Bosch Hammer Drill Refreshment | Bosch GBH 2-24 DSR disassemble
Vložit
- čas přidán 17. 12. 2019
- Bosch Hummer Drill Refreshment Video
I hope you find something useful & enjoy this video!
I am happy to receive your feedback, advice, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
**I still keep some parts, I want to save the world's environment**
--------------Thank you so much for Likes & Comments-------------- - Jak na to + styl
This is the 5th tile project we've done where we've removed the old tile before installing new tile, and the first one with this tool czcams.com/users/postUgkxqqoaX03nrziKwF7Bjjcc71YzLEleMvOS . I want to cry for all the unnecessary work we've done in the past. With this tool, we removed tile surrounding a fireplace, as well as the hearth tile, set in loads of cement, in less than an hour. I highly recommend this tool. It was easy to use, and very satisfying watching the tile literally fall off the wall.
OK, I'm officially addicted :D the way you showed how it's working - awesome!
Applying grease with a butter knife is my favorite part of your videos. Keep up the great work!
One of the best drills and a testament to 90s/00s Bosch Engineering. I donated one of these to a friend (it still works) hoping he'd do some similar refresh.
I love it when you see how these things work internally. Great videos!
Tengo este mismo y se dañó el reten del mandril por lo que tira la grasa hacia adelante y mancha las brocas, en Argentina no me inspira confianza ningun servicio tecnico, con este video me animaré a desarmar y reparar yo mismo, eres muy aplicado y generoso con tu conocimiento, muchisimas gracias por el aporte! Saludos
The best service video including basic short-circuit checks I have found. I only miss a resistance verification of each stator and rotor coil in case it was burned.
Thank you, I like no-words and fast-speed videos when it is obvious, what is being done...
👍
AWESOME!!!!! That was a lot of work and dedication....
Another great restore. 👏👏👏
I love the way that you make these better than new. Keep up the good work.
How did he make it better than new? Unless the new bearings are better than the old ones when they were new, all he did was clean it. The wear and tear on the exterior is still there.
This was merely a service, not a restoration.
Henrik Paulsen get a life will you. All I meant is it probably didn’t look this good when new. Get over yourself and let me complement how I wish to and butt out.
Man i am from Brazil,not speak english
I am Very emoting from This vídeo,myself work,have today have today os here!
Living and Brazil and working from this equipaments,Bosch,Makita Black e Decker
De walt every day
My First work (8 years)
You is awesome,amazing
My inspiration!
When you see a perfect Video for a perfect Drill! :) Thanks! It helps me to repair my 28 Year old GBH
I am glad it helps you.
Watched all of it, perfect . Waiting for the next drill.
areglo de maquina atorada
زگث٢
Well done and time and money well spent for the repair. This is an awesome tool! Lightweight, powerful and very universal. It even has a left/right switch what is seldom found today. Love that when the drill gets stuck or for heavy screws. This model is about 30 years old and way better than many modern tools.
Gracias a este video pude realizar mantención a mi rotomartillo y quedó muy bien en las pruebas. Mañana lo usaré para instalar unos 4"×4" de acero en concreto. Gracias !
De nada, me alegra que te ayude.
I have a same one. I did a refreshment to it myself inspired by this. Thankyou
Sorprendido de la manera como lo desarmas y lo vuelves armar, todo un profesional, felicidades
Perfect JOB !
Thanks for the video. I've completed disassembly of my newly purchased used ghb 2 sr, which looks identical to this one. Need grease and a few screwa that were missing. Thanks again.
Thank you man , you are wonderful.
I have to admit, I wasn't as fired up about this one. However, I like your work so I watched. THEN I got to 6:38 and I loved it. Boom. That's what I want to see. I wish you'd take a couple of these and show what settings you use for continuity tests, what you test, and why. Really give a full class on testing old machinery. It'll get the most watches as we come back and watch it numerous times to learn what you do.
Qka 05
Excelente Trabajo mi Amigo... Saludos y Abrazos desde Venezuela!!!
Now I know how to service mine. Thank you.
Panie ty jesteś człowiek magia
Nice restorations men !! Greetings from Central America 👋
Great job👌
I don’t think I can still re-assemble if I try to Dismantle to clean my Bosch hammer drill the same model of this one. Great skill. Thanks for the video
Thanks for this video.very good job
Very good!!! 👍👍
Amazing 🤩
Ótimo vídeo! Obrigado por mais esta aprendizagem
Nice to see makita. Great job
Excelente video, muy detallado todo
thank you from France
:D
Awesome 👍
Thanks man. I was finally able to fix my tool by watching this video! Amazing! Right to the point!
You're welcome!
@@gear_show armature bosch dre 24 can replace with dre 26 armature?
Perfect !!!!!! Thanks
good job!
Thanks you so much
Good work
Desde Argentina....Muchas Gracias por tu ayuda! Pude reparar mi Bosch Hamer GBH 2-28d. Un fuerte Abrazo!
It's a very good job about the repairing this device.
Fantastic drill that
ho, you're so good at it.
Excelente video gracias por compartir saludos.
Perfeito Parabéns.
parabéns cara seus videos são ótimos
You are great sir
Exelente!!👏👏👏
Top Job...
Excelente video
Hi Gear Show 👋👋👋very very good restoration drill 👍👍👍💣👌🏽
uuijhuu
Wow, I had absolutely no idea my hammer drill was made like this.
o cara e brabo
Good job buddy
A very good tool
Good work
Mis felicitaciones por este magnífico video, gracias.
¡Denada gracias!
Dziękuję, dobry film instruktażowy.
Pozdrowienia z OKUPOWANEJ POLSKI
👍
Goooooooooooood Working
VERY GOOD , THIS FILM IS THE NUMBER ONE
OH, Thank you so much!
Eres muy bueno, FELICITACIONES !!!!!!
Thank you!
Nice tear-down video you got there Sir. I made a tear-down video of Workzone Hammer drill but i wasn't able to put it back, but still At least I saw whats inside it. hehe. lesson learned
Try selling it spares or repair on eBay.
Very good
Awesome
That thing was beyond filthy!!!!!
Hammer drills sometimes get like that from standard use. Not saying abuse.
Даёшь 2 жизнь технике, молодец!
Dhhfyvuv ibivguv erfvg 356 ? Hcuccyuvcujjj gufuduwbbv 4666;
Yudydxj !!!!!
Very interesting .
Glad you think so!
Very nice explan tq sir
Damn, destroyer
Good jobعمل جيد
Good 👍👍👍
Using a Makita to pull a Bosch apart..genius!!
All great. Though it would be best to clean up the commutator with a fine polishing pad just a bit, not too much to conserve surface roughness. Sanding it may affect proper commutation and reduce motor life.
Excellent
Why is it always a mechanical fault dealt with? I have an electrical fault,possibly a component ,but no videos on this!only mechanical.Can someone show how to test components on a GBH 2 SR 620W hammer drill! Thanks.
Exelente trabajo lo felicito ,lastima que no sea de Argentina ,porque tengo uno para reparar !!!
Мощно.
Gostei uma boa aula
Goooooooooooooooood
Thank you, 👍, I have this 👆, as well as the screwdriver you're using. Makita
"I have tools to fix tools, arh arh arh..." - Tim the Tool Man Taylor
How can I get the rear cover of an old Draper mains hammer drill.? I can't see how to take off the cover that sits in your palm without busting it. 🤔
Спасибо!👍
hey the little ball bearing that is used to lock the bit know where i could get them
好野:-)
👏👏👏👏👏👏👏💪💪💪 parabéns ótimo trabalho
Quedó como nuevo
How old is the tool?
Not that old really, just seen a fair bit of use. The 2-24 model is still in production.
شكرآ لكم
Thanks
very complicated, so many components, if I could forget how to restore it properly 😄
Good
Hi! Great video! What grease did you use to put on the gears?
Barakalla
رائع
What do you use to clean old grease and housing?
That is a cool movie and i can maintain my machine well. But what i want to ask is, how do you wash the gear? Is that laundry - washing powder and water ????
Απίθανο τρυπάνι τό έχω δουλεύει 35 χρόνια
Hi i am same with this ,my normal mode is ok but hammer drill will knocked the case any ways to fix?
Hola, en el pistón no lleva ningún lubricante?
Bosch kalite
Thank you for sharing your wonderful videos I am from South Africa where are you from please?