Video

Would you care to tell where's the Camshaft position Sensor located, my OBD2 Scanner show that I need to change it, I have exactly the same car but I can't find it's location.

Maybe a good idea to mention that if you remove the rubber seals from the ends of the spark plug leads for testing the leads, be careful because mine were old and brittle. I broke one on each of two leads but I put the rubber seals back in because the coil pack was working ok at the time. Next time I came to remove it the rubber seals stayed on the spark plugs. Probably best to put the leads back on without the rubber seals if you have to put them back on after breaking them? I know need to find a way to get the rubber seals off the spark plugs!!

do not repeat what this young man did, never put pressure on the flap from the inside, it is enough to clean it with a spray and a penson. God, he put the screwdriver in the flap. omg

Thanks this was super helpful!

*На Рено Флуанс демонтажа същият ли е ?*

Good ☝️

I will leave this comment here in case anyone has similar issues in the future. My radio was having a beeping sound every time it was turned on. It beeps every few seconds for about a minute or 2 and it goes off. I tried everything but nothing worked. I even changed the fuse and nothing. Well, it turned out, that one of the cables (yellow one) was disconnected from the back. I suspect during the recent MOT because it started right after. I had to pull the radio out that's how I noticed the disconnected cable. Anyway, I reconnected the cable, and the beep continued, so I pressed help 6 until it prompted me to enter the code. After entering the code, I helped 6 and the word "other" appeared on the screen, I pressed and held it two more times before I was taken back to BBC 1. This has been doing my head in for the past few days. I'm glad I was able to resolve it, thanks to this video. One more thing. The visual screen was completely blank while this issue was going on. I would only see the clock on displace but not the radio station information.

I don't know if you can help. My radio isn't asking for a code, however, when turned on, it beeps every few seconds for a few minutes and turns off. The same thing would happen again when I turn it back on. I have a 2001 Clio. I can't find any information online about this specific issue.

Step by step, great video. Tnx.

Hi, I saw a lot of videos on your channel, i have a Renault Grand Scenic 3, 1.6 Benzin +LPG (it's a new system)81kW K4M engine code 2009. The coolant level is not decreasing. When driving the car in heavy traffic, the coolant temperature is normal. However, when I enter the highway and the speed exceeds 90 km/h, for example, around 110 km/h, the engine coolant temperature rises immediately, the vehicle's fan kicks in, and the temperature returns to its normal state. I'm afraid to exceed 90 km/h. What could be the cause of this overheating?

hello, I have the same engine, but I have a problem with gasoline getting into the oil

❤😮dkzk

Another sound job it’s nice and easy to follow your step-by-step guide. That’s what I like about your channel. It would be nice if you could do a video on the Renault scenic on how to replace the cabin pollen filter

Good morning I would like to ask if you could recommend a replacement oil for NFJ from the video. Supposedly, the replacement was NFP, but it is no longer available. The vehicle is a Renault Twingo 2 from 2009. The gearbox is JB1525. The engine is marked D4F772, the technical type of the vehicle is CN0A. There are companies that recommend Fuchs Sintofluid 75W80 oil. However, some people on the Internet claim that Total Gear 8 75W80 can be used. I will be grateful for any answer Best regards

if your wipers makes hitting sound, use short one on the side of driver and there will be no sound.

Here because at 145k miles, it’s possibly needing checked on our 8-valve 1.2 production year 2000. Haynes manual says it’s not a scheduled maintenance item. This I can understand, as very often as long as they are ‘loose enough’, no end of tinkering with these makes a darn if a difference to a lot of engines (not talking specialist cars here). It’s a bit hard to know with some of this stuff, three examples being: cam belts, recommended at 70k miles but dare you wait, Haynes says 40k miles intervals; automatic transmissions’ ‘lifelong transmission fluid’ they have said for years don’t change it (terrible advice in most but not all cases); manual gearbox oil definitely can do with changing before 70k miles, it can be the difference between seeming like all synchromesh has gone, and everything working fine. Thanks anyway, take care all. [Edit: the D7F 8-valve engine from y2k, is 0.10mm inlet, and 0.20mm exhaust].

Perfect video, incredibly useful. I'm trying to remove the coil pack from the car, however the T30s hold as hell. I have noticed oily mess on the top of the plugs, is it ok? I'm wondering where the leaks might be from.

Hi iv gotta 2009 renault grand scenic 3 1.5 dci my epb is only workin on one side passenger i bought a new motor an still is not workin is looks like the connector is bad iv had to manually release the one side that is not workin an help would be appreciated

Radio is working but it continuously beeps every after 2-3 seconds, I really need to fix it.

Thanks Man!🎉

Hi, today when I turned on my ignition (same model) there were vibrations in the engine and the engine light on the dash was flashing. Would this be the coil pack?

Thanks matey helped me out never done a battery change before

You are a life saver..It is a pity that I can only give you 1 like. I could have given you a billion of likes.. Many thanks for your free tutorial. I had issue with the battery and alternator. When the mechanics changed both of them, the radio couldn't play any longer. I was without music in the car for over 4 months. After watching your video, it is as easy as teaching a 10 year old child 4+6 or 2x5... God bless you without boundaries. A massive thank you.

Can someone explain to me why shitty Renault needs this shitty radio code in their shitty cars??

Hello there, thanks for this amazing video! I have a D4Ft 1.2 TCe engine. Intercooler and intake pipes full soaked with oil, also going inside the throttle body. Turbo was changed, compression on the rings is good. I will replace this week the valve stem seals. I was thinking of cleaning the rocker cover, is there no valve inside? Just chambers to clean? What would a blocked rocker cover cause? Because I'm having a little of oily white smoke after idling for 30 seconds.

around 3.4L oil used for gearbox

extraordinary explanation about your videos. Thanks a lot. Perfect.

Thank you, brother! It's a very straight-forward and easy to understand. I'm a complete beginner when it comes to car engines. This year I noticed that my Clio's fuel consumption was increased as compared to the previous year. Also, the RPM at idling was over 1000, although it used to be 600-700 RPM at idling. My gas pedal also became very hard (my English is not that good, sorry). I had to press the gas pedal HARD to move the car, otherwise, it would simply "shut down" when I start releasing the clutch pedal. Last month I sent my Clio to a detailed overhaul, and told them about the problem. They changed brake pads and stuff, fuel pump and several other parts, but the problem wasn't solved. When I told them about it few days later, they simply told me "It's because we changed the fuel pump." I came home disappointed. I called my dad, who's a professional truck driver. He said, "It's the throttle valve, it has to be cleaned and they simply didn't bother to do it!" So, I googled about cleaning the throttle valve, and came across your video. I followed your instructions to the letter, including the brand of the throttle cleaner. And I did it, successfully! The problem is now solved, RPM is back to 600-700, gas pedal is now soft as it should be, and the fuel consumption is back to normal as well. Not only that my car had to re-learn the values, but also I had to re-learn to press the gas pedal GENTLY, lol :) And let me tell you: my throttle body was SO DIRTY, it took me a few hours to clean it. The one in your video is not even close to what mine used to look like before I cleaned it. THANK YOU SO MUCH for this video! Officially, you're my hero of the year! Keep up the good work!

thanks bro !

Thanks so much!

perfect now i can fix my own clio

My grandparents can finally listen to some tunes again! thank you!

Is it unusual to have the cylinders numbered in this order, with number 1 closest to the flywheel/transmission and 4 closest to timing belt? The general wisdom online seems to be that it’s usually numbered the other way around, with timing belt side being the “front” of the engine and cylinder numbering starting from there. Is this is a Renault thing, to have it backwards? Or maybe I’m just confused and my lack of mechanical experience is showing.

When rotating the engine, is it very bad to go a tiny bit backwards (counterclockwise) if one overshoots the correct point?

SORRY maybe we are wrong !! ..we thought the rear pistons had to be screwed clockwise back into calliper

Very helpful !thank you so much

I just checked the pcv pipes and they had the mayo. Used a wire to poke the hole in the back of the rocker cover and clean some more. Am I right in thinking if I can't blow air through that hole the pcv system is clogged or is there a one way valve or something?

Hey mate i have AC compressor in the way, so do I need to remove it or is there another way to find the engine number?

Great video, I have sent you a message on Instagram to see if you could help me out regarding my clio mk2 16v and my radiator.

Thanks man, this video has helped me to get a radio in my car after over two years stranded with a non functional radio! Be blessed🙏

Paylaşımların için teşekkürler. Videolarını izleyip kendi aracıma uyguluyorum . Thank you

I removed mines but did not disconnect the battery does that change anything

Hello thanks for the video. I want to ask can bad pcv valve give blue smoke from exhaust and could i just vent it out not connected to the inlet. The engine is the same. Thanks

Absolutely fantastic video. Helped me out massively. Thanks so much you 🌟 very well explained and in detail. Renault Scenic mk3 👍

Took out the radio the security code isn’t there? Can I get it from the Vin number or is there another way?

Thank you so much!

Hi did all that but still runs on 3 cylinders the car has had an engine change that was the same make and model (plug & play) tried 3 different coil packs any help would be grateful

Thank you so so much :)

Hi. Thanks. Is firing order 4 3 2 1 thanks Dan. Same as shown. So if I have p0303 I should check the plug and compression on the second from the left

Hello I have a idling problem with my Renault Clio 1.2 16V 2004 model and from time to time it won't start when I turn the key only the ignition will still go on but won't start. Please help Mr sockets and sideburns please any help will do.