I’m not convinced the pin makes huge difference. Others said they used heat to remove it..I think the co2 restrictor holds the biggest increases. Thanks for the vid.
Your videos keep getting sharper and sharper L🔪 Could have sworn you faded to black in the first segment😁Would love to see you get a reading on her! Maybe a heavier ball?? 🤔 I just checked out your homemade ammo video, Very nice brother!! You should mosdef hook some up and revisit this one. ✌️🙏💯💪
They lock tight those pin's in the only way to get them out is heat from a torch or heat gun. All i ever did with mine was change the regulator valve to the 11 joule from the stock 7.5 seems powerful enough for me cracks coconut
Very odd that the 7.5 joules version had a restrictior disc in it already. I have an og version from three years ago so maybe it's different now but I don't recall a disc...only in the 11j. Try using heat to remove the pin, this should loosen up the locktite. Great build LLC 💯👊👍👍
7.5j come no disc. That's why they sent one because without the valve it will fart if you don't install the disc. But the 7.5 hasore room to hold CO2 so the upgrade is more powerful when done to the 7.5. It really is an awesome setup.
Great video content My friend+ I think the setup/ furniture you had taken off looked badass! Can you please tell me the info on the optics and light? Does the light have a laser top? Anyhow, great job bro.... 😎👍
Hey bud, great great vid content. Always watching. Hey i got 100 4grm riotballs for my fully moded tr50 and they fall right through the cylinders chambers. Are the tuning cylinders what i need are the wholes on them smaller or? Thanks for any advice? 🤘😎👍💥
Thanks for watching! So what you need to do is size your projectile to your barrel. It could be .50, .510, .49. See what I'm getting at? I'm not quite sure what the stock bore size is. In my tuning barrel, I use 1/2 inch (.50 cal). Hope this helps💥💥💥
Nice power 💥. Congratulations. Now you have a hand-cannon💥👍. Take care and happy shooting my friend 👍😃. Btw , no need to change the pin. You will only get max 1 joule more power with a shorter pin 😉
Nicely done....Go check out the huben gk1 pistol .25 cal.. it's a beast 💪I do want to get the one you're showing but it's just not even close... I spent a pretty penny for it but it's worth it 👌
What screw driver can I use for the TR50? I have 3 screws around the top barrel that won’t budge. I’m trying to take out the valve block and put in a new barrel
I used the mini screw driver kit. It has like 5 or 6 on it. Red case clear top. I think they are made for repairing eyeglasses. Use the Phillips head💥💥💥
If you put the Chronograph in the same place with a barrel extension you will have no measurements it is just logical serious it takes into account the departure out of canon. It's as if you put it behind you when it is normal put it towards the end with you have extension barrel you will have you are measures xD 😮😅
Good mod. Not the complete factory mod, but then, looks like it isn't required. Solo the valves is enough. I dont think you need the extra barrel. It definitely did had more inertia power as it not only dented the pan but also seemed to have a larger push dent around the strike position. Predator metal pellet is boing to do some real damage up close. Fatal to head shots. But with the light ball you were using...it is going to take a real determined dude to try and get through 3 rounds never less the full six. Bruise like fuk!
@@thellc24-7nice video though, I pulled mine apart a couple weeks ago before getting the power kit together so now I’m looking to make sure I put everything back correctly. I also suggest the Mercury rise torpedo 50, and the umarex 68 cal 16 joule. Both hit hard out the box and you can play with all kinds of ammo!
@@thellc24-7nice- did you tune up hdr68 from the stock or 16J? Mind sharing how? I have both and would love to make them cannons. I also like the decimator rounds, steel balls, and ammo from cordodo
Skip the short pin or at very least do it absolutely last. The shorter pin has proven nothing in terms of gains so far. Still amazes me how consistent unmodifed markers perform. Can wait to see your results. Doh! I should finish the video before commenting 😂 Good test. Its another thing i havent tested with is a co2 restrictor. Not bad at all.
I think there is an adapter that requires you to drill a hole in the back for an adapter. It's for the HDP50 I believe. Also, I have this video: czcams.com/video/3ZieFp_1-MQ/video.html Thanks💥💥💥
It appears you have a "RED" button chrono which only goes up to an fps of 399. So, the reason you may not be getting a velocity reading post mod, is potentially due to the fps exceeding 400 fps. The "Yellow" button version (almost) reads velocities to 700 fps.
Are there any details videos in English to do upgrades on this? I sent mine out for a total of 164 to get it to 20 joules. Not trying to do that again andter 3 months of waiting lol
I am looking at something for home defense. Where I live obtaining guns and licences is not easy. I was looking at this or a crossbow. Would welcome opiions. Thanks!
If those are your only options, do not pick the crossbow. You want to be able to send multiple shots in a short period of time. It takes a long time to reload a crossbow unless you find one that has a mag and can auto-index the projectiles 💥💥💥
@@thellc24-7 You should try it again with the chrono holding on at the end of the actual barrel. As the projectile keeps accellerating along the barrel...
You clearly have no idea what you are talking about. My unmodified HDR50 with Devestator Rounds knocks a hole in a tree deep enough to put my pinkie finger up to the first joint in. If you get shot at Close range by an Hdr50, it will mess you up.
I love the barrel target set up!!! Thanks for the video!
Thanks for watching 💥💥💥
I’m not convinced the pin makes huge difference. Others said they used heat to remove it..I think the co2 restrictor holds the biggest increases. Thanks for the vid.
and it can be drilled out to 1mm anyway without kit
Two of those duel wielding is a force to be reckoned with idgaf good stuff bro bro 💯
I may get another 50 to keep stock for pepper💥💥💥
@@thellc24-7 def and the acid bath rounds lol jk
Very nice and creative pellet trap brother. Earned my sub.💪🏼
Thanks! Much appreciated 🙏🏾. More to come💥💥💥
Your videos keep getting sharper and sharper L🔪 Could have sworn you faded to black in the first segment😁Would love to see you get a reading on her! Maybe a heavier ball?? 🤔 I just checked out your homemade ammo video, Very nice brother!! You should mosdef hook some up and revisit this one. ✌️🙏💯💪
Yes. I did do a fade. I hit stop instead of pause so I had to put it together. Hahaha. Plan is to revisit the homemade stuff in a future vid💥💥💥
Love the target barrow you made
Thanks 💥💥💥
I'd like to see a chrono reading. It appears to be quite powerful.
T-M4 mount for the HDR 50 • by Toursekev looks awesome. Have the longer barrel and the P2P HDR 50 Launcher.
Yes. I have seen this. It is in oreorder status atm💥💥💥
They lock tight those pin's in the only way to get them out is heat from a torch or heat gun. All i ever did with mine was change the regulator valve to the 11 joule from the stock 7.5 seems powerful enough for me cracks coconut
Can push em out with a soldering iron as well, that way you heat the pin and the loc tite melts.
Yep 👍🏻 they are more effective like that.I have done the same to mine.
nice job , Its amazing that 1.2s hit that hard 🤨
the screw in the chamber st uck you needed to heatit up first it has loctite 243 on it ...then is comes out you can always order a just that part.
Yeah. I know. The head is now ruined, so there's no slot for a screwdriver anymore. Changing the pin won't make that much of a difference anyway 💥💥💥
Very odd that the 7.5 joules version had a restrictior disc in it already. I have an og version from three years ago so maybe it's different now but I don't recall a disc...only in the 11j. Try using heat to remove the pin, this should loosen up the locktite. Great build LLC 💯👊👍👍
I'm not going to bother with the pin. It's not going to be much of an increase in power. But, I'm not done with it yet💥💥💥
The 7.5 doesn't have the disc in the handle,all you had to do was take the block out
would the tr50 7 joule even fire with the disk in and restrictor, it’s also not threaded so i think its a mistake
7.5j come no disc. That's why they sent one because without the valve it will fart if you don't install the disc. But the 7.5 hasore room to hold CO2 so the upgrade is more powerful when done to the 7.5. It really is an awesome setup.
Great video content My friend+ I think the setup/ furniture you had taken off looked badass! Can you please tell me the info on the optics and light? Does the light have a laser top? Anyhow, great job bro.... 😎👍
Can I please have a link to order the upgrade on Amazon or Aliexpress?
I'd call that a win under 2 gram balls doing that much damage good show old man
Agreed💥💥💥
Hey bud, great great vid content. Always watching. Hey i got 100 4grm riotballs for my fully moded tr50 and they fall right through the cylinders chambers. Are the tuning cylinders what i need are the wholes on them smaller or? Thanks for any advice? 🤘😎👍💥
Thanks for watching! So what you need to do is size your projectile to your barrel. It could be .50, .510, .49. See what I'm getting at? I'm not quite sure what the stock bore size is. In my tuning barrel, I use 1/2 inch (.50 cal). Hope this helps💥💥💥
Nice power 💥. Congratulations. Now you have a hand-cannon💥👍. Take care and happy shooting my friend 👍😃. Btw , no need to change the pin. You will only get max 1 joule more power with a shorter pin 😉
Good to know! Thanks for the tip💥💥💥
@@thellc24-7 Iam glad to help. Take care and have a great weekend 😃
Great video , can u tell me the laser under the gun which brand it is and where u bought it ? Thanx
Watch this video here. czcams.com/video/y52HBVGvXRc/video.html
💥💥💥
Have a 22 joules custom job........Bang Bang.....
Hey man did you have trouble with the trigger after this install? My trigger is extremely stiff now..
Yes. Mine did get a bit stiff after installing the barrel 💥💥💥
Thanks! It needed a little work..
Nicely done....Go check out the huben gk1 pistol .25 cal.. it's a beast 💪I do want to get the one you're showing but it's just not even close... I spent a pretty penny for it but it's worth it 👌
I have one. I've posted about 8 videos on it already💥💥💥
Nice.. I am now a subscriber ... knowledge is power 🔋
👍🏻💯👍🏻
You need a real chroni to test with, never seen one like that anyway.
It’s reading 400 or above when you get 00.
Yup. It sure is💥💥💥
What screw driver can I use for the TR50? I have 3 screws around the top barrel that won’t budge. I’m trying to take out the valve block and put in a new barrel
I used the mini screw driver kit. It has like 5 or 6 on it. Red case clear top. I think they are made for repairing eyeglasses. Use the Phillips head💥💥💥
thank you @@thellc24-7
@@alex43rd 💯💥💥💥
you should try rubber ball ammo and steel balls with that mod. they will hurt. mine is an 11j gun I would like to do the 16j mod. what mod was yours?
I believe this has the drilled restrictor, valve block removed, tuning barrel. Right now, it is totally unrestricted and fueled by hpa💥💥💥
If you put the Chronograph in the same place with a barrel extension you will have no measurements it is just logical serious it takes into account the departure out of canon. It's as if you put it behind you when it is normal put it towards the end with you have extension barrel you will have you are measures xD 😮😅
Ok. Ill give it a try. Thanks💥💥💥
Hi.
Can u tell me the tuning barrel specification and how price is it?
You can find it and the specs on Riotballs dot com💥💥💥
Good mod. Not the complete factory mod, but then, looks like it isn't required. Solo the valves is enough. I dont think you need the extra barrel. It definitely did had more inertia power as it not only dented the pan but also seemed to have a larger push dent around the strike position. Predator metal pellet is boing to do some real damage up close. Fatal to head shots. But with the light ball you were using...it is going to take a real determined dude to try and get through 3 rounds never less the full six. Bruise like fuk!
that is 100% self defense gun now :))
Yes it is💥💥💥
The pan might be penetrated with better ammo and if it was secured and not dangle as the energy displaces when it swings around
Yes. I realized this, and changes have been made since. Thanks💥💥💥
@@thellc24-7nice video though, I pulled mine apart a couple weeks ago before getting the power kit together so now I’m looking to make sure I put everything back correctly. I also suggest the Mercury rise torpedo 50, and the umarex 68 cal 16 joule. Both hit hard out the box and you can play with all kinds of ammo!
@jasonmaruszak812 I have the Mercury Rise TR50 as well as the HDR68. My 68 is well past 16 joules. I do need another hdr68 though 💥💥💥
@@thellc24-7nice- did you tune up hdr68 from the stock or 16J? Mind sharing how? I have both and would love to make them cannons. I also like the decimator rounds, steel balls, and ammo from cordodo
@jasonmaruszak812 started from the basic model. My vids should be all on here. Just scroll back💥💥💥
Skip the short pin or at very least do it absolutely last. The shorter pin has proven nothing in terms of gains so far.
Still amazes me how consistent unmodifed markers perform.
Can wait to see your results.
Doh! I should finish the video before commenting 😂
Good test. Its another thing i havent tested with is a co2 restrictor. Not bad at all.
Hahaha. Thanks! It took me long enough to do this mod💥💥💥
@@thellc24-7 not speed but precision 😉
Ahhh. I see💥💥💥
Yea they did their homework making these
What ammo are you using for the first test?
Some cheap 1.5 gram riot balls from amazon💥💥💥
Can you convert one of these beasts into a PCP version that would obviously be hand pump friendly?
I think there is an adapter that requires you to drill a hole in the back for an adapter. It's for the HDP50 I believe.
Also, I have this video: czcams.com/video/3ZieFp_1-MQ/video.html
Thanks💥💥💥
He skipped the unscrew part for a reason, THE SCREWS DO NOT COME OFF!
What screws are you talking about?
It appears you have a "RED" button chrono which only goes up to an fps of 399. So, the reason you may not be getting a velocity reading post mod, is potentially due to the fps exceeding 400 fps. The "Yellow" button version (almost) reads velocities to 700 fps.
Yes, that is correct. They are impossible to find. Perhaps you know of a place?💥💥💥
My chronograph goes up to 9999 fps!😳
399 fps would hurt with pepper 🌶️ balls.
I would like to see you Test it in a whole chicken with different ammo
Chicken has nothing to do with reality, it's just for effects. Use some pork meat or ham with skin on it.
U had to heat it up
XD 😂 It is logical that you have not had measures you have lengthened the banana barrel so your Chrony must you put it further thought 🤔
Would u mind dropping me links to were u got ur upgrade parts ive been considering getting one of these
I got them from Riotballs dot com.💥💥💥
@@thellc24-7 thanks ill give it a look
Love your channel! Great stuff.
Don't you need to put the chrono head in front of the barrel tip? What am I missing?
This is how you use the hand-held X-RADAR 💥💥💥
@@thellc24-7 ! Right! Makes sense. Batman!
Are there any details videos in English to do upgrades on this? I sent mine out for a total of 164 to get it to 20 joules. Not trying to do that again andter 3 months of waiting lol
They are few and far between. I had to struggle to find a good one myself💥💥💥
Look at masakra or maddog.
I am looking at something for home defense. Where I live obtaining guns and licences is not easy. I was looking at this or a crossbow. Would welcome opiions. Thanks!
If those are your only options, do not pick the crossbow. You want to be able to send multiple shots in a short period of time. It takes a long time to reload a crossbow unless you find one that has a mag and can auto-index the projectiles 💥💥💥
@thellc24-7 or get both, have the crossbow ready as back up 😉
So the hdr50 and the tr50 take the same upgrades?
It's the same marker. Umarex just changed it from HDR50 to TR50💥💥💥
I had to drill my out, it was not that hard to do.
How much does it cost,an where to order it
Google has your answer💥💥💥
Where can I buy it, how much does it cost
USMCS dot com. Use code LLC24-7 for 10% off💥💥💥
Where do you hold the chrono??
Left side of the marker, against yhe barrel, a couple of inches back💥💥💥
@@thellc24-7 You should try it again with the chrono holding on at the end of the actual barrel. As the projectile keeps accellerating along the barrel...
when it read nothing its over 400fps use heavier balls to get a reading
I wanted pieces only one .
I don't understand 💥💥💥
Kool story bro. I’ll stick with my 9mm.
Ok💥💥💥
I have one tr50 modified.
308fps with Devastator 4.8gram.
How many joules do you think ?
Install the pin today..
Open cylinder, drilled 1.5mm, that brick in the handle..barrel extender.
1. shot 326 psi
2. 364
3. 316
4. 302
5. 254
6. 180
Devastator bullets.
Looks like 21 joules💥💥💥
@@thellc24-7
364psi = 29 joul with Devastator.
Calculator on the internet.
@@thellc24-7
I own 6 HDR50..All modifed different.
Have many other bullets but the devastator is the best.
@@trevligodmjuk2721 it was in response to your 308fps question
Not convincing, no Joule data, no comparison of the steel plate with 7 Joule
Go back and watch the stock video, then💥💥💥
Inferior testing equipment. Not doing what kit suggests and not having ability to work on it without destroying parts . Total fail in my opinion
Like you said, your opinion. Thanks💥💥💥
Throwing rocks for homeprotection is more viable than this
Well that's your opinion. Thanks for watching 💥💥💥
@thellc24-7 So dumb
You clearly have no idea what you are talking about. My unmodified HDR50 with Devestator Rounds knocks a hole in a tree deep enough to put my pinkie finger up to the first joint in. If you get shot at Close range by an Hdr50, it will mess you up.
👍😉
💥💥💥