EASILY Cover The Chrome Window Trim On Your Car

Sdílet
Vložit
  • čas přidán 14. 05. 2018
  • Showing you an easy way to wrap the chrome trim around the windows of your car
    Check out the product here on Amazon:
    bit.ly/VViViDGlossBlackTape
    www.ckwrapstoronto.com/
    Get Certified Visit www.vvividhq.com/get-certified
    Instagram @ckwraps @newconceptautosalon
  • Auta a dopravní prostředky

Komentáře • 274

  • @roughryder5
    @roughryder5 Před 6 lety +48

    You came a long way dude. I watched your earlier videos where you used to wrap cars outside on your front driveway and now your here wrapping expensive whips in an industrial garage. Good work my dude.

  • @jonblakk73ab
    @jonblakk73ab Před 6 lety +24

    I was researching on how to wrap cars to add to my tee shirt business and I came across this dude I subscribed and I’ve been hooked this guy is dope,keep up the good work 🙌🏽🙌🏽🙌🏽🙌🏽

  • @alrestauro
    @alrestauro Před 4 lety +10

    This is "THE BEST" informational video I've seen so far! Great execution and technique! Thank you for sharing!

  • @ghc_gto_6.0
    @ghc_gto_6.0 Před 6 lety +5

    Car looks way better with that clean wrap job of yours!! Enjoy your vacation!

  • @guy3749
    @guy3749 Před 6 lety

    Awesome I need to do that on my car, old one is faded and cracking off, plus I'm about to repaint and clear coat it so this would set it off nicely. Thanks so much for this vid and where I can find this stuff, I was wondering how I was going to cover my chrome trim. Nice job !

  • @kvharris30
    @kvharris30 Před 5 lety +6

    Thankyou thankyou thankyou bro. Ive been watching alot of your videos, to learn better techniques, and i love your work. Ive only did wraps as a hobby but the past few months,ive learned hell of alot more tricks. And im now getting paid for my work, and setting up my own work station. Thanks for your vids,and tutorials

  • @Rob-ty3ig
    @Rob-ty3ig Před 5 lety +1

    thankyou for taking the time, did this to my audi today, not perfect but your video was so helpful.

  • @averagemyke2843
    @averagemyke2843 Před 6 lety +1

    Have a good vacation , great job and great video as always. Much better looking with the chrome blacked out.

  • @bradd5112
    @bradd5112 Před 4 lety +1

    Super helpful, thanks for hitting all the little details on this job!

  • @mikea.7370
    @mikea.7370 Před 6 lety +35

    You da man! Keep up the awesome work! Also, there may be a lot of roof wrap videos already but I think many of us would agree that a roof wrap video from you especially around an antenna/ shark fin would be awesome. Your videos are top notch

  • @dwdrum11
    @dwdrum11 Před 5 lety

    I’m about to do my b7 rs4 saloon as the aluminium trims have gone milky and there’s no way of cleaning it off. The trims are a huge job to remove and replace so I figured I will wrap them. Colour wise I’m doing it in Matt silver to keep the car standard looking as mirrors, radiator grill and wheels are all Matt silver. Thanks for posting such a helpful guide. Hopefully mine will look as neat as the job you’ve done on the Mercedes. Cheers

  • @chuckcribbs3398
    @chuckcribbs3398 Před 3 lety

    You do great work. You're very thorough and do it right the first time. 👍🏻

  • @chubbystacks
    @chubbystacks Před 5 lety +1

    Awesome video. I've been looking for ages and this walkthrough is spot on!

  • @aGuyNamedEr1c
    @aGuyNamedEr1c Před 5 lety +58

    You make it look easy. If I tried that it would look like Saran Wrap on grandma's casserole dish. 😂

    • @fativ3574
      @fativ3574 Před 3 lety +3

      I saw this vid and thought oh damn this is easy, just tried it at my car and ragequitted

    • @curtpemrick5516
      @curtpemrick5516 Před 3 lety

      @@fativ3574 lmao ragequitted?! Never heard that term before but I definitely been there!

  • @HarlowedQuinn
    @HarlowedQuinn Před rokem

    Love it! "Why do all the easy stuff and then get to the tough stuff and f--make a mistake" haha I appreciate your professional AND your day-to-day speech, man! heehee! Great video! Thanks!

  • @GNCCUTV58
    @GNCCUTV58 Před 5 lety

    Great videos man. Keep it up, watching your videos have made me want to start my own small wrap business. On this CLA you mentioned doing a roof wrap as well. I am going to do a roof wrap on my girlfriends CLA this weekend. Mind if I ask how you got the black antenna cover off the roof?

  • @Archeagle
    @Archeagle Před 6 lety

    Cool. I have a car to do today and your video came at point! thanks!

  • @DonisGP
    @DonisGP Před 4 lety +2

    I have a cla250 and I have been wanting to do a chrome delete at the same spot thanks for the help man :)

  • @superjavi-cp1ks
    @superjavi-cp1ks Před 5 lety

    I am looking to delete chrome bumpers on my truck, however it has a dent on the front side how would i tackle that area ? Love your channel man! Your awesome and great mindset and attitude! Keep it up

  • @SmileyManPrince
    @SmileyManPrince Před 3 lety +15

    I did a chrome delete on my grill trim, and on all my window trims. Looks professionally done too! Definitely didn’t take me a longer than a hour and a half though. Could’ve been faster but it’s my first
    time doing it. I personally think it’s not worth paying over $100 or $200 or even way way way more! to get it done at a vinyl/Tint shop. DIY! People! Save you money and you learned something new.

  • @ericksaenz4055
    @ericksaenz4055 Před 4 lety

    Wish your shop was here in Tampa, very clean work 👍👍👍

  • @Dreamingbigent
    @Dreamingbigent Před 3 lety +62

    I’ve been calling around and been getting quoted 300+ close to 800 smh I’ll just do it myself I have a 2018 accord sport

    • @angelmartinez9329
      @angelmartinez9329 Před 3 lety +5

      How did it go? I have a 2020 accord sport and thinking about just doing it myself too.

    • @Dreamingbigent
      @Dreamingbigent Před 3 lety +5

      Never got it done as of late

    • @k9keo
      @k9keo Před 3 lety

      🙀

    • @TheRacinGolem
      @TheRacinGolem Před 3 lety +1

      @@Dreamingbigent if you still wanna do it and don't care about some seam lines, use blackout tape. Buy multiple rolls tho cuz 2 whole rolls weren't enough for the windows on my 2017 TLX. Looks pretty damn good tho

    • @anchhwa
      @anchhwa Před 3 lety +2

      after many failed attempts to make my accord coupe look good i’ve accepted a 450 quote for windows and door handles in gloss black

  • @salvaquest2123
    @salvaquest2123 Před rokem

    Cheers bud a good informative video, 👍 I have done a car previously which looked good but knew it could be better so thanks 🙏 for the tutorial, 🤔interesting to see very little use of the heat gun, which I will definitely take note of this time round 😀👍

  • @keyboardwarrior2812
    @keyboardwarrior2812 Před 5 lety +4

    Great video/ great job love watching your videos very intuitive. The black trim looks 100% better than the chrome.

  • @marvicgarcia2944
    @marvicgarcia2944 Před rokem

    Nice intruction and clear explanation! Love this😉😉👏👏

  • @Kris-82
    @Kris-82 Před 6 lety +10

    Can you make some tutorial how to cut with knife on the edge with some close ups?

  • @garymay8118
    @garymay8118 Před 3 lety

    looks awesome. did you take the protective film off the topside of the wrap before or after

  • @DiestlerVonGrim
    @DiestlerVonGrim Před 3 lety +1

    Big thanks to you for being such a through and good teacher!! Have helped me to start my own business doing this.

  • @g-tech3113
    @g-tech3113 Před 9 měsíci

    Great video, thanks for all the information man

  • @Dreihme
    @Dreihme Před 9 měsíci +1

    As a beginner, I found that it's worth it to cut the film following the general curve of the trim to eliminate relief cuts and alleviate the tension from stretching a straight piece.

  • @rstarrkk
    @rstarrkk Před 4 lety

    You do good work man, keep it up.

  • @jesuslopez6819
    @jesuslopez6819 Před 9 měsíci

    thank you good video ,do oyou have a video on how to wrap a car emblem or chrome out a grill of a jeep cherokee

  • @rstezza
    @rstezza Před 6 lety +134

    Would it be worth you investing in a GoPro head camera. So we can see what you see??

    • @CKWraps
      @CKWraps  Před 6 lety +13

      I have one, just need a way to mount it to myself

    • @CKWraps
      @CKWraps  Před 6 lety +9

      I don't want to wear it on my head because it's distracting

    • @rstezza
      @rstezza Před 6 lety +6

      CK Wraps you can get a chest strap. Or get mrs CK to record 😂. She does a good job.

    • @CKWraps
      @CKWraps  Před 6 lety +21

      Chest strap it is

    • @exclvsive
      @exclvsive Před 6 lety +4

      GoPro has a mount that mounts on fitted or flex cap when worn backwards. Regardless, thanks for sharing the knowledge!

  • @joapps8135
    @joapps8135 Před 6 lety

    nice work. on a charcoal gray 2018 yukon denali, im thinking of getting a slightly lighter shade of gray than the body color to delete all the chrome... but will it be hard to match that lighter gray color for the large chrome grille and emblems/badges? what would your shop use for the denali grille?plastidip paint?or can a heavily grated grille be wrapped too?

  • @mickmcmick8247
    @mickmcmick8247 Před 4 lety

    Really looks amazing.

  • @ducebigalow8834
    @ducebigalow8834 Před 6 lety +1

    Like the new intro. Great video, looks awesome!Having this done to my 2018 civic hatchback next week. Enjoy your vacation.

  • @Dre215taylor
    @Dre215taylor Před 4 lety

    Super easy to do used vvivid wrap tho it’s still good tho hardest part was the ends by the doors but really simple once you get a hang out it

  • @Aztlan10
    @Aztlan10 Před 6 lety

    Hi Christian, can you give me some advice on how to wrap a front bumper of a Pontiac Fiero GT 87. Do you have wrapping videos in old cars? Like Camaro's, Firebird's, Trans Am's etc. I am a big fan from Baja California, México.

  • @charleygrossnicklaus4278

    awesome your work is amazing thank you for sharing

  • @luiscampos7952
    @luiscampos7952 Před 6 lety +1

    Hey there Buddy, I little question here, my Audi has rubber window trim, hence it's a boring rubber color and I'm looking for that clean Gloss finish. I was wondering, is it possible to wrap window rubber trim? by prepping the surface properly and all that. Thanks bud!

  • @robb4879
    @robb4879 Před 2 lety

    Talk about a quality job. I hope to find someone with your level of expertise. 🤞

  • @davisje011
    @davisje011 Před 6 lety

    Can you show a video of a trim delete on a harder car? My 17 fusion has a very tight rubber lip right up against the chrome and a wide curved piece that i'm kinda lost on.

  • @jasonkeller5732
    @jasonkeller5732 Před 4 lety

    Have you had to wrap any Honda CRV exterior B pillars from fading? They call it sash tape. I was looking for a video on b pilllar removal and found your vid on lower door seals. The vids are great. I hope you can find a pov camera that you can comfortably wear.i want to see your knife up close. Thanks!

  • @fubarmofo6969
    @fubarmofo6969 Před 6 lety +4

    Trim seems so easy but I found out it is realllly tricky. I redid mine 3 times cuz your right any little movement with blade you have chrome showing. Even a tiny sliver of chrome stands out like BOOM! Definitely a pro knocking these out first go round and look flawless like usual.

    • @CKWraps
      @CKWraps  Před 6 lety +2

      It's all in the wrist man. Knife work is another skill to work on

    • @fubarmofo6969
      @fubarmofo6969 Před 6 lety +1

      CK Wraps lol amen brother

  • @xavierlee2201
    @xavierlee2201 Před 4 lety +1

    I want to be as good as you. nice & clean, well done. I did this on my Toyota Rav 4 and I realize it is so difficult to find the proper link to cut. And I end up cutting my rubber. T T

  • @aneuryalmanzar4557
    @aneuryalmanzar4557 Před 3 lety

    Finally found the best video to do my car. Thank you

  • @timglover31
    @timglover31 Před 4 lety

    I'm fixing my car up, and wanting to do this to my 2008 Honda Accord. Would you suggest doing this before or after I send it to the body shop to get repainted?

  • @encastcustoms
    @encastcustoms Před 3 lety

    Painted quite a bit of trims that were wrapped...never pretty once I've taken the time trim off. Even if your extremely precise cutting it, Always a cleaner job and lasts when parts are removed so theres no peeling up. Good job though 👌

  • @davejanszon3348
    @davejanszon3348 Před 6 lety +1

    Enjoy your vacation!!!

  • @reviving3255
    @reviving3255 Před měsícem

    I wanna see you do a 2015-2020 Tahoe. My rubber around my trim is not loose.

  • @nigebemand7124
    @nigebemand7124 Před rokem

    Nice job great vid very helpful. cheers

  • @ohb7517
    @ohb7517 Před 4 lety

    Is that referred as a seal between the mirror and the window ? I had took off my whole seal just to tuck better but I can get the seal that goes in between my window and mirror to go back down the rail

  • @rianhamman6187
    @rianhamman6187 Před 3 lety +1

    Any chance you can tell me which line of Avery you prefer for this ? The 500, 700 or 800 series ? I'm guessing either the 500 or 700 series since you said you prefer it thin ? Or do you use the cast series ?

  • @AZDESERT2024
    @AZDESERT2024 Před 5 lety +1

    Over chrome window trim, which do you use most often - Satin or Gloss Black ?

  • @davidm6751
    @davidm6751 Před 3 měsíci

    Looks great/ I took my Subaru to a shop today in Cincy, all I have is the bottom window trim on chrome the rest is already black. I was thinking they’d say about 150-200, they said 550-700$!!😱
    Prob take a pro about 30-40 mins.. needless to say I’m going to try this myself.

  • @abc.garage
    @abc.garage Před 5 lety +1

    I’m trying to do a chrome delete on my Mazda 6, this gave me a lot of good information!

  • @markoss110l2
    @markoss110l2 Před 5 lety

    Very nice job!

  • @lazariusanderson6771
    @lazariusanderson6771 Před 3 lety

    very clean job bro

  • @187redrum88
    @187redrum88 Před 2 lety

    Hello mate for m London UK .. if you could advise which chrome tape I'd better .. and stretches ??

  • @kashyapgandhi4165
    @kashyapgandhi4165 Před 5 lety +1

    How long it will stay on chrome part? I have seen many cars after 5-6 months its start pilling.

  • @ot7694
    @ot7694 Před 6 lety +1

    Coming through with the tips and wrapping lessons!!,💯

  • @aarontate189
    @aarontate189 Před 4 lety

    Great tutorial, thank you:)

  • @artemartem8425
    @artemartem8425 Před rokem

    You do the perfect job 👍👍👍

  • @lummy321
    @lummy321 Před 3 lety

    Awesomeness CK 💯💗

  • @Dlow-kc6jv
    @Dlow-kc6jv Před 4 lety

    I was thinking of doing a satin finish. I feel like the gloss would scratch easily when applying.. not sure. the gloss does look nice tho.

  • @zu1502
    @zu1502 Před 5 lety

    What about buying new trim & spray painting then with automotive paint with clear coat?

  • @DanHickeyGuy
    @DanHickeyGuy Před 3 lety

    what if seams in the trim (e.g., adjoining pieces)? Cover up or be true to the chrome pieces?

  • @lefamily999
    @lefamily999 Před rokem

    How well does this wrap hold up to hot weather? We live in a desert like climate and I'm worried that it will peel. And if it starts to peel can it be removed without damaging the chrome if it has been exposed to 100°+ heat?

  • @PotatosPotatoes
    @PotatosPotatoes Před 6 lety +1

    Is there a flat black that might match the rest of the black? The glossy looks a little cheap to me.

  • @scrappiron6347
    @scrappiron6347 Před 5 lety

    Another great one brah

  • @fdc2023
    @fdc2023 Před 6 lety

    Mate
    What is the vinyl wrap product name or brand used please
    Keep up the great work
    Peace

  • @CWLim-so8vd
    @CWLim-so8vd Před 3 lety

    Hi. Why didnt you use heat gun to heat the vinyl wrap before pasting to car window trim?

  • @KHSxDAVIDHERNANDEZ
    @KHSxDAVIDHERNANDEZ Před 6 lety

    Love your videos man! You do amazing work!!!! I got a quick question how does gloss carbon fiber hold up after a few years? Does it yellow?

    • @CKWraps
      @CKWraps  Před 6 lety

      I've never seen it yellow but sometimes it cracks

  • @chrisreynolds6152
    @chrisreynolds6152 Před měsícem

    So is a heat gun only needed to help form the film in certain corners/angles? Doesnt have anything to do with adhesion?

  • @streetboyz1096
    @streetboyz1096 Před 5 lety +1

    Want to do this on a new Jeep Compass, too much chrome on those cars
    Want to wrap the front bumper chrome, window chrome, back window chrome
    Never done it before, advice?

  • @Vieussuex
    @Vieussuex Před 6 lety +9

    Love watching your channel and it gave me the confidence to do the trim delete myself! However, after doing the trim delete in gloss black Avery film I find that the areas that tuck under the trim or where you would stretch it at the ends to get a clean finish eventually peel back a little and I'm finding myself going over tucking it under before i go for a drive. I prep'd the surface and cleaned it with prepsol and starting to think that because I applied it when it was only 10 deg. Celsius the adhesive has not taken to the aluminium trim....or maybe it the design of the trim? For reference it's an Audi A6 avant.

    • @becausereasons41
      @becausereasons41 Před rokem +1

      Same shit with me exactly, 08 335i. Looks good for a day. Peels off the edge no matter what prep, heat , tucking ect. Paid for it to be done

    • @dominicborrelli6625
      @dominicborrelli6625 Před rokem

      @@becausereasons41 did you ever find a fix for this?

    • @becausereasons41
      @becausereasons41 Před rokem

      @Dominic Borrelli I painted them. Still holding up fine

  • @thecustomroom7474
    @thecustomroom7474 Před rokem

    Is there any benefit to rolling down the windows when doing the lower chrome?

  • @DiogoSilva-hr8ee
    @DiogoSilva-hr8ee Před 4 lety +1

    I wrapped all the chrome of my car and also the grill just with the help of your videos. Thanks for sharing your knowledge!

    • @MoDirtySoda
      @MoDirtySoda Před 4 lety

      What brand wrap you use? Thinking about doing my car

    • @DiogoSilva-hr8ee
      @DiogoSilva-hr8ee Před 4 lety +1

      DellGaming TV I used chinese wrap, bought it in AliExpress. Looks good, let’s see how long it lasts. I wrapped the grill and all the chrome parts about 2 months ago and it looks awesome!

    • @MoDirtySoda
      @MoDirtySoda Před 4 lety +1

      Diogo Silva thanks !!

    • @DiogoSilva-hr8ee
      @DiogoSilva-hr8ee Před 4 lety

      DellGaming TV you’re welcome

  • @austinbprice
    @austinbprice Před 3 lety

    Please can you link where to buy long lengths of vinyl wrap from? The likes of Amazon only seem to sell 5ft lengths

  • @kevinreyes8730
    @kevinreyes8730 Před 2 lety

    Around how much would it cost for Chrome cowless for just the 4 tires , bumper and back on a accord Honda 2020? Go

  • @Real_Crunkzilla
    @Real_Crunkzilla Před 5 lety +2

    @1:21 a free hand job? man I just came here to see you tint some chrome. good vids man.

  • @rayc3253
    @rayc3253 Před 4 lety

    it "looks" easy, but im sure it is not, but im gonna try and do it. I was wondering about the tape though. The Vvivid stuff doesn't have great reviews on Amazon. If that's what you use i would use it no problem. Do you use the vvivid? Also side question, what do you think of using matte black. I have a black car i wanna black out.

  • @bobv2247
    @bobv2247 Před 3 lety

    Question please, you say you use Avery but the Amazon link goes to Vivid Carbon Fiber wrap, can you be more specific on the thickness of the film please, thanks

  • @candicebeebe6688
    @candicebeebe6688 Před 6 lety

    Could you please tell all of us were to buy vinyl. What site or company do you use. Links please. Thanks

  • @barbaradelvalle1779
    @barbaradelvalle1779 Před 5 lety

    What is the actual name for the blade cutter? Have been trying to find it on ebay or amazon but no luck.

  • @ideaoverload910
    @ideaoverload910 Před rokem

    I have an Audi s5. Just took a look. I see the rubber seal on the top chrome is on top and bottom. So just gotta get blade in between rubber and trim, right. Looks like you have to wedge your blade in between the seal, because it’s pretty tight on the top seal. Also, On bottom trim, little easier. There’s no rubber seal on the bottom part of the bottom chrome trim. Bonus, the mirror is not in the way, it’s actually about 6 inches away from the corner of where most mirrors are, there actually a black plastic plate on that little corner, so I can do that part without removing mirror. Only fear is cutting the seal by mistake. But I’m might try it if I can’t find someone to do this job under $125. It it wasn’t such a nice car, I would just go for it, without being nervous lol

  • @chrisadams7216
    @chrisadams7216 Před rokem

    Can you show us how you would do an Audi a6 c7 by any chance

  • @David_S1985
    @David_S1985 Před 4 lety

    I tried this and it keeps wanting to pull back on the ends. It's a 2008 Audi Rs6 and the ends don't have much surface area. It's like the vinyl isnt quite as sticky as it needs to be. Admittedly it's cheap ebay vinyl as I just wanted to give it a go. Tried post heating too but it still seems to lift after a day or so on the ends. Is there a particular vinyl that has a very strong adhesive?

  • @Dublr81
    @Dublr81 Před 5 lety

    Watching all your vids! Looking to wrap the black trim on my Subie in black carbon fiber. Still kinda cool in New England, will probably try it in my home garage/driveway but wanted to know what u consider the lowest temperature to wrap in. Seems like 70s but not sure if you ever wrapped in cooler temps.

    • @CKWraps
      @CKWraps  Před 5 lety +2

      High 60's can work, anything lower could cause a problem

  • @OBS.Rey__
    @OBS.Rey__ Před 3 lety

    Hell yea more about this my dude

  • @ayudan24688
    @ayudan24688 Před 5 měsíci

    instead of solid black, i wraped it with a smoky film and turned it into dark chrome, which i think looks even better

  • @OvaltineJenkanz
    @OvaltineJenkanz Před 2 lety

    Yeah, that looks clean.

  • @sundaysgarage
    @sundaysgarage Před 3 lety

    Great guy award has been awarded

  • @TobyCostaRica
    @TobyCostaRica Před 5 lety

    Wish there was some macro/close ups but thanks for the great vid either way. 👍🏼

  • @DStreet515
    @DStreet515 Před 4 lety

    Is there a good vinyl to wrap the rubber trim with?

  • @Alycanj
    @Alycanj Před 5 měsíci

    Nothing like a Red car or anything for that matter, wish the camera was closer so could see the detailed stuff, I have learned a lot watching your videos. Ty

  • @calebschmidt6091
    @calebschmidt6091 Před 6 lety

    Do you think I could do this on my Lexus ES 350 2008 With 2” pinstripe?

  • @geraldrussell7486
    @geraldrussell7486 Před 6 lety

    that was outstanding

  • @onikshamser8746
    @onikshamser8746 Před 4 lety

    CK warp, how much do you charge for 2020 C43? I want my windows chrome delete.

  • @Sm00th-0perator
    @Sm00th-0perator Před rokem

    I asked here in Finland how much it would cost to tape the chrome window trim on the sides (not the windscreen trim) and the rear arch.
    The price estimate was around 300e. I think that seems pretty silly?