This is literally a work of art. Your projects spare no expenses or cut any corners. I get inspired to sort out even the smallest details of my build as a result of following your vehicles.
Mind blowing! The design that has gone into that stand-off platform for the intercooler core is wonderful. When I watched it kinda 'click' into place on those rubber standoffs....I think anyone watching knows viscerally what that feels like and it looks so satisfying! Just impeccable.
hell fucking yeah dude, so freakin' stoked on this build!!! i just got a 2 post in my garage and i'm itchin for a project car, i could only DREAM of doing something this wicked!!!!!! every inch of this car is an engineering and fabrication wet dream
An equal length 5 to 1 exhaust in such a tight space? I don't want to be that guy trying to fab that. Good luck to him but i'm sure it's already come together and will sound perfect. Can't wait to here this thing rev. Edit: If anyone is wondering, splitting the exhaust post collector, won't effect your sound. The pulses are already collected well before hand. My NA 20b has dual exhaust tips that equally split post muffler. If you'd never seen my back side, you could never tell it had duals.
Incredible Dave. I love your vision and dedication to making the car that you have dreamed of. You attention to the art is so important, and I now see why you took your time in posting videos. I feel it is critical that this car be exactly what you see it as in your mind and I am genuinely grateful you are sharing your philosophy with us. I pay close attention to the details you explain and hope to take the same build philosophy on my present project. Which similar to yours, is more a piece of mechanical art meant to be powerful but built primarily for the experience of operating it.
David, I followed you with the four rotary series and that was incredible. But this is stellar. I must say I appreciate you sharing your experiences and for your humble personality. Looking forward to following this remarkable project. Gas Pump Rob in California
You're very professional David 😎👌 I can't wait till this is complete just so we can see the look on your face and your response to driving it for the first time
This Just On Some Other Level And Pure Perfection. I Still Watch The Old Videos Of That Beauty Of Art Work RX-7. IDK It's Rob Dahm Or David Build. They Put A lot Of Detail And A lot Of Blood, Sweat And Tears. This Beauty Going To Be A Monster.
Man every time I see these videos I'm like DUDE JUST FINISH IT ALREADY I CAN'T WAIT TO SEE IT. I wanna hear this monster so bad... Please if you ever do a tour with it bring it to Colorado... I'll drive 300 miles to see that thing no problem lol.
Hi mate, just letting you know for some reason I don't get notified when your videos come out and I have all the bells ticked. Love the mind blowing machine your creating, it's an absolute work of art.
Thank God for you Mr. Mazzei! We are all excited to see the final product and are thoroughly enjoying the build process! The world's first 5 rotor build!😃
Lol this isn't the first 5 rota the e saft was built by ppre ( the guys that made the first 6 rota ) and thay had to build a motor to be able to build him his e saft so ppre once again hold the touch as far as the first
10 months ago thay had there ready build this guy just has a empty block waiting for ppre to send them the e saft😂 start at 5.30 to see the 5 rota and first customer 6 rota witch has had 10 years r&d czcams.com/video/g_SQYmG56Ic/video.htmlsi=q_0N21jxtpYXhLwb
I can't wait to win this car during your car giveaway! I'm super excited to rip this around Harris Hill Raceway. Five-rotor turbo with little to no piping. This car is going to f'king rev faster literally than a blink of an eye. BTW - No Y pipe needed with the exhaust. Use Titanium and straight pipe that shit right out the back with a slight angle so all the fire gods can be expelled. LOVE this build!
12/10 stoked on this. Probably going to need some gold reflective tape and / or additional heat protection between the turbine housing and the bodywork. I’m sure you already have plans and will have it sorted.
Ceramic coating on the exterior of the intake runners to reduce the rate of heat seeping in, and on the interior of the exhaust runners to reduce the rate of heat absorption by the runners. Then a turbo blanket and maybe some exhaust wrap, if they don't heat soak the metal too much.
A centered 5'' exhaust would be easy with waste gate dumps out the top It literally looks like the batmobile from the back with the Jet fan Garret Turbo can't wait for the next upload and to see this thing rip! The Packaging on the 5 rotor and water to air cooler are amazing!! Great Engineering!
This is literally a work of art. Your projects spare no expenses or cut any corners. I get inspired to sort out even the smallest details of my build as a result of following your vehicles.
An absolutely beautiful build...
It's like gearhead porn lol.
Mind blowing! The design that has gone into that stand-off platform for the intercooler core is wonderful. When I watched it kinda 'click' into place on those rubber standoffs....I think anyone watching knows viscerally what that feels like and it looks so satisfying! Just impeccable.
Absolutely insane build, can't wait to hear it run!
hell fucking yeah dude, so freakin' stoked on this build!!! i just got a 2 post in my garage and i'm itchin for a project car, i could only DREAM of doing something this wicked!!!!!! every inch of this car is an engineering and fabrication wet dream
A day with an update from David is a good day.
An equal length 5 to 1 exhaust in such a tight space? I don't want to be that guy trying to fab that. Good luck to him but i'm sure it's already come together and will sound perfect. Can't wait to here this thing rev.
Edit: If anyone is wondering, splitting the exhaust post collector, won't effect your sound. The pulses are already collected well before hand. My NA 20b has dual exhaust tips that equally split post muffler. If you'd never seen my back side, you could never tell it had duals.
Appreciate the time you take to talk us through it, thanking you. 🙂
That engine / turbo / intake setup just looks so elegant! It's art and function.
Congratulations on even getting to this stage. Remarkable.
Thank you very much!
Can't wait to see this beast come alive!
Man MF5 just rocked the whole car world again! Can't wait to see what this car will do on track and the evolution over time-Brilliant work Sir!!!
Exhaust shape of 5 rotaries will be dope. Because it is a 5 rotor engine ❤ awesome build. Cannot wait for the actual performance figures.
this car will be remembembered forever as one of the all time greats during the combustion car era.
Your SLC is going to be absolute perfect... The guys at Waterford Hills would be blown away to see this on the track when it's done
I forgot about this car not sure why never popped up in my feed notifications are on
Damn, rob dahm builds a 4 rotor, and suddenly you're after a 5! 😂
Keep up the great work! So glad to see you back on YT and sharing your Journey with us!
The absolute best build I’ve seen!! The more video updates the better
Absolutely glorious!! This is beautiful, functional, and meticulous work!
This build is unreal. Absolutely amazing work❤
Incredible Dave. I love your vision and dedication to making the car that you have dreamed of. You attention to the art is so important, and I now see why you took your time in posting videos. I feel it is critical that this car be exactly what you see it as in your mind and I am genuinely grateful you are sharing your philosophy with us. I pay close attention to the details you explain and hope to take the same build philosophy on my present project. Which similar to yours, is more a piece of mechanical art meant to be powerful but built primarily for the experience of operating it.
It was amazing to see the rear clam on for the first time, this is going to be so epic!
David this car is so next level, im loving this build and the fact its single turbo 5 rotor :) cant wait to hear it
Thanks for geeking out on your design. It brings the appreciation up 500%.
looks freaking awesome can't wait for the finished project!
David, I followed you with the four rotary series and that was incredible. But this is stellar. I must say I appreciate you sharing your experiences and for your humble personality. Looking forward to following this remarkable project. Gas Pump Rob in California
What a beautiful, well thought out build. It’s going to be amazing!
It already looks like a monster of a car cant wait to see it running
Amazing work by all. Hell of thing David!!
Your ability to transform a dream into reality with such attention to detail is truly inspirational. I can't wait to hear this thing scream!
Fantastic project. TOTAL WORK OF ART !!! Cheers from France.
Extremely Extremely Impressive build, can't wait to see the finished results.
My god the level of fabrication skill is amazing! I can't wait to see this thing completed.
You're very professional David 😎👌
I can't wait till this is complete just so we can see the look on your face and your response to driving it for the first time
Protect this man at all cost
Awesome build. Can't wait to see more on the 5 rotor.
That turbo is massive 😮
Building works of art meant to be driven. I love it. The Rx7 was so sick, and I can't wait to see this one finished!
I love following this build!
Been waiting patiently to to see your next chapter... Can't wait to hear this thing!
Very cool project. I'm looking forward to seeing it all come together. Thanks for sharing the progress.
Absolutely astounding ! I would love to learn more about the suspension if possible in a future video. Thank you for sharing 👍🏽
David, you sir are an absolute madman! I love it.
that cooling system is actually insane. cool to see
Incredible build
These regular updates are awsome mate. Keep up the great work.
I cannot wait for first drives. This is the most thoughtful, groundbreaking automotive project I know.
Beautiful work all round🥰 can't wait to see this running!
Jeez... this is gonna be serious. Be careful drivin this one, man. Stunning work all around. Just gorgeous.
Very impressive Dave!!
This is going to blow everyone's mind! Thanks for the explanation, supercool
That thing is gonna be so dang fun!!! While also sounding as insane as any engine we get to hear!
Holy shit. That turbo is the size of a freaking basketball.
we wait until the process is complete ❤
Thanks for sharing the progress!!! Amazing build again.
I love this! This has been my dream car for the past 10 years! I'm happy you made it reality!
excellent work! I love your content
This is such an amazing build. I can't wait to see you takikg it for a rip. I hope I get to see you driving around Birmingham 🙂
Awesome build 👍🏻👍🏻👍🏻
A thing of beauty. Form following function. The sound will be amazing. The SLC is a very capable race chassis. This will be the ultimate RCR car.
Thank you, the 5 Rotor i am interested for years, especially the sound :D
that turbo is gonna get so much air 😍cannot wait to hear it fire up 😄
this is going to be super amazing
UNCONDITIONAL GRATITUDE: MY SON & I WATCH & LEARN! WE SHALL CREATE AS WELL: THANKS FOR LEADING THE WAY!
This Just On Some Other Level And Pure Perfection. I Still Watch The Old Videos Of That Beauty Of Art Work RX-7. IDK It's Rob Dahm Or David Build. They Put A lot Of Detail And A lot Of Blood, Sweat And Tears. This Beauty Going To Be A Monster.
Work of art.
Definitely following with excitement. Can't wait to hear it scream.
Sweet build brother
Man every time I see these videos I'm like DUDE JUST FINISH IT ALREADY I CAN'T WAIT TO SEE IT. I wanna hear this monster so bad... Please if you ever do a tour with it bring it to Colorado... I'll drive 300 miles to see that thing no problem lol.
Hi mate, just letting you know for some reason I don't get notified when your videos come out and I have all the bells ticked. Love the mind blowing machine your creating, it's an absolute work of art.
Just gorgeous per usual...
Pretty cool, nice fab work
Awesome TOTALLY AWESOME WORK !!!!!
Been waiting forever for this video I swear !!!
Absolute champ David ... cant wait to see it laying rubber on the road!
Thank God for you Mr. Mazzei! We are all excited to see the final product and are thoroughly enjoying the build process! The world's first 5 rotor build!😃
Lol this isn't the first 5 rota the e saft was built by ppre ( the guys that made the first 6 rota ) and thay had to build a motor to be able to build him his e saft so ppre once again hold the touch as far as the first
10 months ago thay had there ready build this guy just has a empty block waiting for ppre to send them the e saft😂 start at 5.30 to see the 5 rota and first customer 6 rota witch has had 10 years r&d czcams.com/video/g_SQYmG56Ic/video.htmlsi=q_0N21jxtpYXhLwb
Wow I cannot wait to hear that fire up 🔥
With that short intake and exhaut piping, it’ll have a damn near NA throttle response, nearly telepathic 😍😍😍
Looking good keep up the good work 👏
Most Impressive Sir!
Can't wait to hear this beast.
Keep up the great work!👍
This inspires me to do the same. I want to build cars. This is an engineering masterpiece. We are still here waiting. Masterpieces take time.
Great idea with the clamps
It’s a beautiful machine ❤
Excellent works😊
That turbo is so big lol. This thing is going to be insane
What an original build, I would love to be able to build something custom at this level. Good luck!
I can't wait to win this car during your car giveaway! I'm super excited to rip this around Harris Hill Raceway. Five-rotor turbo with little to no piping. This car is going to f'king rev faster literally than a blink of an eye. BTW - No Y pipe needed with the exhaust. Use Titanium and straight pipe that shit right out the back with a slight angle so all the fire gods can be expelled. LOVE this build!
this guy is a genius... an automotive artistic genius. jesus christ.
12/10 stoked on this. Probably going to need some gold reflective tape and / or additional heat protection between the turbine housing and the bodywork. I’m sure you already have plans and will have it sorted.
Definitely!!!!!! Most likely will do all of the above and a turbo blanket
Ceramic coating on the exterior of the intake runners to reduce the rate of heat seeping in, and on the interior of the exhaust runners to reduce the rate of heat absorption by the runners. Then a turbo blanket and maybe some exhaust wrap, if they don't heat soak the metal too much.
I cannot wait to hear this machine.
This thing is glorious!
Amazing build 😊
This is a personal dream come true. Its going to sound like a beautiful f1 v10 🤞🏾🤞🏾
Isn't that just bliss..❤
That looks dope!!!
A centered 5'' exhaust would be easy with waste gate dumps out the top It literally looks like the batmobile from the back with the Jet fan Garret Turbo can't wait for the next upload and to see this thing rip! The Packaging on the 5 rotor and water to air cooler are amazing!! Great Engineering!
Nice bro.. guns looking good too 💪😉
Absolut wild build!
This thing gonna be a monster crazy af