Dodge Ram Dee Zee Tailgate Assist | EZ Down (Safety Device!!!???) | AnthonyJ350
Vložit
- čas přidán 4. 02. 2015
- Open your tailgate with more style and make it a little safer (for the kids) with Dee Zee's Tailgate Assist. In this video I go over the benefits of installing this simple accessory for your truck. Vehicle shown is a 2015 Dodge Ram.
Music available at www.jinglepunks.com
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
Music available - www.jinglepunks.com & www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Dodge Ram Dee Zee Tailgate Assist | EZ Down (Safety Device!!!???) | AnthonyJ350
• Dodge Ram Dee Zee Tail...
ANTHONYJ350
/ anthonyj350 - Auta a dopravní prostředky
I don’t think I would have gotten mine on my truck without your video.
Glad to hear the video helped! 😊
I received this same tailgate assist as a gift. I hesitated to install this myself as I thought it may have to be done by a professional. My son and I installed it in about 20 minutes on my Ram. Thanks for posting this instruction.
john prendergast Hey, glad it helped!
Great Video! Followed your instructions to the letter and I completed it within 20 mins. Works great! Keep the videos coming.
Glad the video helped!
This was one of the first things I installed on my ram and has worked like day one for the past two years. The price is so affordable for what it does and I would, and have, recommended these to any truck owner I know.
Nice, thanks for sharing!
I just ordered one for my 13 ram now after watching this video it makes sense how it mounts on the tailgate itself. Great video 👍🏻
TheTby
Though this is an old video, I received one of these as a gift, and your video saved me some frustration, many thanks!
Glad it helped you!
I watch three previous videos, they were difficult to make sense of. Your video on the other hand no I can install mine without any problems. Thank you for sharing
Glad to hear the video helped you!
thanks for posting this. i just installed the same kit on my 2015 ram. install went super smooth.
+Chicken Glad it helped!
Just wanted to say thanks for your videos, I've actually viewed a couple of your videos for some of my Ram 1500 accessory installs like the tri-fold backflip 2!!
Makes my life less stressful!! 👍👍👍
+MrSteve01974 Glad they're able to help people such as yourself!
@@AnthonyJ350 What tail lights are in this truck?
Finally a video that goes step by step and shows the whole function of every part of this tailgate assist.
Even that little black cable guard
Because instructions don't even say three in from top of cable
And removing limit guard.
Very good video in my opinion.
Thanks for watching!
You dont have to take limiter of. Use a punch and hit it flat. Did that to mine and has no problems
Thanks to your vid it took me about 10 minutes after getting the tools together. Actually the hardest part was getting that hard plastic sleeve on the cable. For some reason mine fought me.
Thanks for the great time saver!
Happy to hear this video helped you!
I put one on my 2014 Ram and just installed another on my new 2017 Ram. Great product. You forgot the mylar paint protection tape on the inside of the tailgate. It is provided in the kit. Great video!
Good point, thanks!
I had the tail gate hit and drop my daughter when she tried to open it. I got one the next day and it took maybe 10 minutes to install. Very nice operation and I'm going to get another for the other side to help in case of failure.
Right on bro! Made it wayyy easier than the NON instructions! 🤙🏽
So glad the video helped you out! 🙂
Thanks for a great video. Would like to add one thing. The factory cables have a " protective " vinyl coat. The plastic will fatigue and crack in cold winter weather in just a couple of years. This caused my wire cables to prefer to bend at the break in the plastic, resulting in the cables themselves breaking at that point. When I replaced mine, I carefully skinned off the vinyl sheath with a pocket knife, then lightly coated the cables with anti seize grease. That was ten years ago. My cables are still in perfect condition. I believe Ford and Chevy use the same type of coated cables.
Thanks for sharing!
Could not have gotten through this without your vid. TY!!!
Glad it helped!
"Like I said, you take vise grips and..." That was hysterical. Great video! Thanks for the help with my install :)
Haha glad you liked it!
The perfect product! And at the same time I also bought this tailgate assist.
www.amazon.com/IAQWE-Tailgate-Assist-Compatible-Pickup/dp/B07ZNHBC4Z
Now this tailgate assist has a 45% discount. Code: 45HGFRTY
Safely control the falling speed of the tailgate of my car, and I no longer have to worry about my child and my grandpa being injured by the rapidly falling tailgate, very convenient!
@@iaqwewang9521 what car do you have with a tailgate 🤔
Watched your video and it helped me put this on my new/used 2012 Ram. Thanks brutha.
You're welcome and thanks for watching!
Great video, very well done.
Thanks man, appreciate it
Puttin this on in morning
Glad the video helped you!
Good video AJ350 for us Ram owners!!!
Glad it helped! Hopefully it will help other truck owners as well.
Thanks for the video! Installed in 10 minutes following each step. Made my day!
Alain LeBlanc Nice!
10 minutes my ass.
Nice done following your video! Great job! Installed in my 2018 Ram 2500
Great to hear it worked for you!
Great video, took me 10 minutes to install, thanks buddy👍👍👍
Corey Kearns Nice!
I watched this video a year or two ago and bought the part last summer. Just installed it today. My kit is different though and i have a 2015 1500 crew cab 5'7 bed
How do you like it?
I'd like to add, for removing that factory retainer on the backside of the cable limiter. Use a pair of side cutters, cut it off in about 3 seconds rather than trying to unthread it. Also, that plastic cable clip's purpose is so that the cable doesn't jam in between the bed and the assist shock. It is required, do not perform install without it. I know this because I "tested it" before installing that clip and sure enough my cable jammed between the bed and the shock.
Other than that, so far I love it. Good video.
Thanks for the info!
You did good on the shock. That is the correct position not because of the legibility, but because you should place the ram / piston in the down position that way water/ debris fall off .
Thank you. I was just following the manifacturer's directions.
I've had a EZdown for my Nissan Frontier for about 2 months. It worked well for about a month. However, the clip the holds the upper mounting in place is really thin and bends when you put the tailgate up. I can't seem to keep the strut from popping off. When it does the tailgate slams down. Any ideas?
Thank you! Very detailed and useful vid!
Glad it helped you 🙂
The nutsert I got looked used, and when I tightened it, only 3 mushroomed out and the others stayed straight causing the nutsert to misalign
Great video on the DeeZee. I have the bacflip vp cover also and will be adding the DeeZee tailgate assist as soon it comes in the mail. I saw the video where you added a 20in Alpine TV in a, I think a F150, do you plan on doing the same in this truck? I want to add the same TV to my Dodge Ram 1500 Sport. Lastly, where is your shop located.
I just installed mine best way to deal with the anchor nutsert is tighten it before u put it in the tailgate just enough to get it to hold otherwise it will just keep spinning
What are the size wrenches your using other than the T 45 please?
Like a lot of people, I had trouble with the jury-rigged nutsert tool they sent with the kit. There's too much play between the allen bolt and the other components, so when I tried to turn the nut, the washers and bearings got out of alignment and bound causing the whole thing to turn together. Here's the fix: Set up the nutsert tool with the allen head 3/4" from the first washer as per the instructions. Remove the washers and bearings. Wrap about 5-6 turns of electrical tape around the bolt just below the nut where the washers will go. Reinstall the washers and bearings, and trim the extra tape flush with a razor or utility knife. This creates a bushing between the bolt and the washers/bearings so they stay aligned and turn smoothly without binding.
I agree that this is the trickiest part of the installation. First off, the instructions scare you into thinking you will surely strip this and mess it up with their nine turns exactly, mark the nut and don't, don't, don't. First of all the part should be sturdier so that it is mistake proof. Secondly a lot of people will probably do what I first did and that is not make it tight enough when you use the special 'blind nut tool' to set the blind nut. The symptom will be that the ball mount will not screw in - so you may think you stripped the threads. But if you consider how the blind nut is set - if you don't get it tight enough the shorter length of the ball mount screw (compared to the 'blind nut tool' may not reach the threads (think of how the blind nut works in that it pulls the end toward the sheet metal and tightens the nut just like a molly nut works). So go back and insert the 'blind nut tool' again and pull it tighter, now the ball mount will reach and you can tighten it to the 8 pounds torque. Anyway that worked for me. PS: great video.
Have you have used your channel several times you do a great job. Without it I would have screwed up a couple things thank you.
So glad to hear the video have helped you!
I like your Canadian Tire tape measure. They discontinued it and Ive never found another that I liked as much as that one.
Really? That sucks they don't make it anymore.
Thanks for this video. I followed it step by step.
Awesome! Glad it helped!
hi i have 2013 dodge ram1500 and i yes intall tail gate assist everything is fine the only problem is when I open the tailgate lower too fast. somebody have an idea what's going on thanks I appreciate it free help
Great job on your video. It helped me install mine so I did not need the instruction sheet it came with lol
Glad it helped!
Thanks for the video. Easy install.
Glad it helped!
Great video on the DeeZee. I have the bacflip vp cover also and will be adding the DeeZee tailgate assist as soon it comes in the mail.
You did well. Don't be so hard on yourself. We all have different talents.
Thanks for the comment
"Like I said, using vise grips." Nearly every time I eventually use vise grips, I feel like it should have occurred to me much sooner to do so. It's like they make them feel so uncool to use that it's the last tool I WANT to reach for, but it really is the tool that most often resolves a problem that I couldn't resolve any other way. Well, that and a hammer.
Ya totally lol
Thank you this video help me so much more and then the instructions that came with the item
6284bernard Glad to hear it helped!
Yours came with instructions ?
Nice vid. A few hopefully helpful comments. for the limiter washer, rather than completely removing it, can just use a hammer and a punch to flatten out the limiter tab on the washer. For the nutsert, you can put the thread lock on the threads that pull out the nutsert...make it easier to expand. Last, chalking the tailgate side and bed side where the parts might rub, you can see if there is rubbing by opening and closing to see if any chalk gets removed. If so, put a thin mylar sheet in the area to prevent paint from rubbing off
Thanks for the tip and watching!
The instructions had me simply use a punch and hammer to flatten the limiter tab in place. Much easier.
Thanks for sharing!
Thank you for the insight. Going to install mine soon. 🙂
Glad the video helped!
@@AnthonyJ350 New sub too. Appreciate your content. Trying to get where you are with my channel. Did you get your silver play button yet?
@@MasteringMayhem Thanks so much for subscribing! I subscribed to you too, you have some cool tool content.
I actually just got my Silver Play Button last week and shared it in the community section and on Instagram 😀
Thanks so much made it soooo much easier 😊
Glad to hear the video helped! 🙂
Dope vid man
Thanks!
Great video 👍🏻
Thanks for watching!
This worked well. Thanks....
Glad you got it installed!
Just installed mines. Yes it is alittle different. I guess they redesigned it.
Ya that has been a lot of the feedback that the new ones are a little different.
Nice install doing mine tomorrow
Nice!
anyone know if I can purchase just the nutsert? I messed up putting it in and its warped now. would hate to reorder the whole kit for just that
You'd have to try a fastener store like FASTENAL
When removing the "limiter" washer on the tailgate, you enable the cable's metal end to rotate against the painted surface of the tailgate every time it is used... removing the paint and enabling rust and corrosion.
Maybe it would be better to just grind off the smaller bend on the limiter washer (not the bend that keys into the tailgate). That way, all the rotating and grinding happens between the galvanized washers instead of abrading the exterior painted surface? Good video, Thanks!
I would spray Fluid Film over all the components in the tailgate to prevent corrosion and adds lubrication.
Just installed mine. I liked your solutions but considering this comment I am glad I followed my instructions. They must have changed it up a bit because of this. They tell you to take a hammer and chisel and knock the tab back to flat. It becomes out of the way while leaving the washer in place to keep the cable from rubbing paint off.
@@caserts33 Good field expedient solution! And yep, I am also a fan of Fluid Film.
i am looking everywhere for that little plastic shield you installed on the tailgate cable to protect it and cant find anywhere can you tell me what is the exact product name of that and where possibly i can get it?
Which part in the video?
Great install. Will this work on older models? I have a 1999 dodge 1500 that I would like to put one of these on. Your knowledge about that would be appreciated.
Should be able to. Check their website to see if they have a product for your application
Your video was the best one I found on how to actually install it , on my instructions they told me to remove the rubber block but you didn’t , is there a reason for that you didn’t ?
Which part in the video are you referring to? Rubber factory block on the truck?
Thank you so much! Made install on a 2014 Ram 1500 much easier. The paper instructions just aren't as good.
Thanks for watching!
I used this video to install mine a while back and need to know how the hydraulic part connects to the joint; was it just pressure? I need to replace my taillight and need to move the hydraulic bar for a minute so I can access the screws holding the taillight in place. I just don’t want to pull on it and break it. Thanks in advance.
You just unbolt it
That is one nice looking truck
Thanks for watching!
Great video
Thanks for watching!
Hey, will this fit 2018 ram 1500 crew cab? The tailgate looks the same as 2015 ram 1500
I would think so, the body hasn't changed on the outside as far as I know.
Thank you
Had a problem with my Ram1500 tailgate. It didn't latch properly. I was hooking up hitch. It slammed down on my hard head and almost knocked me out. Probably operator failure but assist would have been good.
Most definitely! This accessory makes a huge difference.
Nice looking truck
Thanks, it's my buddy's.
Thank you!
You're welcome!
Mine did not come with that blue liquid :/ where could I get or is it even necessary?
Thread lock blue can be found at your local auto parts store.
Are the taillights tinted or VHT shade sprayed?
Tinted I believe.
I just tried to install mine today and I can't get past the insert part, my insert keeps moving along with the washers and does not tighten up after the 9 turns, I can pull it right back out of the tailgate, any ides how to keep the insert from spinning? Thanks Mike
I'd have to see a video of what you're dealing with.
MrMikey1224 mine did the same thing.
Howd you get this hooked up with the rubber piece on the inside? I had to get mine out to be able to close my tailgate
They switched some set ups after 2017.
Yours might be a little different than the one in the video
Never worked on my 2017 hole is bigger on the tailgate didn't want to tighten up.
Dean Zelles Did you contact tech support?
I followed your video to do this, so thanks. Only thing is you forgot to remove your black rubber bumper on the drive side.
Thanks for watching and pointing that out!
Good information
Thanks for watching!
Does your tailgate have a bigger gap on the left side due to the tailgate assist?
No it doesn't shift over if that's what you're concerned about.
I installed mine, and it pushed the tailgate to the right. Causing a big gap on the driver side
Installed on my 2017 Dodge Ram Big Horn. Install went great no problems. Does anybody else have a problem with the right side of a tailgate trying to pop off at times. It just started doing that
the dee zee only works on the drivers side
Nice!
I had to remove the hard plastic sleeve from mine. Every time I would close the tailgate, it would push against the strut, popping it off the ball at the end when it would come down. Anyone else with this issue?
Yes. I moved the plastic sleeve to the bottom and it doesn't interfere.
Thanks for sharing your experience!
A couple of things. I bought one on amazon. It was devoid of any Deezee markings. Was supposed to have a clear film in the package and did not. The right angled toed wrnch it came with doesn’t fit my Ram . And everything including this video says it’s a T45 Torx. It is not. It’s a T40. I can not even find a T45. The plastic piece that clamp onto the cable is so loose on my cable it slides up and down. I put a couple of wraps of vinyl electrical tape on either end to keep it in place. I m wondering if Amazon sold me a cheap Chinese knockoff.
High chance if it doesn't have any EZ Down logos anywhere. Did it come with instructions?
AnthonyJ350 yes but nothing mentions DeeZee
You tapped in the nutsert with a rubber malet. Didn’t the nutsert spin when you tried to put the bolt back in to tighten it? You didn’t show that part.
No I was able to tighten it.
nice man thank you
Thanks for watching!
Just installed one on my 03 1500... Problem is I have to push the cable to the right when I shut it otherwise it gets stuck and nearly pops the strut off when trying to open it. Gonna have to install a little bumper so the cable clip can't slip behind the strut I guess
Can the cable pivot? If it's too tight I've seen that happen.
I wish you said what size wrench you used to tighten the thread.
Me too. I guess it'll take you 5 minutes more now to complete the job.
@@AnthonyJ350 lol
I don't get why you have to remove the limiter... Mine came without instructions so thank you!
Thanks for sharing!
Will this fit the 3rd gen Dodge Dakota
If it's listed, yes.
What would happen if you were to install it on both sides ❓
If you can get it on it will lower slower.
Go to 3:08 of the video to see the install portion of the video. You're welcome. Now for the next tip watch your volume for some reason another CZcamsr thinks they need music blasting louder than the talking portion of the video. You're welcome again.
Thanks for the feedback!
I bought this for my 2004 silverado last year,it lasted only 2 months.After that it was completely useless.I hope yours will last longer Anthony.Regards
Well that sucks. Did you try warranting it? I have an EZ Down on my Silverado and that thing is like 7 years old now. Maybe try that one for yourself?
AnthonyJ350 Yep that sucks,i did not bother trying to warranty it cause i bought it of ebay and paid 35$ for it.I wiil buy a 2014 silverado or sierra to solve that problem lolll.
A +++ video
Thanks for watching!
They make these for GMC Sierra????
+colehman72797 Yup, they're available for all popular pickup truck applications. Just check the link in the description.
The ball is not screwing in. It’s loose and I cannot get it snug
Did you use vise grips like I did in the video?
I got my tail gate stolen maybe make a video of a tail gate lock. to remind people there are low life ppl out there...your video is helpful I will get this for my truck ..
+Lorena Villela That's a good idea. I do mention it in my daily driver video. But that video is super long so a lot of people might miss it.
I've noticed that all of the ram intallation vids for this tailgate assist are missing some important info (IMHO). Apparently DeeZee has updated this kit and now instead of a ball stud that threads directly into the nutsert they have a ball mount plate( at least in the ram kit)-which is obviously far more robust than the ball stud. I've read posts where some have had it (ball stud)break/snap off. Also read posts where some had trouble getting the nutsert to "set" and it wouldn't anchor itself in but would just keep turning without ever tightening itself into the hole into which it was inserted.The DeeZee vid shows to use some of the blue thread locker included with the kit on the nutsert bolt and to let it dry for at least an hour before attempting to install the nutsert. Check out the vid here; czcams.com/video/MVS-cEOkEXQ/video.html
Thanks for sharing!
Kind of surprised no thread lock was used on the upper bolt.
You can put some if you want.
1/4 INCH FROM THE WASHER TO WHICH END OF THE HEAD?
Which part in the video?
@@AnthonyJ350 Lets go to the tape measure scene at 4:20 into the video where you say "from the washer to the HEAD is going to measure 3/4 of an inch". The issue is that the head, itself, is about 3/16 inch long and you are not clear about measuring from the outside end of the head OR the inside of the head.
I may sound a bit petty but the head does have two ends.
Goog video 👍
Thank you!
I struggled for over an hour with the stupid nut-cert and still not installed. gave up for the night.
Russ Ramos What was it doing?
Russ Ramos Lol I struggled too, just ended up grabbing a grabbed the dewalt and torqued it, it’s still on there and functions great
Got the impact drill and washer and went to town three spins problem is that those damn cheap washers gouge by the bearing and make traction causeing the whole thing to spin
can it work on a Toyota Tacoma ?
I'm sure they have a version for your truck. Check out their site.
Mine only lasted about a year before it broke. I really liked it before it broke.
Sorry to hear that. How tight was it when installed? Did it have enough play?
Why I got this I have bags or a step stool in one hand now can open tailgate one handed!
It makes things so much easier.
You don't need to remove the limiter just take a mallet and flat head and flatten the tab
Thanks for the tip!
so can I still put weight on my tailgate like the back half of my atv?
Oh ya totally. The reverse shock doesn't change the carrying capacity of the tailgate.
Any retailers in Alberta/Canada??
www.amazon.ca/Krator-Tailgate-Support-Tailgate-Lowering-2009-2019/dp/B07Q47STDJ/ref=lp_9164039011_1_7?s=automotive&ie=UTF8&qid=1557953309&sr=1-7
You local truck accessory shop like CAP-It would probably carry it.