I know that I'm a decade late to this video but if your still taking comments I want to thank you for this video. I bought a Gas Gas TXT 300 trials bike and I'm 59 years old, I'm in the process of recovering from throat cancer surgery. I got a great deal on the bike and although I can't ride it yet I'm super excited to have it for when I can. Hopefully before winter sets in I can get her broken in. So many people told me to install a domino slow action throttle so I ordered it from The Tryals Shop. No instructions 😮 I really didn't have a clue what I was doing I never disassembled a throttle tube. You made it go very easily. This throttle tube takes way more twist than the factory one and I'm hoping it tames the 300 down just a bit. Thanks and I hope your doing well
This is the vid I was looking for. I drive a cheap scooter that had throttle cables snap twice. Fortunately I was in pushing distance of home and the local mechanic but often wondered how I would access it for an emergency road repair if I were in the middle of nowhere. Thank you.
Thx a lot, real good video explains it real well, only question I have is i find my bar to have some "scratches" do you sand those down or do I need to change the bar?
How do you get more slack on the cable for it to reach the throttle tube. Im having to use needle nose pliers to pull in out and its barely reaching the tube.
So there are no bearings between the throttle and the handlebar? Seems like there would be too much friction. Also, what force is making the throttle snap closed? Is it a spring at the bottom end of the throttle cable?
On 2 strokes - when you twist the throttle the slide in the carburetor slides up, when you let go, the slide falls causing the throttle to snap close. Underneath the carb cap there is the end of the throttle cable wrapped in a spring which is connected to the slide. 4 strokes - they have two cables - one is the return.
+Tim Irvine He actually says "aluminum billet end cap", or that's how I heard it. The company sponsors per the number of times you mention the brand of a particular part.
a question... how do you reverse the gas throttle so instead of rotating towards you, you rotate the throttle away... and is there a name for that? cant find any parts etc anywhere =) thank you for help...
dcrypter87 only if your grip is wrong. Always keep your wrist lower than the bar. So when your wrist straightens up in an emergency, you roll off throttle. Wheelies happen when people have their wrists higher than the bar - they tense up hard, and roll on the throttle hard haha. :)
I removed dozens of Grips but I can't get these damn Honda Gel grips off. I shot wd40. Air compressor. Had my wife hold on side with her 2 good teeth. Nothing worked. Don't buy them if planning on replacing them unless u guys know a Trick !!
I know that I'm a decade late to this video but if your still taking comments I want to thank you for this video. I bought a Gas Gas TXT 300 trials bike and I'm 59 years old, I'm in the process of recovering from throat cancer surgery. I got a great deal on the bike and although I can't ride it yet I'm super excited to have it for when I can. Hopefully before winter sets in I can get her broken in. So many people told me to install a domino slow action throttle so I ordered it from The Tryals Shop. No instructions 😮 I really didn't have a clue what I was doing I never disassembled a throttle tube. You made it go very easily. This throttle tube takes way more twist than the factory one and I'm hoping it tames the 300 down just a bit. Thanks and I hope your doing well
This is the vid I was looking for. I drive a cheap scooter that had throttle cables snap twice. Fortunately I was in pushing distance of home and the local mechanic but often wondered how I would access it for an emergency road repair if I were in the middle of nowhere. Thank you.
This guy's voice is very soothing and easy to listen to.
A good look into how the system works at the top end. Much appreciated! Helped a lot!!!
All install videos should be this perfect.
Seriously.
CheerX9087 exactly
Looking at switching handle bars... Really helped relieve some stress about the mechanics of the throttle! Thanks!
thank you for doing and sharing this video, helps a lot! I have a dt-1
Thx a lot, real good video explains it real well, only question I have is i find my bar to have some "scratches" do you sand those down or do I need to change the bar?
Thank you for the idea.
Great video. Thank you.
awesome video...thanks so much
Will the throttle tamer work on a 2018 YZ125? It only show up to a 2017. Thanks!
So helpful thank you
i have a problem to unscrew the handle bar grip?..any recomendation?coz it so tight to unscrew
very helpful, thank you
Great Job thank you Brotha!!!!!
hi, this looks like a metal housing throttle, i can only find the plastic ones. can you tell me where you purchased this one?
nice video sir very well thanks
How do you get more slack on the cable for it to reach the throttle tube. Im having to use needle nose pliers to pull in out and its barely reaching the tube.
thanks dude!
Will this work with the same installation process as with a moped?
does anyone know if any company makes or can make a left hand twist throttle assembly.
will this also work on a mini chopper
thank you so much man you just save me from $60 to $90 hell yeah way to go man
im so greatfull to you and my girl says thank you as well jajaja
My tw200 has two cables, and when I put them back in the slots they dont activate the throttle anymore. Everythings put back together correctly
So there are no bearings between the throttle and the handlebar? Seems like there would be too much friction. Also, what force is making the throttle snap closed? Is it a spring at the bottom end of the throttle cable?
On 2 strokes - when you twist the throttle the slide in the carburetor slides up, when you let go, the slide falls causing the throttle to snap close. Underneath the carb cap there is the end of the throttle cable wrapped in a spring which is connected to the slide.
4 strokes - they have two cables - one is the return.
90% of the stuff mentioned in this video is not on my Puch, darn.
Thank's !
Billet Aluminium End Cap - How many times did he say that? lol
+Tim Irvine He actually says "aluminum billet end cap", or that's how I heard it. The company sponsors per the number of times you mention the brand of a particular part.
Billet Aluminium End Cap
my throttle twists to far forward and my engine dies,what do i need to do to adjust the cables
idle adjustment screw on your carb maybe?
a question... how do you reverse the gas throttle so instead of rotating towards you, you rotate the throttle away... and is there a name for that? cant find any parts etc anywhere =) thank you for help...
That would be dangerous... you want to roll off the throttle, not roll onto it (in emergency)...
well what i heard and whats happened to my self when you loose control of the bike you tend to pull it even more and then ur doing wheelies =D
dcrypter87 only if your grip is wrong. Always keep your wrist lower than the bar. So when your wrist straightens up in an emergency, you roll off throttle.
Wheelies happen when people have their wrists higher than the bar - they tense up hard, and roll on the throttle hard haha.
:)
dcrypter87..?
i bought a cheap 10 dollar throttle tube from motorcyclesuperstore for my 02 yz 125 i hope it works
2019??
@adoniscomplex i always lube it..
I removed dozens of Grips but I can't get these damn Honda Gel grips off. I shot wd40. Air compressor. Had my wife hold on side with her 2 good teeth. Nothing worked. Don't buy them if planning on replacing them unless u guys know a Trick !!
+Silk Boxing maybe use a knife? just a suggestion
LOOOOL
your voice is like donald trump...😂😂😂
Asyraf Abdul Malik idiot
Asyraf Abdul Malik “It’s going to be Great”
Donald trump hahahahah pozdrawiam
My retarded moped had a plastic housing, died within half a year
This doesn't help, when you want to replace the cable... You already have enough tention on the cable, because it's the same cable!
yhu dnt even show were the throttle rest wenn yhu put it on soo take this off it iz worth nothing this video