CHOPPED & WIDENED! BEST BUDGET CHASSIS SWAP EVER! 1950 CHEVY ON A PONTIAC GTO FRAME!
Vložit
- čas přidán 22. 04. 2024
- #CASEYSCUSTOMS #HOTROD #RATROD#KUSTOM #CHASSISSWAP
the best chassis swap ever gets CHOPPED!
⬇️FOR THE F100 GIVEAWAY GO HERE⬇️
caseyscustoms.com/products/19...
CHECK OUT THE 2ND CHANNEL FOR EXTRA VIDEOS! ⬇️⬇️
/ @caseyscustoms2
BECOME A CHANNEL MEMBER!⬇️⬇️
/ @caseyscustoms
ANTIGRAVITY BATTERYS!⬇️⬇️
(CC10 10% OFF!)
antigravitybatteries.com/ref/66/
HIT THAT SUBSCRIBE BUTTON!
I Finally got a P.0. Box! Send me mail, stickers, merch, anything! If enough shows up I will open it on camera! Thanks!!!
Caseyscustoms
P.O. Box 819
St.Joseph MO 64502
Stay tuned for more vids!
If you like this vid please like, share and subscribe!
It means a lot and helps the channel grow!
Also check me out on Facebook, Instagram and tiktok! 👇👇👇
/ caseyscustoms
caseys.customs?...
www.tiktok.com/@caseyscustoms... - Auta a dopravní prostředky
PLEASE LIKE THE VIDEO!
Only if you paint it that patina doesn't look right it looks like a turd. I loved the other patina cars you built this one needs paint .
@@channelofchannels7845 I agree, this needs to be painted. I would also like it to have windows!
😂
I'm a little upset you used a hammer to break that window for the initial hit. Should have been an alternator or turbo in true Casey style
Stop YELLING
Work can wait, time to watch Casey fuck around in the shop 🤣
Getting paid to watch my videos is even better 🤣🤣🤣
Now that you've mentioned it.. I've probably been paid to watch every one of your videos 🤣
@@matthewward3623 🤣🤣
Doin it right now..... bout 20hr 😮😅
@@CaseysCustoms$44.78/hr to watch this vid right now 🤙
THAT CHOP MAKES IT LOOK SOOOOO MUCH BETTER!!! AMAZING
I'd have to say this has been the best chop on CZcams. Thanks for sharing with us.
🙌🙌
Can you locate a junkyard roof from a donor roof to replace the widening in the center to where you have the meat on this roof? Keep doing what you’re doing! This is turning out bombtastic!
Literally my favorite chassis swap you've done so far man. If this ends up as a giveaway I pray to marvel jesus that I get it lol
bad news..... i already wished for it! LOL
man, if there was a way to not need those door pillars, that would look wicked! i wish glass wasnt so hard to do or was cheap. so many cool builds one could do
It did look really cool without the B pillers! I thought it looked epic without the roof and windshield
casey dropping that body saw tip down into that radiator while working on the back window .....good lord lol
Daaaamn that chop made the car look 10000% better cant wait to see it all done!!👍🤘
Would it work if you purchased two windows, cut them each, not in half, but more like 60/40, and used the 60% piece of each one so that you'd get a much wider windshield? You'd still need a trim piece down the middle, but that's not that uncommon on older cars, is it?
That's what I was thinking too👍
Heck yes,that’s what I would do
Yep, is the plan 👍 50 Oldsmobile glass is 1 piece instead of the 50 Chevy that’s 2 pieces, so the plan is get 2 Oldsmobile windshields and use 60% of each one and have a strip down the center where they will join, just like a stock 50 Chevy but it will be wider.
Killer build so far! Looking so so good. Love that you went with 3” and didn’t over do the chop 👌
I was a skeptic when it came to chopping it. I like the stock look but I have to say this chop is an improvement and very tasteful. I’m really looking forward to the rest of this build.
Giving her the "2 in the front, 5 in the back" move is also known as The Minivan.
🤣🤣🤣🤣
*Hey Richard!* We need a super cut of Casey saying "Roof". Thank you kindly.
As soon as I saw it chopped I couldn’t help but think of the car from “Cool World” from the 90s….on that note, it’s waay past my bedtime. Keep up the killer work
The 50 Chevy looks AWESOME so far! She is going to be SO COOL!
I Love Every Line Of This CAR!!! You're an ARTIST who sculpts automotive clay into masterpieces of power and class with all the details of the artifact patina remaining. This car is Al Capone's dream car! It's amazing 😍
I'm ready to see it do a gnarly burnout. I like the chop. I think I even liked it better without the post..? I might just need to see it when it's all one piece, :D
Now you need fender skirts!
I found two kittens that small in my Baja bug project years ago and had to do the whole bottle feeding routine with them, they are big and healthy now. The Baja bug is still waiting for me to finish it tho 😅
That’s how it goes sometimes lol
Bro i wanted to say thank you Casey you don't understand I have been going thru hell and struggling with my business as a mobile mechanic not alot of ppl have been needing there cars fixed stress is a mfker but you make my days better no diddy when I get a chance to sit back and watch your videos thank you you're funny asf I love the work your doing in the shop Hopefully I can get a break or maybe one of my videos go viral maybe one day I'll be famous 😂
Thank you very much for the touching (no diddy) words 🤣🤣
I’m surprised on the mobile mechanic lack of work i always said i thought that was a great business model. Soooo many people need brakes and shit done but don’t want to take their car to the shop for a day or two and wait
More chop . Please . Make door glass same hight a a 44oz sonic cup
That car would look great in a deep dark red . And all the crome redone.
Somebody out there needed that side window corner glass !
That bodystyle is my favorite to chop, I've done several. I have always wanted to widen one but never had the guts to try. Keep up the good work. im looking forward to seeing how it comes out.
Dude this thing is really starting to come together I love how you pay attention to detail definitely my favorite build
That chop looks SO GOOD!!! Daymn
This is looking Sick Casey!!!!
Very cool. I had my doubts about the chop, but I'm impressed.👍👍👍
the universe sends you cats when you need them
Just to add a little more complexity, I think the trunk lid needs to be pancaked down. The current really low sleek lines without look good.
Yea trunk and hood might end up getting a little cut too lol
LOVE the way that chop turned out, I mean the way that back window leans...WHAT!!
Dude you are an artist. This is my favorite build of yours so far.
I like all your projects, but this one is my favorite.. this is my dream car. I love it.
Love It Best looking old Chevy on the planet and will drive like it is on rails.
The chop going hard! The only thing i wouldve loved more is a pillarless door and another inch chopped in the back refer to 18:48 for the vision
Casey man this is looking awesome good job
Love this build
Between you and Ian, i love these rust bucket chops/builds!! 🍻
That looks really good!
One of the coolest things about all of the older rides is the fold-out vent window stop breaking the damn things
Awe, did you think the glass breaking in the vent window made the vent window bad? 🤣🤣🤣🤣 the glass is glued in on these, the vent window frames were taken out of the car and will be reused after the chop is done.
So, i guess, stop assuming you know damn things?
Very cool! Nice job.
I was on the fence at the start didn't like the changes but after you did it looks awesome.
No worries, That’s kinda how all chops go, 1/2 the time you think you might of ruined the car 🤣
Its a masterpiece, Casey!
i was thinking the standard roofline looks so good, but now with the chop and pillars leant forward it looks like a wicked car with new bad attitude, as it deserves with the great aussie base car underneath.
Great job on the chop👍🏾
At first I was like that’s an ugly car for that cool chassis but now it’s becoming my favorite build the chop made it for me
Love the 50,s Chevys. My first real car was a 54 bel air I wish I still had!
Love it !
Looking good Casey!!!!!👏👏👏👏
Man the chop looks awesome.
Angled Dr post is definitely a plus. Lookin good
Damn that is looking good
Casey's custom is first! All other videos can wait!👍👍👍
Looking Good!!!
Very cool build! I have a g8 gt, great handling car. Your gonna love it!
Looking cool my friend!!
That’s such a good looking car!! I really like it!!
Looks badass
This thing is looking so good!
WOW!!!!!! You did a great job on the chop, looks killer. Keep up the great work bro.👌👍🤘🔥🔥🔥🔥🔥
It looks better as the project progresses!
Great work brother 🤙🏼
Didn't think I was gonna like this at all when you said '50's Chevy, but after you laid it out I seriously think it might be my favorite and that's saying a lot because I love the Blazer, CRX, F100 just to name current ones!! No time for others I liked. Be here all night!!! Do wish I had won the Porsche Ratrod!!!! Loved that body and can't remember the power but I could've always added more!!!😂 Thanks for all the great builds and videos!!!
Gonna be a fun ride when its done. Looks awesome.
Just a suggestion... as a nod to the pontiac donor, why not do a finned aluminum insert as the Filler panel where the body was widened... kinda like the pontiac chieftains had. basically giving a badass chop top a Mohawk!
Crazy how 1 hour of google measurements makes your life way more “hard enough” than needed lmao i effin love your videos tho bro 😂
I just posted this on one of the other videos but the Olds winds hold it a one piece. Buy 2 and chop them into a longer 2 piece windshield. You only need and extra few inches in the middle from each one.
Looking awesome
27:53 awesome work dude👍🤙
Nice job looking good
I love that car. So badass👍go 1950 Chevy👍💯
reminds me of the custom EFIJI holden proportions wise. kinda fitting with the chasis too
That 2" looks huge to me!!! 3" just might be over the top bud!!!
Careful with the top. Your gonna scratch the pai🧐, never mind!!! Chop looks so much better bud!!! I agree on the back a bit lower. I wouldn't wanna have to make the windshields to work. I don't like showing off and making stuff look easy either. I do a lot like you when people are watching.... All the fans and the paparazzi are bad enough as it is!!! Had to tell people Richard is the editor so people won't realize he is head of security!!! Hang in there bud!!! Your not alone!!!😎🤩
Looking slick holmes
Oh shit😲I just fell in love all over again after that chop❤️👍👊
I agree with the back another 1/2"
I want a t-shirt that says AWRIGHT! With the Casey Customs logo!!!
Casey local fan from kc love your work I hope you finish this one!! Do a quality paint job this is a grade a build!
Looking good! Love the chop! Mike c
Hell yeah ❤❤❤
Lookin good.
Should keep this 1.
Why not stretch the roof? Cut from passenger side to driver’s side and add in the extra? Your windows would all fit a heck of a lot better.anyway,let’s go Casey!!!
Gotta say i watch your stuff cause most youtubers only post once every few weeks some even monthly so do what you can keep doimg what your doing cars are looking better and better
just love it,hope you do a giveaway on this one,
is looking awesome
Ray Charles welding glasses match Ray Charles welds Haha
Casey you need to get yourself a couple cable cranes at HF. They are the bomb when working by yourself.
Just curious if you've considered putting the windshield on the back and using something g wider for the front
Well done
how do you plan on doing the glass for the windows?
I love this car!!!!!!
I like it as is with no post and at that height. Well never mind. You just started cutting the back.
Poor Richard your cop editor having to bite his tongue every time you go go drive your projects around
OK you got me on this one. Enough ford's. Thinking a late model GTO donor for a 50s 50s Chevy short bed step side P.U. for you next body swap. Any interest? Really like to see you use the C5 transaxle somewhere. Gives better weight transfer. Maybe into a 80s El Camino with a warmed up SBC. That would be cool. Torque tube etc.
That car is gonna look wicked in my driveway
Love the confidence ❤️🤣
Agreed 100%
Back needed to come down about 1.25
I am starting to like the body swap chop.
9:41 you know seeing the windshield the way it is you could have done a dimpled bit of steel to make it more race car
Way cool.
This is the sickest car on the planet. I love the g8 gt