CASE 580C Left Side Brake Disassembly, Rusted Parts Kept Loader From Moving, Part 1 of 2 Part Video
Vložit
- čas přidán 26. 08. 2024
- In my previous video "CASE 580C Should I Buy This" Part #1 and Part #2, I realized that there was definitely a problem with the left brake that prevented the loader from moving while under power. I wasn't sure what the exact problem was so I started by removing the left brake housing. What I found was a lot of rusted parts. I freed up one major part that allowed me to get the loader moving again. This video focuses on the disassembly of the left brake and freeing up those rusted parts. My next video will focus on the reassembly of the left brake. Thanks for watching, please consider subscribing and be safe and be blessed. :-)
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/s...
Music from Uppbeat (free for Creators!):
uppbeat.io/t/a...
License code: EUL5P25RSBFFJYFX
Music from: www.free-stock...
This was a huge help, thank you!
Welcome to Case 480 and 580 brakes. You did a great job learning your way through this. The lever pin you freed up should have a grease zerk in the end of the pin. The C model was the last to use DOT 3 fluid. the later D and E models use dextron in the Master and slave Cylinders.
Dextron? That must be what k.o. my master cylinder's.
I have a 580C, I changed out the backhoe for a FACTORY three point hydraulic hitch then put a Gannon box scraper blade w/hydraulic rippers or scarifiers on it for weight and grading roads.
I appreciate you my friend! There she be, that's my problem! 👍
I'm happy I could help.
Good stuff, thank you!
You bet!
Thanks for the video 👍
Hopefully this vdo could help me , my uncle need help on his left break lock
And Thx for vdo
I have a 580d backhoe with a lock up wheel I need to haul back home. I figured you would be the guy to asked. Do you think it's possible for me to free the brake up on the machine without tearing it apart. I just want to get it to my shop which is 400 plus miles away
First off, I’m not an authority on the Case 580’s. I would not with any certainty be able to advise you. I had the same problem and the same question. I use another tractor to give my 580C a little nudge forward while in gear running. The left brake was my froze up brake. It freed up and I drove it home 2 miles. I hope that helps.
Do I need to take out the seat and floor board? Ty bill
Yes