DIY knife with brass accents and black walnut handle

Thank you for joining me on my channel!
This time I'll show you how I made my first knife.
I think it's a nice all-purpose knife.
I used black walnut and brass for the handle.
The handle wood is glued on and riveted with brass pins.
The blade is 190mm long, 5mm thick and was finally polished.
If you missed the hardening in the video, you're right.
Unfortunately I used a non-hardenable type of stainless steel.
I won't make this mistake a second time!
A stainless, martensitic, nitrogen-alloyed chrome steel would have been more suitable.
But nonetheless it is a beautiful knife.
Feel free to write me your experiences in the comments about which types of steel you prefer to use.
I'm really looking forward to your visit and see you next time!
Don't forget to like and subscribe.
Technical data:
Steel: stainless steel 1.4301 (not hardenable!)
Total length: 350mm
Handle length: 160mm
Blade length: 190mm
Blade thickness: 5mm
Weight: 567g
Handle: Black walnut, riveted with brass pins
Guard: Brass (riveted and polished)
Advertising - tools (used/similar):
* amzn.to/3RFBB2u Angle grinder
* amzn.to/48wMVoE Cordless screwdriver
* amzn.to/3NGZ8iw HSS-E drill
* amzn.to/48u46ak Countersink HSS-E
* amzn.to/4axO9BQ Belt sander
* amzn.to/474Tg9W Sanding belt
* amzn.to/48yjNxm DeWalt panel saw
* amzn.to/3GVxWsu Bench drill stand
* amzn.to/3ve8PP1 Water sandpaper
* amzn.to/48csv4j Polishing paste
* amzn.to/48wMVoE Polishing paste
* amzn.to/3ve8PP1 Polishing attachment
Advertising - material (used/similar):
* amzn.to/3GlEGQb Brass 25x8mm
* amzn.to/3Gjwujd Brass Round
* By purchasing via the Amazon link, you support my channel at no additional cost to you (affiliate link). The products are suggestions.
Video Chapter:
***************
00:00 - Intro
00:15 - Knife design
01:00 - Drilling holes for brass pins
02:12 - Cut out the outline
05:07 - Grinding
07:27 - Make brass elements
14:30 - Rivet brass elements
17:15 - Glue on the wooden handle
20:20 - Grind the handle
22:19 - Brass pins on handle
23:45 - Polishing
24:14 - Sharpening
24:50 - First cut
25:13 - Everything ready
Thank you for using the following music, endcard and clips!
Music:
*******
Mechanolith von Kevin MacLeod unterliegt der Lizenz Creative-Commons-Lizenz "Namensnennung 4.0". creativecommons.org/licenses/...
Quelle: incompetech.com/music/royalty-...
Künstler: incompetech.com/
Endcard:
*********
youtube-25102.mp4 - StreamRender
Clips:
*****
button-subscribe-112699.mp4 YRDesigns
subscribe_-_50759.mp4 Mohamed_hassan
DISCLAIMER:
The information provided on this channel is for entertainment purposes only. Always wear the appropriate safety clothing and follow the instructions for the respective machines. Any action you as the viewer takes upon the information on this channel is strictly at your own risk, and "Stahl und Rauch" will not be liable for any losses, damages, or personal injuries in connection with the use of this content (including injuries, damages, or losses sustained while you were trying to emulate the actions and projects on this channel). Any attempt to reproduce the actions or projects suggested by this channel should not be made without training and is done at your own risk.

[@MASI_forging]

Outstanding workmanship. The knife looks good 👏👏

[@StahlundRauch]

Thanks a lot

[@donaldcommissari2156]

Schönes Messer, tolle Arbeit aber wann wurde die Klinge gehärtet?

[@StahlundRauch]

Vielen Dank. Leider habe ich einen nicht härtbaren Edelstahl verwendet. Dennoch habe ich beschlossen das Messer fertig zu bauen. Ein Hinweis dazu ist in der Videobeschreibung zu finden. Dieser Fehler wird mir kein zweites Mal passieren.

[@rt9934]

Very good workmanship. Pity about your choice of steel. It would have been a great knife if it could have been heat treated.

[@StahlundRauch]

Thank you. I grow with my tasks, but sometimes my tasks grow faster than me. 😀 I have already purchased the steel for my next knife. It has the name Nitro-V. Stay tuned.

[@angellabuelo9930]

It has had no final heat treatment that has been seen after all the heating that the knife has undergone. It will break in half.👎🏻👎🏻👎🏻👎🏻🥵

[@StahlundRauch]

Thank you for your comment. Unfortunately I used a non-hardenable stainless steel. But I decided to finish building the knife. A note about this can be found in the video description.