I would say 50-60k km but maintenance minder says otherwise. It will pop on the dash as "3" depending on ur driving behaviour. Light will come on from 50-120k km.
@@Cargorage thank you so much for your prompt reply, MM hasn’t come yet i drove 41000 miles, and i live in Minnesota where winter are harsh, should i wait for Maintenance sign?
The maintenance minder on the dash (sub 3) came on @ 81k km. That maintenance minder sub 3 will come on by itself depending on ur driving behaviour from 50-130k km.
Watching your videos makes me miss working at Honda.
Thank you for this video, couldn't get the 2 screw bolts of the shield. Had the same tools you have in the video and mission accomplished
No worries. You're welcome.
Very professional job
Thank you sir
Excellent video.
Thanks
great video, did not know there was a level plug! always did a drain & 3.75
Thank you 🙏
I’ve seen other video where they fill up the transmission fluid through another opening closer to the front, which one do we use?
As far as i know, that's the only fill plug i know about.
What size is the crush washer for the transmission bolt ?
18mm
Is there a filter for these transmissions that gets changed?
I believe there is, but you'll have to remove the transmission fluid pan to get to it.
After how many miles we should change cvt fluid in 1.5 accord EXL 2022?
I would say 50-60k km but maintenance minder says otherwise. It will pop on the dash as "3" depending on ur driving behaviour. Light will come on from 50-120k km.
@@Cargorage thank you so much for your prompt reply, MM hasn’t come yet i drove 41000 miles, and i live in Minnesota where winter are harsh, should i wait for Maintenance sign?
I do it at 60-70km, i dont't follow the MM.
How many miles were on the car when fluid was changed?
The maintenance minder on the dash (sub 3) came on @ 81k km. That maintenance minder sub 3 will come on by itself depending on ur driving behaviour from 50-130k km.
@@Cargorage Thx. At 43k miles on my 2020 Accord. Getting close.
How to know 36lbs?
Go buy and use a torque wrench.
@@Cargorage I mean your torque wrench.. How do you know is 36 ft lbs?
@@vieboi5483 set the torque wrench to 36 ft lbs then when your tightening, you will hear a audible (click) sound.
For first time trying to do my transmission you don't even explain what kind of tools are using
To remove the cover, use a flat head screw driver and #3 Philip screw. And the drain plug 3/8 square ratchet.
Thanks for watching.