Does the template come with the hubs so that I can redrill my rotors? Thinking about buying the hubs but need to know if they come with templates for the rotors, thanks
very informative, thanks for sharing your work. not sure if it was what you were going for but the boost in background music when cutting scenes or fixing mistakes is pretty repetitive and becomes noticeable, not bashing ya or nothing, just a thougth
More to explain: You can not redrill your Hub because this can move all hub with center hole out of center. But you can redrill rotor because hub stays fabric and center hole too. When you get rotor on hub then rotor stays centered on hub center hole, and rims too.. S'o, the bottom problem is your center hole of the rim and your hub must be the same (if not, make adapter only for center hole) if not your rim will not stay in center of rotation - bolts will bend, bolts will brake, and you'll see your wheel pass you in the drive...
The wait on the parts are terrible customer service the worst no way to contact them about parts purchased but they seem to get parts out quickly to big CZcamsrs like adam lz big boost i seen a few other CZcamsrs rocking nerp products but there bigger people terrible way to do business
The problem with your kit is that it prevents me from using 5x120 wheels in the future. Make your conversion hubs female only. If i want to put studs on it i will.
that shit was gangster .
fckn hubs are expensive , but your right . proper machine service .
super easy to do and allows me to use all my jdm wheels
Awesome as usual !!
Nice vid.. Question
What type of drill bit are you using Black Oxide, HSS, Titanium, Cobalt? Thanks
Does the template come with the hubs so that I can redrill my rotors? Thinking about buying the hubs but need to know if they come with templates for the rotors, thanks
Do you guys do those templates from 4x100 to 5x114?
Is there any other way to adapt the bolt pattern? Like and adapter you can just buy? For e90
Is there any rotors that will fit that are 5x114 instead of drilling them
Nice video man! Where can i get those machined hubs for my e36??
just quick question. i want to change the bolt pattern from 5 x 114.3mm to 5 x 127mm. you have a template kit for that bolt pattern setup?
Will E38 rotors fit 5x 114.3
Awesome idea for diy. How would you tackle if you needed to drill hubs also to change pcd? Full round flanged hub
I may be doing this service soon
I have a 2009 335i e90 was wondering if you know where I can get these templates for my vehicle? I wanna convert my 5x120 to 5x114.3 as well!
very informative, thanks for sharing your work. not sure if it was what you were going for but the boost in background music when cutting scenes or fixing mistakes is pretty repetitive and becomes noticeable, not bashing ya or nothing, just a thougth
How much you charging for a toyota prius 2017 5x100... I am doing my conversion to 5x114.3 soon
What hub is that ? I need that for my Supra
More to explain: You can not redrill your Hub because this can move all hub with center hole out of center. But you can redrill rotor because hub stays fabric and center hole too. When you get rotor on hub then rotor stays centered on hub center hole, and rims too.. S'o, the bottom problem is your center hole of the rim and your hub must be the same (if not, make adapter only for center hole) if not your rim will not stay in center of rotation - bolts will bend, bolts will brake, and you'll see your wheel pass you in the drive...
...Bolts are only using force to make your rim stay on center hole of the hub and rotate without any shake and out centered.. (sry for bad eng)
Do you have a template' for 5x120 to 5x114.3
Im looking for same job but 5x100 to 5x112 lmk if that is possible please
Where can I buy the template?
How much is the Templet
Do you have a 4x100 to 5x114.3 for the E30?
yeah that would be great . or 4x100 to 5x120
Where can I find the templates, cant find them on the site?
The template is to convert the rotor only, the hubs need to be precise and machined.
The hubs are available on the Nerp Tech website.
The wait on the parts are terrible customer service the worst no way to contact them about parts purchased but they seem to get parts out quickly to big CZcamsrs like adam lz big boost i seen a few other CZcamsrs rocking nerp products but there bigger people terrible way to do business
Those holes are wayyyyy too close to the oem holes. Thats going to break.....
Do you have a contact number for your website ? I can't find these templates on your website. How can I purchase these templates ?
I feel like this could have been a 5min video
The problem with your kit is that it prevents me from using 5x120 wheels in the future.
Make your conversion hubs female only. If i want to put studs on it i will.
how does it prevent 5x120 wheels ? can’t you just turn the wheel/rotor to fit in the 5x120 holes?