How to replace a cabin filter? - Skoda Octavia III - The Mechanics by FILTRON

The assembly of the cabin filter in Skoda Octavia III performed step by step by The Mechanics’ professionals.
FILTRON’s K 1311A cabin filter is used in this video. It is a filter with an additional layer of active carbon, which stops harmful gases and unpleasant smells. It is also fine to mount a standard cabin filter K 1311 without the extra layer of active carbon in Skoda Octavia III .
Remember: The replacement of the cabin filter should be carried out by a qualified mechanic.
Check the filter specifications and the complete list of its usage ➡ filtron.eu/K1311A
Find out more about FILTRON brand ➡ filtron.eu

[@romanstepanek3020]

Perfekt

[@janjan1667]

Beware, there is one significant problem!
Since the filter is horizontal and there is dirt on the top, you are not able to pull the filter out so that the dirt does not fall directly into the fan! And there, at best they just rattle, at worst they make a bigger mess. Always when replacing, you need to use a sheet metal jig that slides under the filter before removing it! It can be bought, but of course DIY is sufficient. That's what the debris that gets collected during the change attacks.
It's a hassle, but it's true. I don't know why the designers didn't use a vertical fan like they used to. So watch out for that!

[@martindusil465]

That´s a good point. Thank you! =)

[@arkadiuszsmuniewski9852]

Jak wprowadzasz dane o serwisie do komputera?

[@filip7681]

Profesjonalistom w ASO zajęło to 18 minut (według faktury) ;D

[@ukaszsmagora250]

A

[@ghadeeral-balboul2249]

Eeeeeeee

[@Red86ify]

АХАХА а микролифт в конце защелкивать кто будет? Естественно не показали потому что без сноровки защелкнуть его обратно этот тот еще секс