před 5 měsíci

      I´m glad my video helped and saved you a lot of work and time, thanks for the positive feedback :) if you haven´t allready, consider subscribing 👍🏻

  • @leeryan1969
    @leeryan1969 Před 3 lety +3

    You made that look easy!

  • @arturpapiernik700
    @arturpapiernik700 Před 6 měsíci +1

    Super film 🎥
    Thank you 😊

  • @apolloapollo5553
    @apolloapollo5553 Před 3 měsíci

    Nagyon köszönöm a te segitségeddel sikerült kicserélni a szervo szivattyút.

    • @garagen-schrauber
      @garagen-schrauber  Před 3 měsíci

      Köszönöm szépen, örülök, hogy segített a videó :)

  • @stevejohnson1797
    @stevejohnson1797 Před 3 lety +1

    Great thank you. I will atempt mine with confidance now..

  • @crpth1
    @crpth1 Před 4 lety +16

    Warning DO NOT place the jack and/or jack stand on that area of the body work (sill)!
    It's made of very thin sheet metal, not in any form, shape or intention made to support the weight of the vehicle. In case of failure YOUR LIVE can be in danger and the vehicle will surely be damaged. In either case the video already show a damaged sill precisely from a poor location of the lifting gear! Place the jack and /or jack stand under structural elements, i.e. under the van!
    FYI In this case, the OEM location for the jack is a broad flat rectangular area. Just inside from where the jack stand is placed. Easily seen when kneeling beside the vehicle. Identical area is placed on the back for the same.
    Also when using a bottle jack(s) use a broad flat plate against the thin round face of the jack screw. To distribute and spread the weight.
    Tip: An old brake pad work perfectly and it's free of charge! ;-)

  • @user-hu3uh5fn9s
    @user-hu3uh5fn9s Před 2 lety +2

    Дякую за допомогу.

  • @bakeredwards
    @bakeredwards Před 3 lety +2

    Thank you.

  • @tomsurrey2252
    @tomsurrey2252 Před 9 měsíci +1

    I did my sons Trafic, from underneath... simple, but fiddley!

  • @andreawood6312
    @andreawood6312 Před rokem

    Well done thanks for the video. Well done you 😊

    • @garagen-schrauber
      @garagen-schrauber  Před 11 měsíci

      Thank you so much for your lovely feedback! Made me really happy to read :)

  • @r314
    @r314 Před 3 lety +1

    On my 2005 Vivaro 1.9 TDI it looks a bit different, belt tensioner is a bit upper and don't have such good access to that.

  • @pedrolg
    @pedrolg Před 3 lety +1

    Excellent.

  • @agrazaj223
    @agrazaj223 Před 3 lety +3

    Dzięki

  • @aston0708
    @aston0708 Před 3 lety +1

    good video vielen danke

  • @JacksonCabalerro
    @JacksonCabalerro Před 2 lety +1

    Hello do you know where are purge screws on laguna 3 2.0 DCI 150CV, can you help me ?

  • @daposlovakiask8796
    @daposlovakiask8796 Před 2 lety +1

    Danke👍

  • @frednetherlands887
    @frednetherlands887 Před 3 lety

    Danke!

  • @mustafakaracalar3953
    @mustafakaracalar3953 Před 6 měsíci +1

    Thank you friend turkey write see you

  • @alexandrudeak4454
    @alexandrudeak4454 Před rokem +1

    I need help to change power steering oil.

  • @daletinsley2954
    @daletinsley2954 Před 3 měsíci

    I don't know which hole the Allen key slotted into as there is not one on my Renault trafic. Tried several times and the tensioner will not lock into place.

  • @davidmolloy6596
    @davidmolloy6596 Před rokem

    Danke sehr,veil danke aus Ireland

  • @michaelohagan2345
    @michaelohagan2345 Před 4 lety

    Sweet

  • @ClankyRochet
    @ClankyRochet Před 3 lety +1

    I have 2008 Nissan primastar. Does it have chain or belt?

    • @crpth1
      @crpth1 Před 3 lety

      The 2.0 DCI has a timing chain. The older 1.9DCI has a timing belt.
      On the same sequence the serpentine belt for the 2.0 is a 7NPK... and the 1.9 is a 6NPK... Lengths vary with the equipment, with or without AC.

  • @FarringtonDS
    @FarringtonDS Před 2 lety

    Appreciate the video - now change your waterpump and my life is complete! :0)

  • @nataliaambruszkiewicz3490

    Which size do you have ? I ask because i buy all size &dont fit 😢

    • @garagen-schrauber
      @garagen-schrauber  Před 11 měsíci

      I don´t know if I´m comfortable sharing *my size* here on CZcams 🤔 Ah, oh you mean the size of the V-Belt?🤣
      There is a difference depending on whether the car has air conditioning or not. It's been a few years, so I don't remember exactly, but for my car with air conditioning, it should be 2000mm with 7 ribs if I´m not mistaken

  • @itevensystems8860
    @itevensystems8860 Před rokem +1

    Hi. What year and engine size van is it?

  • @0003rc
    @0003rc Před 2 lety +2

    Would this process be identical on a renault espace from 1999, engine 2.0 TD?

    • @garagen-schrauber
      @garagen-schrauber  Před 2 lety +1

      Hi Cliff, I haven't worked on this vehicle yet so I can't tell you for sure. In this thread here
      www.espace-freunde.net/forum/index.php/t/46724/
      is is a discussion about putting on the belt, there are also some pictures with right and wrong. Maybe this helps you along.
      In general, I can give you the advice to look for the fitting belt with your engine code online, often there are also drawings of how the belt must be mounted. Here is an example: www.google.com/aclk?sa=l&ai=DChcSEwjCwuezn8_zAhWXt3cKHVkWDX8YABAtGgJlZg&sig=AOD64_26jmu2VWwMQNXzBB9GSrZd_4j_dg&adurl&ctype=5&ved=2ahUKEwihytazn8_zAhVEyKQKHXMhCl0Quxd6BQgBEIID

    • @0003rc
      @0003rc Před 2 lety

      @@garagen-schrauber Thank you

  • @downavenueway8115
    @downavenueway8115 Před 3 lety

    How long does changing the belt typically take
    ⭐⭐⭐⭐⭐
    5 star video

    • @garagen-schrauber
      @garagen-schrauber  Před 3 lety +2

      All in all about 2-3h, it depends on how good the wheel comes off, how fast you can find the hole to lock the tensioner and how much experience you have and so on. And you really shouldn't be in a rush because the new belt has to sit perfectly on the pulleys.
      Thank you for your 5 stars :)

    • @downavenueway8115
      @downavenueway8115 Před 3 lety

      @@garagen-schrauber 👍

    • @lieberfreialsgleich
      @lieberfreialsgleich Před 3 lety

      1.9, 2.0, or 2.5?

    • @garagen-schrauber
      @garagen-schrauber  Před 3 lety

      @@lieberfreialsgleich Du meinst welcher Motor das ist? 2.0

    • @michaellack5139
      @michaellack5139 Před 7 měsíci +1

      @@garagen-schrauberhi you seem to know your stuff…I have a Renault trafic 1.9 dci 100 2005 18 years old…..it has air conditioning and the pulleys etc are 6 grooves but the power steering pump is 5 grooves and has got a 5 groove belt……I have driven it since I got it two and half years ago…..never had a problem……took to a mechanic (he said he was) and had timing belt and water pump fitted only. Nothing else he refitted the old auxiliary belt back on and when I collected it it had developed a squeal on aux belt constantly day in day out all day for 11 months….it finally frayed on one groove….left hand side if looking into engine…wrapped round crank pulley and knackered the engine…..your thoughts please regards

  • @yvettemorel5928
    @yvettemorel5928 Před 2 lety

    Déposer une courroie d'accessoire de Nissan cabstar

  • @georgeportsmouth7131
    @georgeportsmouth7131 Před rokem

    If belt snap is your engine gone