How To Easily Install a Switch Panel in a GX460. The LASFIT Switch Panel.

In this video I demonstrate how to install the new LASFIT switch panel in a Lexus GX460.
Please consider subscribing.
Follow me on Instagram: @Cruisin.Miles
Interested in a LASFIT product? Click this link
lddy.no/136vr
And use coupon code: CS10
As an affiliate with LASFIT, your purchase helps support my channel.
All parts required for install be included in the box. The only thing I needed for my install was the correct size minibus add-a-fuse. Short Minibus for the gx460.
I also chose to mount the Switch Controller to the OhanaRigSupply center console Stealth Panel.
Check them out at OhanaRigSupply.com
Instructions:
Be sure to disconnect the battery before working on any electrical components.
Find a suitable location to mount the Circuit Control Box. I chose to use the included mount and attach the Control box in the upper passenger side of the engine bay. It happened to fit just enough when the hood was closed.
From there, wire the red wire to the 80amp circuit breaker, then to the battery.
Then you may connect the black negative wire to the negative terminal or the battery.
Now take the positive and negative wires of the accessories you wish to add, and wire them to Control box, keeping in mind which hub will connect to positive and which one goes to negative.
Then proceed to thread the positive wire of the controller box into the control box first, then the wire harness through the rubber isolator through the firewall using the rubber grommet on the passenger side of the engine bay.
Once the positive wire from the controller box is in the cabin, connect it to the ACC fuse location on the factory fuse box located by the driver side kick panel.
Now find a suitable location to install the switch panel then connect the wire harness, and plug and play.
#overlanding #offroading #gx460 #gxor #switchpanel #lasfit
Brands we trust:
@Fifteen52Wheels
@drkdss8742
@GeneralGreenManufacturing
@Frontrunneroutfitters
@avoverlandsupply
@lasfitvehiclelife
@lensunsolar
@Ironman4x4America
​⁠ @Outsane (solve function)

[@DEEuroworks]

Looks good. Lot of light 👍🏼👍🏼

[@CruisinMiles]

Thanks. Not finished with the lights yet lol

[@Rob81818]

If I were to install the fuse in the engine bay fuse box, which one do you think I should be using?

[@CruisinMiles]

@@Rob81818 I’m not exactly sure. But best to install onto one that uses ACC. So when the key is turned to the on position. Most of the time it’s a 7.5amp fuse. But best to check your owners manual.