DIY : ) How to make small portable display TFT 7-inch LCD AT090TN10 with HDMI, AV and VGA input
Vložit
- čas přidán 21. 02. 2022
- in this video we are making an small display using TFT 7-inch LCD that can supply with batteries and 12vdc adaptor.
we will start from the beginning to the end and we explain every part of this.
((((this system is safe for kids and people who have no experience in electrical stuff.)))
Requirements:
TFT 7-inch LCD RGB 50pin (AT090TN10)
TFT 7-inch frame
4 x 3.7v batteries
TFT LCD display board (find a board with HDMI input and audio output)
Box!
you can find all file including 3D object from the below link:
drive.google.com/drive/folder...
if you need on of this display right now... you can order it from my telegram account:
@curiousguy1990
Subscribe and let me know if you have any idea...
Hope you enjoy and Good Luck...
Im loving the in depth info sir! Thanks!
Well thanks now I’ve been humming We WILL We Will ROCK YOU!
Can I make it seamless, at least on the left-right bezel?
Hey Man! I have a project to buy LCD screens of 15" that can be used by children as a 24/7 school module in villages far away. I want to cost less than $200, use solar power, 12 nice lithium cells, a super tough glass on top of the LCD, and a standard laptop touchpad with cellotape and 3 wires in case we should change the touchpad. The idea is that 3-5 kids can learn from thousands of books for about 10 years until the system breaks. everything is locked in cheap steel frame and metal-cement housing so it stays in one place. what do you think?
It's a very good idea actually, there is lots of driver and LCDs in the market. and driving them with solar panels won't be a problem. just use a higher input voltage, it's safer since you wanna bury it. :)
hey man.. i have an old portable dvd player.. the dvd board is not working but i think the 7 inch lcd screen is still work but the problem is which controller board i need.. it has 24 pins ribbon cable..
Look for a codename from your LCD screen and search for its driver online
@@cybercrazetech8020 i already did that before asking people on every website i know.. found nothing.. ill just trash my project...
@@gyrenrockz 🤣u sure there's not at all a sticker on the LCD that tells the information?
@@footunjing947 im not gonna waste your time neither mine... i tried and im tired..
I have one of those LCDs, unfortunately, their driver is not digital,(NO RGB or LVDS input) it takes a lot of time to figure it out, but the best way is to analyze the main board of the DVD player and its ICs.
I have 39pin tft small screen can i do this to
you must find the datasheet, but if its a smaller size,, you probably can.
Can I use this in video brochure?
feel free to do that
سلام و تشکر
یک دی وی دی پرتابل هست که خراب شده اما مانیتور 7 اینچ ان سالم است(HN-HSD070AL-REV 03)و یک کابل فلت 26 پایه به ان وصل می باشد من میخواهم از این مانیتور فقط به عنوان ورودی تصویر av استفاده کنم حالا از این 26 پایه کابل فلت چگونه تشخیص دهم که کدام تغذیه برق و کدام ورودی تصویر av است لطفا راهنمایی کنید
Hello and thanks There is a portable DVD that is damaged, but the 7-inch monitor is intact and a 26-pin flat cable is connected to it. I want to use this monitor only as an av image input. Now, how can I identify this 26-pin flat cable? Which is the power supply and which is the av image input, please advise
سلام
من یک مانیتور 7 و 9اینچی دارم که 26 پین ورودی دارد(HN-HSD070AL- REV:03-A00
HSD0901CW1-A00
از ان فقط برای ورودی تصویر av می خواهم استفاده کنم شما کدام برد کنترل را برای انها مناسب می دانید؟
ভাই আপনাৱ আমু নাবাৱ দেয়া যাব
سلام استاد فاری حرف بزنی بهترنیست ؟
حالا باید انگلیسی ضبط می کردی
فارسی