Renault Scenic 3 Battery Replacement (AGM) | Promo Code In Description
Vložit
- čas přidán 1. 07. 2024
- Hey guys today we will be swapping out the AGM battery on this Renault Scenic MK3. The old one has lasted 9+ years but a new stop start fault means its time to swap it out before winter.
If you use my Promo Code I will earn a commission, this does not affect the price you pay. Thankyou for supporting SocketsAndSideburns.
I'm excited to be able to offer you 5% off all car batteries at Tayna Batteries using my Promo Code SIDEBURNS5 at checkout.
Link to Tayna Batteries website
www.tayna.co.uk/
Link to Varta battery used in video
www.tayna.co.uk/car-batteries...
Battery Post Cleaner
amzn.to/3DPeVFD
If you click on some of the links I provide in the description and decide to make a purchase I may earn a small commission. Using these links will not increase the price you pay.
As an Amazon Associate I earn from qualifying purchases.
Thankyou for supporting SocketsAndSideburns. - Auta a dopravní prostředky
Thanks for a great video. As others have said, you've made everything extremely clear, both in terms of sensible and relevant camera angles and also really helpful commentary ... both of which are sadly all too often lacking in such videos! Extra insights into how to manage specific quirks of each fitting, which tools might work best in those awkward angles etc. are all extremely helpful. When so many manufacturers seem to be making otherwise simple tasks (such as changing a battery) as difficult and inaccessible as possible these days (🤑🤑!) videos like this are fab ... Thank you!
I swapped my battery today following this. It's a great, clear set of instructions. I neglected to unlock the car using the keycard button initially, so the alarm went off as soon as I disconnected the negative terminal. But I got there in the end. Thanks.
So helpful, I followed the instructions, changed the battery by myself and saved 200€ thank you.
Merci pour vos explications . J'ai remplacé ma batterie en 40 minutes sans efforts grâce à vos explications . Thank you very much !
This video is fantastic. You have explained the whole process brilliantly.
Such a good job , Nice tuto Clear and Visual explanations congratulation and thanks .
I've hardly ever found a mechanical tuto like this !
Thankyou! I was struggling to get the battery holder bar off, came across your video and was able to complete the process 😊 brilliantly explained
This video is actually really helpful. Somebody told me I have to visit Renault to get my battery changed. Thanks to this tutorial I will save at least 200€.
THANK YOU!
PS: My Scenic 3 1.6 dCi battery is 10 years old. Seems like these batteries last an absurd amount of time.
Good video, went to halfords to buy battery, then they said they need to fit it. As need to electronically tell car it has new battery. Done all that, gentlemen said he does not need to
Electronically tell the car. We'll he did as car keeps asking me does it have a new battery. Great support from watching this video. And managed to sort it out my self. Thank you very much.
Thanks, very good tutorial, I managed to avoid unscrewing difficult screw on the + part by choosing the one on top of the connector !
Thank you for these very clear instructions. Even I managed to replace my battery successfully. 🙂
Fantastic video with all explanation needed! Brilliant job!
Gracias por la explicación tan completa...es una alegría que cuelgen este tipo de vídeos...un 10 .
Excellent video! Keep up the good work for us struggling motorists 😊
Super video. Very methodical. I just purchased a Scenic 3 a month past. Hopefully not to must will go wrong soon. Not a bad little car. Drove from Grays in Essex to Cairnryan Scotland, ferry to NI then home. Drove not too badly with at the moment no strange noises. Many thanks for the tutorial. (Antrim)
Thanks for an excellent, clear and well presented video. Very informative, showing all the little bits and tricks that others gloss over. 🌟🌟🌟🌟🌟
Thanks very much :)
Excellent presentation. I just successfully finished replacing my first battery through your guidance. Thanks
Well done! Hopefully you saved some money.
The most clear, how to do it car vid I have seen on CZcams and Ive seen a few. Highly intelligent , conscientious. Glad he does the bitch scenic for me.
Thanks matey helped me out never done a battery change before
Great explanation and beat me to it re the battery outlasting the Renault, awful cars to fix. My battery coming up to 9 years showed low battery recharge today when the headlights decided to stay on with engine off for about 20mins. 12.58V DC engine off, 14V DC engine on. Probably need to replace.
Great guide, Thanks a lot for your effort!
Excellent Video, Thank You.
Thank you very much for your help and time!
Nice tidy installation! I use AGM batteries even if my car doesn't have start-stop function for it's better performance and not giving of gases that will cause corrosion. It costs a bit more but if you love your car it's worth it.
Definitely worth it. Just the price tag puts most people off.
This is the best tutorial video I have seen for years! Well worth watching, crystal clear instructions and pointing out things and procedures to look out for.(like the advice about the deep 10 m/m socket needed for the positive terminal) - if your like me - I normally come across these awkward to reach nuts and then spend half an hour hunting for the correct tool👿 (which delays the job.) - Forewarned is forearmed.
one minor criticism(no way intended to be rude) - is that the focus on the camera at times was not great(but as a budding camcorder enthusiast - I know how difficult getting the correct focus all of the time can be!)
Will try and purchase a battery terminal cleaning tool as well!
Thankyou.
I do try to keep focus but it can be difficult while also trying to actually do the job. Its part of the reason I always use two cameras.
Excellente vidéo qui reste très concrète..merci beaucoup.
Thank you man.... you just saved me 35€
Good video, I just changed my battery this morning as I was also getting the start stop fault, 9 years old same as yours. 👍
Dont need to code brother?
Plug and play?
@@OCANALDOMARKITO Yes it’s just plug and play
@Paulnutter7675 Hello Paul, before you change battery, car show " check start and stop " message? . Thanks.
Great material! Cheers
Very well explained. Thanks.
Great informative video which made me sadder to realise that the previous servicing(no names no pack drill) had been performed by cowboys.The ECU cover was completely missing as is the battery box extension that clips into the back of the battery box. What a shame that main dealers have so little pride in their work.
It happens unfortunately. Best to do things yourself if you are able.
Excellent !! leçon de mécanique et d'anglais 😉
Very helpful. Thank you
Hello, please, can the plastic cover for the battery on the 1.6 dci engine be installed without removing those frames and parts from under the windshield? I tried but that little leg under the lid won't let me. Thank you
Thank you 🎉🎉
Hallo. from algeria north africa thenk you for vedeo
Very good video, I plan to replace the battery on the Renault Talisman 2016, do you think there will be the same message for the battery when I install it?
I'm afraid I don't know and I couldn't find any information on it. You could try and hope a message comes up. If not you would have to reset the BMS using a scanner.
Czy po odlaczeniu akumulatora na kilka dni można rozkalibrować wszystkie układy w scenic a potem będzie wariował tracił pamięć i przechodził w tryb serwis a przy tym przestanie odpalać?
Do more on this car ❤
excelente video,merci
Thanks much for the video, I've changed the battery (the same as yours) following your clear instructions. Once done, I haven't been asked if the battery is a new one, and still have the stop start fault. Any thought ?
Disconnecting the battery should always trigger this message, did you cycle through the messages as sometimes it is hidden by other messages if you have other faults? Did you use a memory saver when changing the battery? If you did then the car wont realise the battery has been changed.
Also there is a fuse for the BCM on the back of the battery tray 5amp I think that can blow. Its hidden behind a rubber cover.
@@SocketsAndSideburns thanks much for your help, I'm gonna check that fuse. Have a nice day !
I have same problem problem problem is fine better design coming in the 20 Min the 20 minute so with a stop I don't know how to close this
Vielen Dank ✌🏽👍🏼
Very well told could you tell me what is the name of the traffic below front window screen and I there any video showing it being removed thanks
Do you mean the scuttle panels? If so then no I haven't made a video for those.
@@SocketsAndSideburns would you have a picture of how it looks fitted
excellent tutorial even for a noddy like me....i note when you were flicking through your messages you had a check parking brake message. my sally gets this from time to time and recently seems the rear brakes are sticking. any thoughts what could be wrong?
With mine it was a seized caliper. Didn't have time to do a video for it I'm afraid.
@@SocketsAndSideburns thanks for the reply mate....my son in law changed the pads on it today seemed fine for 10 miles or so then started to stick. stinking of brake pads and very hot so im guessing a sticking caliper? hes confident he can change it but unsure if it will need calibrating on a computer after...any idea? sorry to be a pain
@@stuandkids You should have needed a diag tool to handle the pad change that should be able to set it into maintenance mode to change the caliper too.
Make sure to check the slider pins first though.
He used two wires and a spare battery trick to release the brakes. He's just concerned that a new caliper might need to be calibrated once fitted
Hi mate can you post a video replacing the Pollen filter please?
I'll take a look next time I have the Scenic in.
Hi mate have you got a link for the tool you used to clean the terminals cheers
The one I'm using in the video is made by lisle. I got it in the USA it is very overpriced in UK. I've put a link in video description to a much cheaper one that is the same type of brush.
@@SocketsAndSideburns my guy nice one 🤜🏼🤛🏻 and ordered lol
Is it same principle for renault clio mk4 2013
The job is different, I believe the clamp is the same as on the Clio 2. As for the BMS reset I'm afraid I don't know.
Excellent video ,have Clio 4 stop start, do I have to disconnect battery from car to top up charge
I have not previously but I was using a smart charger. If you want to be safe best to disconnect.
@@SocketsAndSideburns huge thanks for your reply, can you tell me if I would require to initiate the battery on reconnection , as an old geezer this new start/stop thingy and battery registration gets me confused, I have use of autel mk 808 scanner, once again huge thanks and regards
I don't believe you have to do anything with the BMS that requires a scan tool but I'm not certain. The Autel MK808 supports BMS reprogramming anyway so you will be fine either way.
@@SocketsAndSideburns huge thanks for this, battery is out and on smart charger, will reconnect at weekend and see what happens, will post results to you And thanks again
@@SocketsAndSideburns fitted AGM battery today, allow I minute or so to initiate, then lights I min, then windows up down, start engine, then steering side to side , YOU WILL REQUIRE 4digit CODE for radio head unit, stop /start back on line , full scan showed no faults, do not hurry procedure and all should be well,. thanks greatly for your interest
I have check parking brake on too.. Changed all brake pads and still same.. Any idea?
I'm afraid you will need a diagnostic tool that can talk to the EPB control unit in order to see what code has been set. I have made a video on replacing the motor if it turns out to be that causing the problem. You can diagnose that issue without a code reader which I explain how to do in the video. You will need one to reset any parking brake faults though.
@@SocketsAndSideburns I have had a code reader on it and it showed no codes to do with the parking brakes.. Very strange
What code reader are you using? A simple OBD2 reader will not communicate with the parking brake computer which is different to the engine computer (ECU). Did you place the rear brakes into maintenance mode before changing the pads?
Thanks helped me a lot today. I changed the battery. And it works fine. But I didn’t get the new battery? message. Is that a problem?
That is strange. Did you use a memory saver while you swapped the battery over?
@@SocketsAndSideburnsno dont have something like that
@@SocketsAndSideburnsand now i have the message check stop and start hmm and stop and start dont work in 6 degress C , should it work? Or only if engine is in full working temperature?
I would suggest disconnecting the battery again and leaving it for a few hours. Reconnect and see if you get the new battery message. It should come up after a battery disconnection.
@@SocketsAndSideburns ok thanks you think just taking the minus cable off is enough?
When I start my engine exactly the time not coming better resign better resign coming in the 20 minute by passing the 20 minute then battery sign coming with the stop sign
There is likely a fault with the charging system or the battery itself. The fault will not go away unless you fix the cause.
Check charging and no parasitic draw. Then if battery is bad, replace.
My car 2018 has a efb battery in it. Got replaced with an agm battery worked fine for a while now the engine warning light came on... been checked no fault codes apart from low power to the gearbox... alternator is OK... now stop start feature stopped working.
Thank you for the video. More awkward bullshit design from Renault
🙏🙏🙏🙏🙏🙏
I m stuck in morocco and i need to find an agm battery 🥶🥶🥶
Bloody French, have to make everything so difficult... 🤦♂️