Hello great design! Can you please tell whether if you 3D printed the wheel grip or you bought it? If you bought it can you please share the link for the same?
By wheel grip you mean tire? Yes, that was bought. Model is BS701-002T but seems to be hard to get. There are some alternatives in the comment section here: www.printables.com/model/194299-stair-climbing-rover/comments
You can find most parts at www.printables.com/model/194299-stair-climbing-rover In the comments at Printables you can also find a link to the motor driver board schematic. I have not shared any code.
I have mostly used it for autonomous driving and not remote controlled. You can check the comments on Printables. There are some details about the electronics I used.
Hi this a beautiful design and as a college student it makes me feel like trying it out. So can you please explain or give us a circuit diagram of the electronics connection part sir. its a kind request please sir.
My electronics setup is a bit complicated, because I use it for autonomous driving. If you just want to remote control it, it can be done much simpler, but I don't have much experience with that. I would suggest, that you try to contact others, that have built it. Look at the comments section at Printables here: www.printables.com/model/194299-stair-climbing-rover/comments There is also a link to my custom PCB for the electronics, but again, that is most likely overkill for remote control.
I build it from parts I had laying around, so I don't know the exact amount. I guess in the range €200-€300 depending on if it is manually controlled or autonomous driven.
@@wildwillyrobots tengo algunas partes solo que no dispongo de impresora 3d para fabricar las partes. Me ha gustado mucho tu proyecto .aunque es algo complejo para mí. Me gustaría poder contactarme contigo a mi hijo le gusta el robot y desearía poder construirlo.
End of video should link to demonstrations. If not, then here are a video driving autonomously czcams.com/video/9Od0E53R8PE/video.html, and another driving remote controlled czcams.com/video/90HxqwZaWRA/video.html
@@darioabadie3666 Sorry, no code yet. What I have is very specific to my use and hardware, so it is not easy to setup. For people just wanting to drive the rover around remote controlled, it is too complicated.
Impressive design!
Beautiful design!
Thank you. I definitely took quite some time to make the design.
I love this tech work
high level of thoughtfulness construction
thank you for aesthetic pleasure
Man you are amazing!
Masterpiece!
Hello great design! Can you please tell whether if you 3D printed the wheel grip or you bought it? If you bought it can you please share the link for the same?
By wheel grip you mean tire? Yes, that was bought. Model is BS701-002T but seems to be hard to get. There are some alternatives in the comment section here: www.printables.com/model/194299-stair-climbing-rover/comments
All that for a drop of blood ?
Great
its really great project can possible to provide part list, circuit diagram and coding stuff?
You can find most parts at www.printables.com/model/194299-stair-climbing-rover
In the comments at Printables you can also find a link to the motor driver board schematic. I have not shared any code.
Which motor driver did you use to drive 6 Dc 6 servo
It is custom made based on a Raspberry Pi Pico, 6x DRV8871 for the DC motors, and a PCA9685 for the servos.
Hello, could you tell the material of the filament used for 3d printing the parts?
Everything is printed in PLA
@@wildwillyrobots Thank you
Hello can u tell me from where brought the remote and how you connected that
I have mostly used it for autonomous driving and not remote controlled. You can check the comments on Printables. There are some details about the electronics I used.
@@wildwillyrobots hey I have some query can you share your whatsapp number or insta id
🥰🤩💥💯👍👏
What brand wireless screwdriver are you using?
It is a Wowstick 1F+. It is struggling a bit the first time the bolt cuts the thread in the pastic.
Where can i find your power screwdriver
It is the Wowstick 1F
Hey I want parts not whole modle can you share the link
You can download the individual parts on Printables. www.printables.com/model/194299-stair-climbing-rover/files
Hi this a beautiful design and as a college student it makes me feel like trying it out. So can you please explain or give us a circuit diagram of the electronics connection part sir. its a kind request please sir.
My electronics setup is a bit complicated, because I use it for autonomous driving. If you just want to remote control it, it can be done much simpler, but I don't have much experience with that. I would suggest, that you try to contact others, that have built it. Look at the comments section at Printables here: www.printables.com/model/194299-stair-climbing-rover/comments There is also a link to my custom PCB for the electronics, but again, that is most likely overkill for remote control.
DID you use 3d printer to print the parts?
Yes, all the plastic parts are 3d-printet. There is a link to the design files in the description.
Did you publish the code?
No, but there is not much to it. Some speed controllers for the wheels and a little trigonometric calculations to find the angles or the servos.
Who is cost all proyect?
I build it from parts I had laying around, so I don't know the exact amount. I guess in the range €200-€300 depending on if it is manually controlled or autonomous driven.
@@wildwillyrobots tengo algunas partes solo que no dispongo de impresora 3d para fabricar las partes. Me ha gustado mucho tu proyecto .aunque es algo complejo para mí. Me gustaría poder contactarme contigo a mi hijo le gusta el robot y desearía poder construirlo.
Very nice design but no information
What kind of information do you need? There are more details in the link in the description.
Project without demo is waste of time
End of video should link to demonstrations. If not, then here are a video driving autonomously czcams.com/video/9Od0E53R8PE/video.html, and another driving remote controlled czcams.com/video/90HxqwZaWRA/video.html
Did you publish the code?
No, not at the moment. I need to clean it up before publishing.
@@wildwillyrobots Hi man! Great design 😁 do you have any update regarding the code? Thanks!
@@darioabadie3666 Sorry, no code yet. What I have is very specific to my use and hardware, so it is not easy to setup. For people just wanting to drive the rover around remote controlled, it is too complicated.
@@wildwillyrobots Oh I see. Well, thanks for the quick response! Hope some day it is ready to be used using a raspy with generic drivers.