How to use the Behringer MX8000/9000 console - Special Request Part Two

How to use the Behringer MX8000/9000 console - Special Request Part Two
mistake.
later in the video I was calling busses 1 and 2 A , 3 and 4 bus B
Busses 5 and 6 C and Busses 7&8 4. I overthink and miss name things because I am subconsciously thinking about running out time on the camera. Apologies

[@topa1798]

I really need this,thanks Mark 😍🙌🙌🙌

[@patbank05]

Much appreciated 🙏 Mark thank you for taking the time to explain these mixers till the next vlog peace 🎶

[@uptownphotography]

Another video well explained for the recording process and the multiple ways you can route audio and different approaches that could be used with a mixer and outboard gear......

[@slide8570]

I have that same board minus the bridge..nice feature! I run my sub groups out to a patch bay that feeds my DAW interface, my aux sends are routed to external hardware and routed back to the board via mix B and engaging the Flip Switch so I can use the board to mix in the sounds and assign to busses if I choose..or just not assign them to the subs and use them for monitoring. This board is old though..bought it used in the 90's. Got a dead channel and some phantom power issues..but I still use it!

[@kenzii6001]

Hi I've got a question, but how did you connect console to your computer? By 2 outputs on console through 2 inputs in your audio interface?

[@wisdomkiddofunnyvideosandf1511]

please can you do a video explaining mix a and mix b mixing down please

[@beatprocess]

im really confused. does this mixer have direct out?

[@kaiwenwu1947]

Hi is there some magic button that makes the bus section LEDs work on the lower right side. All the bridges work fine. And so do the level sliders " but none of the bus led sections come on. Not a flicker. " Am I doing something wrong. I'm an electronics engineer and I'm stumped". As my 8000 is old but brand new and perfect except for this weird thing. Please tell me it's me doing something wrong lol thanks mate