I might be doing it wrong, but all I want is to be able let the client see the photos as they’re taken, while controlling the camera itself, not in the app
@@theCameraVille I want to control from the camera, and essentially the iPad would just being showing the pictures for review as I take them/for the client to review
@Hoss_VegasTTV after some quick Google searching you have a usb c hdmi connector which can be used in conjunction with either a USB-C to hdmi cable or Usb-c to Hdmi dongle
Yup! I find zooming in on my shots was very helpful for my product shots. I may test out the wireless version . I was told the app is fine but the camera can be tricky. Let me investigate. Brb🤝🤝
A capture card is a device used to record and stream video and audio from various sources, such as gaming consoles, cameras, or other computers. It acts as an intermediary between the source device and the display or recording system, converting the video and audio signals into a digital format that can be stored, streamed, or edited on a computer. Capture cards are commonly used by gamers, content creators, and broadcasters to capture high-quality footage of gameplay, live events, or other content for use in videos or live streams. They can be external devices connected via USB or internal cards installed in a computer's PCIe slot. The Ipad dont have this slot.
I use cascable - it does work well but the file system can be very slow. Especially when you have a lot of images on the camera. It sometimes takes forever to look through them - especially when a client is waiting. I am looking for a faster solution to the file system problem. Also some of the features on cascable are way slower then in the camera. For instance their bracketing feature takes forevor compared to doing it in camera - which means you have to disconnect and reconnect all the time. I am typically shooting on location fyi. In a studio this might not be that much of an issue. Just my 2 cents. I am running a Nikon Z6II.
At the end of the video I did continous shooting on a R5C, 45mp 9:25. Its uncut and seem very responsive. The bottleneck on your end is the CF express card . You need a fast cf express card. Cheers
Since you can connect the Nikon Z6ii directly to the iPad with a usb-c cable, why use the Anker hub between ? is it only for the possibility of recording on a separate card ? And why using an external power for the hub exactly ? And if so, what amont of power does it need ?
So I'm getting ready to photograph the upcoming total solar eclipse in N America. I have my Canon 80D tethered to my iPad 9th gen, running Cascable, works great. My question is can I use an external power source for the iPad while it's tethered to the camera? There's Apple Lightning to USB 3 Camera Adapter that plugs into the Lightning port of the iPad and has a power port and a usb c port on the other end but I'm not sure it allows data transfer and some reports say it tries to power the camera also and gets the error message " “Cannot Use Accessory, This accessory requires too much power".
This is issue is very in depth. I havent gone into an external power source yet with this set up. Im sure it is possible but I will have to test to see.
I’m using an iPad Pro with 17.5.1 ( latest update) every time I try tether it says ISO need’s to grant access but it’s got complete access and simple won’t connect. I normally use Lightroom classic to tether but thought this app looked so much easier.
Thanks for your suggestions ! But I wonder why using an expensive powered USB hub, is that really necessary ? I tried with a plain USB-C cable and it works just fine. Also notice that Cascable offers the WiFi feature to do the same tricks without the $50 tether cable
I cannot get the HDMI connection work on my Z9 Nikon. A regular USB cable works fine, but the app does not seem to recognize the HDMI cable. Is there a setting I'm missing?
I got the app just tried it on my iPad. Overall works great in my test, but is there a way for the camera I have Z8 to auto focus for self portraits and while connected to the app? Thx for the video!
Why does the USB-C hub need to be power? Is it to charge the iPad? I need a hun that can be used to transfer the video connection from the camera and also power the iPad. Otherwise the battery drains extremely fast.
@@raheimjackson3463 Snapbridge is for Nikon only. Adobe is monthly, no 1 time payment . I havent tried them because of that. Is this something you are interested. Let me know
@@theCameraVille Well.... yeah, that, too. But more that it can still offer a live, real-time preview. While recording would be even better. Thanks! Great channel!
Exactly what I was looking for.I own a Z6ll, and was hoping to be able to do something like this . Will this work with an older IPad Pro ? What cable were you using for the Nikon ?
Thank you so much for this amazing video! I am planning on shooting cooking videos and will need to be able to use this to monitor the quality of images, can this app show real time images while I am shooting with the camera? Thanks!!
Around 2:56 , That white cable that is connected to the reader is the apple USBC . Apologies for not being very specific but I used the Apple usbc cable that came with my ipad to power the dongle.
Is there a way to transfer just Jpegs to the IPad and not the RAW files? I would think this would speed of file transfer big time. I don't need to backup my RAW files because I find the two card slots in my camera to be more than adequate.
Great video!! Looking for a tethering options for my z6ii with my M1 ipad pro. I might use Capture One instead of Cascable. It’s a pity that lightroom mobile still can’t really do tether capture. I have a question. By using the power hub are you able to power the ipad pro as well? I do have my magic keyboard so I can probably charge my ipad pro using it but just wondering if I don’t want to use the magic keyboard, is there a way to do the usb tethering while powering the ipad at the same time? thanks!
Can you control the focus point? I've downloaded the app with my Z7 and iPad and only the center focus point seems to work. Ideally this could use the cameras built in eye-detect - not sure how to get it to do that.
@@theCameraVille ... while you're at it --- do you have a remote trigger? I was trying to get this setup to work for a cheap photo booth. The idea being I would give the guests the Nikon bluetooth wireless trigger to fire the shutter. But as soon as I plugged the USB-C cable in, the remote would no longer fire the shutter.
Question, when you use this app, can you just use it to view the pictures? And when you use this app, are the files/pictures being saved on the camera or on the iPad?.. Thanks.
Hey! It is only saved on the camera SD/CF . You can set it to the Ipad if you want. Yes, the app can view the photos on your card so no problem on that. Its quite fast surprisingly. Towards the end I used the R5 , 45mp and it seem to stream it just fine.
I appreciate this video! So frustrated with Canon Camera Connect wireless app. Been on with Canon tech support multiple times and they can't get it working so I'm turning to a tethered solution. Q: Do you always have to use the Anker Hub or is that just a way to keep the iPad powered for long shoots? Thank you so much! By the way, I'm on iPad 10 2023 with USB C.
They anker hub is to offload the images from my camera to another location as I dont want to offload in the Ipad. I am currently working on a wireless feature video for tethering. Same App. Its pretty fast and easy actually. Will brb and get this video going.
@@theCameraVille thanks! 2 things: If you tether direct to iPad without Anker, does it *have* to also offload to the iPad and not just to SD card in-camera? I only need this system to act as a preview monitor for art directors while I work. 2nd, I have tried using that Cascable app wirelessly with this camera and have the exact same connection problems I do with the Canon Connect app.
@@Ridgeback65 Howdie mate~! I just tested it to save on the SD card only and yes, you can do that as well. The orange cable is what I used to do it. ( I will make a video on this as there is dozen of questions) Now with the wireless, it works solid but I want to encounter your problem so let me know what model camera you have. Your setting of your room. How far is your device from the camera. I will plan a video on this separate so I can do testing for folks and see. This is a great question Scott~!
@@theCameraVille fantastic. Tomorrow I will provide those details about my wireless experience. Perhaps do a simple iPhone video of my process. Maybe that might reveal an issue or perhaps there is a problem with my protocol. Either way, perhaps it could help people.
Even when I plug the tether cable from my camera to my ipad Pro, the ipad cannot recognize the camera. Is there a certain model of ipad Pro I should be using?
Is there a way to do this wireless? I’d like to be able to shoot my patients and immediately put it on an iPad for them to swipe through their photos. Sorry for the noob question
I will test around and see what I come across. Several folks had told me they had it working on lightroom but it keeps disconnecting, not secure. I will see what I find out. Stay tune.
I might be doing it wrong, but all I want is to be able let the client see the photos as they’re taken, while controlling the camera itself, not in the app
So you are viewing from the app, but showing the pictures through the camera?
@@theCameraVille I want to control from the camera, and essentially the iPad would just being showing the pictures for review as I take them/for the client to review
@Hoss_VegasTTV what camera do you have? I know on cannons if you just want to review you can use the mini hdmi to hdmi and plug into any screen
@@PetersPorsches Nikon z6ii
@Hoss_VegasTTV after some quick Google searching you have a usb c hdmi connector which can be used in conjunction with either a USB-C to hdmi cable or Usb-c to Hdmi dongle
This is exactly what I need I photograph sale horses and stallions and being able to view immediately is so helpful
Yup! I find zooming in on my shots was very helpful for my product shots. I may test out the wireless version . I was told the app is fine but the camera can be tricky. Let me investigate. Brb🤝🤝
Bro I looked for this exact same thing all weekend. Thank you so much!
Glad I could help! I will be using this app as its very simple and straight forward.
@@theCameraVillehi sorry, does the picture will automatically go to phone gallery?
exact information I too was after. Thank you, sir.
Very clear video. Can you please explain why in this set up we don't need a capture card ? Thanks
A capture card is a device used to record and stream video and audio from various sources, such as gaming consoles, cameras, or other computers. It acts as an intermediary between the source device and the display or recording system, converting the video and audio signals into a digital format that can be stored, streamed, or edited on a computer.
Capture cards are commonly used by gamers, content creators, and broadcasters to capture high-quality footage of gameplay, live events, or other content for use in videos or live streams. They can be external devices connected via USB or internal cards installed in a computer's PCIe slot. The Ipad dont have this slot.
I use cascable - it does work well but the file system can be very slow. Especially when you have a lot of images on the camera. It sometimes takes forever to look through them - especially when a client is waiting. I am looking for a faster solution to the file system problem. Also some of the features on cascable are way slower then in the camera. For instance their bracketing feature takes forevor compared to doing it in camera - which means you have to disconnect and reconnect all the time. I am typically shooting on location fyi. In a studio this might not be that much of an issue. Just my 2 cents. I am running a Nikon Z6II.
At the end of the video I did continous shooting on a R5C, 45mp 9:25. Its uncut and seem very responsive. The bottleneck on your end is the CF express card . You need a fast cf express card. Cheers
Can you just use the USB-C to USB-C tether cable directly to your IPAD or PC instead of going through your USB-C HUB...
Will make a video for responses. Thanks~!
Can you plug the camera usb-c directly into the ipad and control it?
Yes you can but others are saying no . Im not sure of the ipad model / os version you are using but the m2 works without it but some needed the hub.
can you connect the app and camera via Wi-Fi?
Great question. I will test.
Yes, you can
Since you can connect the Nikon Z6ii directly to the iPad with a usb-c cable, why use the Anker hub between ? is it only for the possibility of recording on a separate card ? And why using an external power for the hub exactly ? And if so, what amont of power does it need ?
Alot of great questions~! I will try to do a reply video on all these question as I didnt expected this amount of volume.
So I'm getting ready to photograph the upcoming total solar eclipse in N America. I have my Canon 80D tethered to my iPad 9th gen, running Cascable, works great.
My question is can I use an external power source for the iPad while it's tethered to the camera?
There's Apple Lightning to USB 3 Camera Adapter that plugs into the Lightning port of the iPad and has a power port and a usb c port on the other end but I'm not sure it allows data transfer and some reports say it tries to power the camera also and gets the error message " “Cannot Use Accessory, This accessory requires too much power".
This is issue is very in depth. I havent gone into an external power source yet with this set up. Im sure it is possible but I will have to test to see.
I use the lumix sync app for ow. Would test this app too
You should🫡🫡🫡🫡
Is tethering cable different than using hdmi cable when connecting with an iPad?
Correct. You will need a tether cable~!
All you need is a USBC cable, you don't have to buy their ridiculous tethering cable
Can I connect 5d mark 3 with iPad Air 5th gen ?
Here is the support list compatibility.cascable.se/canon/
I’m using an iPad Pro with 17.5.1 ( latest update) every time I try tether it says ISO need’s to grant access but it’s got complete access and simple won’t connect. I normally use Lightroom classic to tether but thought this app looked so much easier.
What cable do you have ? Also have you tried the wireless path?
czcams.com/video/SHVeepr6gOQ/video.html
Thanks for your suggestions ! But I wonder why using an expensive powered USB hub, is that really necessary ? I tried with a plain USB-C cable and it works just fine. Also notice that Cascable offers the WiFi feature to do the same tricks without the $50 tether cable
Yes I made a video on the wireless portion if you need that but its slightly slower.
czcams.com/video/SHVeepr6gOQ/video.html
Cheers
That's need tether cable? Can I use cable USB type A to type C? It's work or not?
Are you asking can you use USB Type A to Type C?
@@theCameraVille Yes or type C to type C thanks
It works! Thanks so much for solving this.
Glad it helped!
Looks like a great app. Can you control exposure settings in camera instead of using the app on your Ipad?
I will answer your question in a follow up video as I am gathering questions for it~!
I cannot get the HDMI connection work on my Z9 Nikon. A regular USB cable works fine, but the app does not seem to recognize the HDMI cable. Is there a setting I'm missing?
That is different setup since it has different menu than z6ii. I may have to do a video with my z8 since its same menu
I got the app just tried it on my iPad. Overall works great in my test, but is there a way for the camera I have Z8 to auto focus for self portraits and while connected to the app? Thx for the video!
I have a radio trigger for the nikon Z8 🫡🫡
Thanks for the information.
Any time!
Why does the USB-C hub need to be power? Is it to charge the iPad? I need a hun that can be used to transfer the video connection from the camera and also power the iPad. Otherwise the battery drains extremely fast.
BINGO. Someone at least is paying attention lol. You dont need the Hub if you want to go untether, but yes it drains.
this is awesome. Thank you. Isn't there a way to do this wireless?
They do have a wireless app. I never tried it but I will look into it.
can't photoshop do the samething? what about snapbidge?
@@raheimjackson3463 Snapbridge is for Nikon only. Adobe is monthly, no 1 time payment . I havent tried them because of that. Is this something you are interested. Let me know
@@theCameraVille I have adobe Lightroom I’m currently trying to figure out how to use my z6 with my iPad Pro gen5 wirelessly
Hello dear can you tell me about open settings camera z6ii to connect for iPad dear thank you.
I didnt adjust anything in my camera. It was plug and play . Are you having issue?
Can it work without the Anker? Why can't the tether cable be plugged straight from camera to iPad?
excellent question
Why do you need the hub? Can it connect directly to the ipad?
making a follow up video to these questions❤️❤️🫡🫡
Does this work for video, as well?
Do you mean control the stop and record?
@@theCameraVille Well.... yeah, that, too. But more that it can still offer a live, real-time preview. While recording would be even better. Thanks! Great channel!
Exactly what I was looking for.I own a Z6ll, and was hoping to be able to do something like this . Will this work with an older IPad Pro ? What cable were you using for the Nikon ?
The cable are listed down below ~! Usbc . Yes . I believe it can. how old is your Ipad. I saw folks using it on their M1 Ipad.
Thank you so much for this amazing video! I am planning on shooting cooking videos and will need to be able to use this to monitor the quality of images, can this app show real time images while I am shooting with the camera? Thanks!!
Yup! It can be used as a live view monitor.
can i use dual lighting splitter ? 1 is for tether & 1 is for charging use as together....
My Anker can but it needed a PD. I believe it needs a PD.
Thank you sir @@theCameraVille
Would the apple usbc to usb c work. I bought the one you recommended and I couldn’t get the sd card reader to work
Around 2:56 , That white cable that is connected to the reader is the apple USBC . Apologies for not being very specific but I used the Apple usbc cable that came with my ipad to power the dongle.
Is tethering cable different than the cable that come with my camera?
Which brand / camera model are you refering? Let me check
Is there a way to transfer just Jpegs to the IPad and not the RAW files? I would think this would speed of file transfer big time. I don't need to backup my RAW files because I find the two card slots in my camera to be more than adequate.
This will be great for a follow up video~! Stay tune.
Hey Great Video! Can you use it as an external monitor during video shooting with the Z6ii as well?
Let me do a follow up with you. Brb~!
@@theCameraVille Thanks!
neither of these fit my Nikon camera OR my I pad ports....
What camera / ipad do you have?
Can ones connect also a Z5 Nikon to iPad?
I believe so but what Ipad model do you have?
Does it work with Iphone too? If so what kind of cable?
czcams.com/video/SHVeepr6gOQ/video.html
Cheers
any specific setting on camera? my camera is Z8
Possible future video as I have the z8 as well and the option may different because its like the z9 menu almost.
Great video!! Looking for a tethering options for my z6ii with my M1 ipad pro. I might use Capture One instead of Cascable. It’s a pity that lightroom mobile still can’t really do tether capture. I have a question. By using the power hub are you able to power the ipad pro as well? I do have my magic keyboard so I can probably charge my ipad pro using it but just wondering if I don’t want to use the magic keyboard, is there a way to do the usb tethering while powering the ipad at the same time? thanks!
Oh capture one ? I will demostrate in a follow up video!
@@theCameraVille great!!
Can you control the focus point? I've downloaded the app with my Z7 and iPad and only the center focus point seems to work.
Ideally this could use the cameras built in eye-detect - not sure how to get it to do that.
Let me give it a try, will follow up with you after.
@@theCameraVille ... while you're at it --- do you have a remote trigger? I was trying to get this setup to work for a cheap photo booth. The idea being I would give the guests the Nikon bluetooth wireless trigger to fire the shutter. But as soon as I plugged the USB-C cable in, the remote would no longer fire the shutter.
Literally doesn’t work for me, Nikon z7ii won’t connect.
What ipad and ios do you have?
Hi ! Good video! Btw what is the name of the app that you use ?
cascable.se/
I am currently working on wireless tether so stay tune~!
Question, when you use this app, can you just use it to view the pictures? And when you use this app, are the files/pictures being saved on the camera or on the iPad?.. Thanks.
Hey!
It is only saved on the camera SD/CF . You can set it to the Ipad if you want.
Yes, the app can view the photos on your card so no problem on that. Its quite fast surprisingly. Towards the end I used the R5 , 45mp and it seem to stream it just fine.
@@theCameraVille That's perfect, thanks man! Seems like easy to use, much easier than the Nikon app for thethering lol
@@theCameraVille BTW, which one do you think is easier and faster, this or capture one or the Nikon app?
I appreciate this video! So frustrated with Canon Camera Connect wireless app. Been on with Canon tech support multiple times and they can't get it working so I'm turning to a tethered solution. Q: Do you always have to use the Anker Hub or is that just a way to keep the iPad powered for long shoots? Thank you so much! By the way, I'm on iPad 10 2023 with USB C.
They anker hub is to offload the images from my camera to another location as I dont want to offload in the Ipad. I am currently working on a wireless feature video for tethering. Same App. Its pretty fast and easy actually. Will brb and get this video going.
@@theCameraVille thanks! 2 things: If you tether direct to iPad without Anker, does it *have* to also offload to the iPad and not just to SD card in-camera? I only need this system to act as a preview monitor for art directors while I work. 2nd, I have tried using that Cascable app wirelessly with this camera and have the exact same connection problems I do with the Canon Connect app.
@@Ridgeback65 Howdie mate~! I just tested it to save on the SD card only and yes, you can do that as well. The orange cable is what I used to do it. ( I will make a video on this as there is dozen of questions)
Now with the wireless, it works solid but I want to encounter your problem so let me know what model camera you have. Your setting of your room. How far is your device from the camera. I will plan a video on this separate so I can do testing for folks and see. This is a great question Scott~!
@@theCameraVille fantastic. Tomorrow I will provide those details about my wireless experience. Perhaps do a simple iPhone video of my process. Maybe that might reveal an issue or perhaps there is a problem with my protocol. Either way, perhaps it could help people.
czcams.com/video/SHVeepr6gOQ/video.html
What Nikon z611 camera setting did you use to get Cascable to work? I couldn't find a tether connection option on my camera. Thx.
Nikon Z611 ? Which model do you have?
Sorry its the Nikon Z6 2 @@theCameraVille
Even when I plug the tether cable from my camera to my ipad Pro, the ipad cannot recognize the camera. Is there a certain model of ipad Pro I should be using?
@@lesterfong2838 what version ipad do you have?
What if you have an older (Lightning) iPad, without a USB C?
Can Cascable do Live View?
There's an app for android tablet users too? 😢
I'm sorry. I believe its an IOS app only. Let me contact them and see if there is plans for android.
It Work also for vidéos shooting ?
I can make a video and see. Stay tune
@@theCameraVille thank's a lot for your answer, i'll try
How do you star rate your photos?
Great question, I shall add this to the list of to do on my next tutorial.
What ipad are you using?
M2 ipad 12.9”
work on nikon z50 bro??😢
cascable.se/help/compatibility/
Yes
What did you use to power the Anker hub? (the white cable)
USB-C cable that came with the ipad.
@@theCameraVille Ooh ok gotcha - thanks so much! This was a really helpful video🙌
@@ktktoo8462 Not a problem~! Its a great app. I was in the market and thought it would be nice to share my find. Works great~!
@@theCameraVilleI have an iPad with lighting cable interface... is there a hub that I can use that connects to lightning instead of usb-c?
Kills me you cant shoot tethered with canon r6 mark 2.
I have Canon R6 Mkii. I can take a look.
damn nice!!
Yup! Still works great!
dopeee
All good! I hope you enjoyed it. I also did a wireless tether video as well. Check it out~! czcams.com/video/SHVeepr6gOQ/video.html
Why powered
If you want your unit powered. If not, run off battery🫡
Actually you can do wirelessly without cable
Yup but stability is questionable. Also you will use up camera battery.
czcams.com/video/SHVeepr6gOQ/video.html
Is there a way to do this wireless? I’d like to be able to shoot my patients and immediately put it on an iPad for them to swipe through their photos. Sorry for the noob question
I will test around and see what I come across. Several folks had told me they had it working on lightroom but it keeps disconnecting, not secure. I will see what I find out. Stay tune.
czcams.com/video/SHVeepr6gOQ/video.html