Kwikset Powerbolt® 240 Electronic Door Lock Installation Video
Vložit
- čas přidán 12. 05. 2024
- Kwikset Powerbolt® 240 5-Button Keypad Electronic Door Lock, available in both traditional and contemporary designs, is an easy and attainable way to upgrade to an electronic door lock. It offers convenient keyless entry that makes coming and going secure and simple. Customize up to 12 user codes and enjoy easy code access with the 5-button light-up keypad. Additional features include Auto Lock and Vacation Mode, which provide security and peace of mind. All you need is a screwdriver to install it.
- Jak na to + styl
Instructions were easy, even for me. Thanks so much
It would have been a lot better if this video included an unboxing and pointing out of the different parts and a close-up of each package of screws
This instruction video was concise and entertaining. Thanks!
I'm trying to install this device on a door where the interior handle is on the right side of the door. Do you have any information on how to swap the direction of the locking turn?
Hi and here to help! The Powerbolt 240 is designed to fit both left-hand and right-hand doors. To hand your lock, install it as advised in this video and perform the Door Rehanding in Step 15 here: kwik.st/3sYcsrG Thanks ~ Kwikset Social
Super easy instructions, thank you. Am putting this on a door to a small apartment within a house for short term renting. Wouldn't it be super easy for a renter to just look up this video and change the code himself?
Hi and here to help! Please know that you can always factory reset the lock, which will delete all codes and you can reprogram the lock with new codes at any time. Here's a link to the installation & programming guide: kwik.st/477VDcw Thanks ~ Kwikset Social
where does the collar go
Hi Francis - Here to help! Please see Section 3A of the installation guide for the Adaptor Ring installation details: kwik.st/3Fw3swt Thanks ~ Kwikset Social
I just installed this lock and it works fine if the key is inserted but if I take the key out it won't work. The key only comes out in the locked position
I figured it out after leaving the comment. I had to remove the exterior faceplate and rotate the spindle 360° and then reassemble the lock
Having the same issue.... will try @@gordonjones9343
Hi! Please reinstall the lock with the key removed from the cylinder and ensure that the flat blade is in the vertical position. Please see Section 4-B here:
kwiksetprodstorage.blob.core.windows.net/documents/kw_ig_5054450[240]eng-spa.pdf Thanks ~ Kwikset Social