This just happened to me on my 2013 Hyundai Elantra. My battery went dead yesterday and I didn't know why and it was daylight. It got night time and I seen my break lights were not shutting off. THIS VIDEO DEFINITELY HELPED A LOT. Definitely saved it in my list. UPDATE....I JUST CHECKED AND IT WAS THE BREAK SWITCH STOPPER, I FOUND THE PIECES ON THE FLOOR.....EXACTLY WHAT YOU SAID IT WAS. THANK SOOOOO MUCH
Brake lights were staying on and draining my battery, watched this video, grabbed a flashlight and found the grommet broken on the floor under the brake pedal. I'm not a car person but I'm going to try and order the new part and install it myself. Thanks for all the help and explaining it so perfectly.
I had this problem twice, first time in 2018 dealer did it under recall; Second time happened this week instead of using another grommet that will dry out and disintegrate, I placed a magnet same size as the grommet on top of the pedal arm under the switch. That's pretty much a permanent fix, won't dry out or wear out; that little grommet can affect cruise control, Dole light, loss of speed as you drive , turns off your anti skid, etc.
I have a 2013 Hyundi Accent, and just had the brake lights come on like this. I NEVER seen this before, so thanks for this video; i was able to find the 15 volt stop fuse, to prevent battery from dying! Thank you! i'll be calling to my mechanic tomorrow to see if they have the brake switch to get it changed out, hopefully. Of course, this happens the day before i was going to Daytona for the race. THANKS again! Your tutorial was the BEST i saw on the subject!!
Very late on this I know you’re specific issue is probably solved, but a lot of the time with these kind of old Hyundais, that grommet he’s talking about simple falls off and won’t hold the switch down. Look on the floor of your car in the drivers seat and it’s probably somewhere, just a tiny black rubber doughnut looking thing. It’s easy to put it back
After changing fuses, bulbs and the brake light switch, I finally landed on this video and found the problem was the grommet had completely came off. Thanks for the tip, wish I had watched this sooner! 😆
2013 Elantra, My back left break taillight is stuck on, blew the bulb once. Replaced and blew again. Was this your issue? I want to order new tail lights but don’t want this to fuck up the new ones
Thanks so much. After watching your video it took me seconds to replace my brake stopper on my Hyundai Elantra vs me trying for an hour & still came up short.
I just seen my car break lights on, its too late to visit a garage, i started my journey to garage but realised i forgot my wallet 😅 on way back just checked this video after typing my problem to Google. Really Thanks for sharing such information 😀 😊
It was very helpful to learn of the additional fuses under the hood… nowhere did I find this simple information. Fixed my brakes in one minute, thank you!
A++ Short. To the point. Good focus and lighting. Hyundai has a RECALL on the rubber bumper (p/n 32876-4B000 $2.08 ) under the "stoplamp switch." The black stopper falls apart. The new stopper is clear/yellow. A++
You a goat bro! Thank you for this video. Like others I looked around my dirty floor mat and found the grommet in pieces. Glad I haven’t vacuumed it yet 😂
Your video is well informative and easy to follow. Because your video, I found my break light issue.( the grommet was broken in half)I'm a new subscriber from today . Thank you so much. You save me big time.
The rear lights on my wife's Elantra wouldn't go off. I would never have known about the grommet without your video. I found that it had popped off and was on the floormat. I put it back in place and fixed the issue. Thanks again!
I’m a 68 year old lady dealing with mechanics where I may as well Vaseline myself for extra protection. I own a 2016 Hyundai Elantra still under 10 year warranty,i know my car needs engine/transmission mounts, has been recalled for ANTI THEFT UPDATE and was due for maintenance BEING at 33,000 miles. I took it to a mechanic to get an PRE-estimate before I took it to the dealer. This particular mechanic gave me an outrageous estimate OF 3k stating I needed brakes, rotors, belts & mounts. It was a different story when I took it up the dealer. After waiting 8 1/2 hours at the dealer the only thing they did was the “anti theft update” and came back with a different story. Yes I do need mounts ( I already know that) They said I need spark plugs every 5k, tire rotation and that’s it, I asked them about the brakes they said they were fine, Next day less than 24 hours later I noticed my brake lights stayed on once I turned car off. I unplugged the lights in order to do some reading/ searching and not kill my battery . Videos Point to the brake switch and one video said if you see broken plastic pieces on floor under brake foot likely it’s a broken connector piece. Then I found your video. BEST VIDEO ON THE ISSUE IM HAVING. Your vid pointed exactly to the piece that I found on my floor mat. Here’s my question. Since I have an appointment at the car dealer in a couples days 5/29/24 how do I convince them it’s not a huge issue and just the small broken piece? Additionally since the Anti theft update my abs warning light pops up when I go to park but turns off once I restart the car. I’ve heard horror stories about this update how it screws your car. Any how now you know my whole life history when really what I wanted to do was THANK YOU VERY MUCH FIR THR EXPERT VIDEO AND ADVICE. I Widh you lived in Miami🌞
I just noticed by someone who helped me check out the lights,the brake light inside the car on the back side of back windshield come on,but the ones at out side on lamps don't,I'd have power going to the tail end lamps but not brake lights.
Very good video, great explanation. Can you tell me where the headlight fuse is located? I have looked in the owners manual and it is not obvious. Thank you!
Thank you for the video. What are the signs of a bad brakelight switch. Previously my brakelight stayed on. I replaced the rubber stopper. Brakelight turns off but battery still drains.
Hy thanks for your great info. I'm having a difficulty with hyundai santafe 19 front light are permanently on and can't turn them of I've checked all the fuss they are all ok. Anyway salutations please?
My 3rd brake light is not going on even after replacing the bulb. Is there any seperate fuses that could be the problem with just that light? All the other brake lights are fine.
Hi!! Thank you so much for your video. Silly questions, my brake lights are working fine it’s the taillight that’s out. Is the 15 and 10 amp fuse the same for the tail lights on the Hyundai Elantra? Thank you!!
Yeah the brake lights were staying on and I found lil pieces of the grommet on the floor directly under the brake pedal,,I ordered a new one off Amazon, They call it a "Pedal Stopper" 10 bucks free shipping how can you go wrong and it's a Hyundai Genuine Part for the 2012 Elantra which is probably the same on the 2013,, Great post and it saved me I'm guessing at least $100,, most electrical problems on cars they seem to charge though the ying yang for,,,lol,,thanks for a great post
I also took a wooden paint stirring stick and made a disk the same diameter and temporarily glued it on the metal plate until the part comes,, The paint stirring stick is pretty close in thickness to the grommet,, and it's working fine for now lol
Aren't you going to do the whole history of brake lights what about a biography of yourself? This should only take about 10 minutes. I'm kidding this is a great video you earned a subscriber
For cars that have a push button start, can the brake sensor switch be the cause of a "delay" in the starting process? Sometimes i get in, put my foot on the brake, press the start button, and it could take 30 seconds or multiple tries before it starts up. For clarity, i have a 2015 Hyundai Azera.
Hi I’m trying to check my brake lights I’ve done all the fuses and they are good but I’m trying to do the bottle part but I can’t remove the safety clip
Question please - My car has a code for brake lamp relay. But my lights are working except the front right turn signal and the bulb is definitely good. Could this affect the front and not the back and come back with that code? Also where does the brake lamp relay go? I have a hard time even finding the part available
Any tips on getting the white clip back in. I’m in Aus and I’m assuming being back to front that is why yours was so easy to get in and out. Took me a hot minute to get but I did it, just can’t get it back in now😢
Thanks. Mine all 3 brake lights doesn't turn on. But I can turn on and off the rear light. Hyundai Reina 2019 Manual. So this will help me isolate it. I may need to check the brake light switch first and see if it may just be stuck. since all 3 light doesn't lit up when I step on the brake. ^_^ Thanks for this.
@@ravierkonan1694 Yes. I remove the brake light switch. I found out that it was stuck. Sprayed it with WD40 and it's working now. Possible dirt made a friction. it's clean and all back to normal.
Only one of my break lights are stuck on.. right passenger that is, driver side break light works fine, cant find information anywhere, any tips or answers?
I have 2014 Elantra and all my bulbs work but only one of them will turn on when mashing the brake? No matter what side I put that bulb on? Does that mean my other bulbs could be bad? I just don't get it if they were bad why would they turn on first of all?
I have a 2013 elantra gls and my switch connector plug is smaller on my car and not like the one shown in this video. I was given the one in your video as a replacement and the connection on the switch is not compatible. I have a different switch with a smaller plug attachment. Are there different switch types for these models?
can you pls share your thoughts on the manual transmission clutch pedal?. The problem is I can not shift the transmissionthou the fluid is ok. Is ther an electrical switch that controls the shifting even I pressed the pedal? would appreciate your reply on this. Thanks for the earlier info, it helps a lot. and informative too.
Thank you so much! Given me a few troubleshooting steps to check before a costly diagnosis for my wonky break light. My bulb is fine but depending on if lights are on/mid/off one light doesn’t function correctly. I subbed because of this!
I lost brake lights. Changed the switcher with a new part from auto zone and brake lights still not on. Took it to mechanic and said it was the switcher. Why didn't it work for me when i plugged in the new part? The plunger was completely out so the lights should have come on, correct. Went from a $25 part to a $300 repair 😢
So I’m having some weird issues with my driver side brake lights… when the car is driving/idling, the brake light is on. But when I brake the light turns off. This is a new issue, it wasn’t always like this. Also when I hit my brakes my left rear turn signal doesn’t work either. But when I am not pressing my brakes my turn signal works. Also, I just looked under the hood and my car does not even have that first blue fuze you show in the video. I am new to cars and would love some help if anyone has any input!
Hi, thanks for the video. Quick question- I upgraded my Hyundai Elantra 2018 SE base radio to a touchscreen 7" display radio. In this process I connected ignition wire to the battery for the radio and now it's draining my battery. I was wondering if I can tap it into a fuse which turn on only when the car is ON. Can you tell which fuse location I should go for? Thanks for your response.
Okay so, what if it's just one tail light .. just one stays on (my driverside) only has been a few days this happening and now my higher mount tail light isn't coming on .. my bulbs are good, otherwise they would illuminate but i was told maybe my brake switch or circuit problem but wouldn't this affect BOTH lights, not jus one ??
I have changed out the bulb for the drivers side break light, but the breaklight still will not work on that side. The center & passenger side work fine. How do I fix that?
I have a 14' Hyundai Elantra the passenger turn signal doesn't come on, when the lights are turned fully on the dashboard lights up the turn signal light. How do I remove the 60A fuse to test it from the multi fuse link?
Videos like this are the BACKBONE of CZcams. What an amazingly succinct & easy to understand explanation!
For the common person who uses CZcams:
succinct: (adjective) Characterized by clear, precise expression in few words; concise and terse.
This just happened to me on my 2013 Hyundai Elantra. My battery went dead yesterday and I didn't know why and it was daylight. It got night time and I seen my break lights were not shutting off. THIS VIDEO DEFINITELY HELPED A LOT. Definitely saved it in my list. UPDATE....I JUST CHECKED AND IT WAS THE BREAK SWITCH STOPPER, I FOUND THE PIECES ON THE FLOOR.....EXACTLY WHAT YOU SAID IT WAS. THANK SOOOOO MUCH
Same thing here can you help me I found the pieces on the floor what do I do??
There is a recall on this now. Call a dealership and they’ll fix it for free
Not all heroes wear capes. Thank you sir
One of the best "how to" videos I've seen. Well done.
Brake lights were staying on and draining my battery, watched this video, grabbed a flashlight and found the grommet broken on the floor under the brake pedal. I'm not a car person but I'm going to try and order the new part and install it myself. Thanks for all the help and explaining it so perfectly.
I had this problem twice, first time in 2018 dealer did it under recall; Second time happened this week instead of using another grommet that will dry out and disintegrate, I placed a magnet same size as the grommet on top of the pedal arm under the switch.
That's pretty much a permanent fix, won't dry out or wear out; that little grommet can affect cruise control, Dole light, loss of speed as you drive , turns off your anti skid, etc.
@@pjfsr7024 where did you get the magnet from
@@pjfsr7024 thank you because these are all the problems I am having cruise not working skid turning on and off
@@naybahoodbyoung829 I had a bunch from harbor freight, but look in walmart office section or online.
Sorry I just saw your question now.
I have a 2013 Hyundi Accent, and just had the brake lights come on like this. I NEVER seen this before, so thanks for this video; i was able to find the 15 volt stop fuse, to prevent battery from dying! Thank you! i'll be calling to my mechanic tomorrow to see if they have the brake switch to get it changed out, hopefully. Of course, this happens the day before i was going to Daytona for the race. THANKS again! Your tutorial was the BEST i saw on the subject!!
Very late on this I know you’re specific issue is probably solved, but a lot of the time with these kind of old Hyundais, that grommet he’s talking about simple falls off and won’t hold the switch down. Look on the floor of your car in the drivers seat and it’s probably somewhere, just a tiny black rubber doughnut looking thing. It’s easy to put it back
One of the best car tutorials I’ve ever seen, Thank you sir.
After changing fuses, bulbs and the brake light switch, I finally landed on this video and found the problem was the grommet had completely came off. Thanks for the tip, wish I had watched this sooner! 😆
2013 Elantra, My back left break taillight is stuck on, blew the bulb once. Replaced and blew again. Was this your issue? I want to order new tail lights but don’t want this to fuck up the new ones
You explain things so well bro. Thank you
You’re doing the lords work. Thank you so much for this video👍
Thanks so much. After watching your video it took me seconds to replace my brake stopper on my Hyundai Elantra vs me trying for an hour & still came up short.
Hey this was a great video for me anyway. Was able to fix problem the grammit was missing the video here was clear as well as the audio thank u again!
I just seen my car break lights on, its too late to visit a garage, i started my journey to garage but realised i forgot my wallet 😅 on way back just checked this video after typing my problem to Google. Really Thanks for sharing such information 😀 😊
Definitely helped me today!! Saved money doing this myself!! Thank you!
It was very helpful to learn of the additional fuses under the hood… nowhere did I find this simple information. Fixed my brakes in one minute, thank you!
Extremely beautifully explained. Great Job!! Thank you sooooo much.
A++ Short. To the point. Good focus and lighting. Hyundai has a RECALL on the rubber bumper (p/n 32876-4B000 $2.08 ) under the "stoplamp switch." The black stopper falls apart. The new stopper is clear/yellow. A++
What’s up man just tryna find that little rubber piece! Where’d you find it?
THANK YOU. Found the grommet split in two as soon as I went to look at the break light switch
Thank you KING. Appreciate this big time.
thank you brother your a life saver GOD Blessed you in abundance.
Thank you, was able to fix mine without a cent thanks to you.
spending a cent.
Amazing info here on brake lights stays on I will come back to this vlog as I check out same issues with my 2011 Elantra here
You a goat bro! Thank you for this video. Like others I looked around my dirty floor mat and found the grommet in pieces. Glad I haven’t vacuumed it yet 😂
Found mine as well last night in the floor what did you do to fix it? Whole new brake switch or
Thank you!! 🙏 🙏your video & knowledge saved me 🙌🙌
Your video is well informative and easy to follow. Because your video, I found my break light issue.( the grommet was broken in half)I'm a new subscriber from today . Thank you so much. You save me big time.
Hey!!! My grommet is broken too, it's easy to replace it? Thank you
@@eliezergarcia9692 Based on both your responses, I assume the grommet can be replaced individually? Thanks.
Quality video! Thank you sir!
Great video! Im on my way to help my friend fix her car. She might think i actually know what I'm doing!
The rear lights on my wife's Elantra wouldn't go off. I would never have known about the grommet without your video. I found that it had popped off and was on the floormat. I put it back in place and fixed the issue. Thanks again!
Best video. We were able to find the issue, missing now how to fix the issue with this thing not touching the iron part.
I’m a 68 year old lady dealing with mechanics where I may as well Vaseline myself for extra protection.
I own a 2016 Hyundai Elantra still under 10 year warranty,i know my car needs engine/transmission mounts, has been recalled for ANTI THEFT UPDATE and was due for maintenance BEING at 33,000 miles.
I took it to a mechanic to get an PRE-estimate before I took it to the dealer. This particular mechanic gave me an outrageous estimate OF 3k stating I needed brakes, rotors, belts & mounts.
It was a different story when I took it up the dealer.
After waiting 8 1/2 hours at the dealer the only thing they did was the “anti theft update” and came back with a different story.
Yes I do need mounts ( I already know that)
They said I need spark plugs every 5k, tire rotation and that’s it, I asked them about the brakes they said they were fine,
Next day less than 24 hours later I noticed my brake lights stayed on once I turned car off. I unplugged the lights in order to do some reading/ searching and not kill my battery .
Videos Point to the brake switch and one video said if you see broken plastic pieces on floor under brake foot likely it’s a broken connector piece.
Then I found your video.
BEST VIDEO ON THE ISSUE IM HAVING. Your vid pointed exactly to the piece that I found on my floor mat.
Here’s my question. Since I have an appointment at the car dealer in a couples days 5/29/24 how do I convince them it’s not a huge issue and just the small broken piece?
Additionally since the Anti theft update my abs warning light pops up when I go to park but turns off once I restart the car. I’ve heard horror stories about this update how it screws your car.
Any how now you know my whole life history when really what I wanted to do was THANK YOU VERY MUCH FIR THR EXPERT VIDEO AND ADVICE. I Widh you lived in Miami🌞
Thanks! You are the man!
*This video helped out a lot , saved me $100 or even $200 😊. Thank you!!!
Well done. That's how a how to video should be done. Subscriber earnt!
Yup great video. Save me some time and work.
❤❤❤❤ this truly help me tonight
Thank you, this video is useful with an easy explanation
Absolutely helpful.
Thanks a freaking lot my dude. The little grommet broke. Just put ot back together with some epoxy and ta-dahh! The freaking stuck lights are gone
best video I have ever seen for help thanks
Thank You this helped me ❤
what a great explanation :) Thank you
This video and the fuse one helped me. But when the grommet falls off (found it on my floor mat) how do you put back on?
Thanks mate.. Good job..❤
Thank you for a wonderful video it helped out!
tThank you very much, only the black rubber fell off
But you saved me a lot of unnecessary money spent at the mechanic
Great video thank you 👍🏼
I just noticed by someone who helped me check out the lights,the brake light inside the car on the back side of back windshield come on,but the ones at out side on lamps don't,I'd have power going to the tail end lamps but not brake lights.
Great video! Question? Is the 15 amp fuse under the hood a low profile mini fuse?
Very good video, great explanation. Can you tell me where the headlight fuse is located? I have looked in the owners manual and it is not obvious. Thank you!
Thank you for the video. What are the signs of a bad brakelight switch. Previously my brakelight stayed on. I replaced the rubber stopper. Brakelight turns off but battery still drains.
Subbed helped a lot thank you…
Hy thanks for your great info.
I'm having a difficulty with hyundai santafe 19 front light are permanently on and can't turn them of I've checked all the fuss they are all ok.
Anyway salutations please?
Thank you.u was helpful.
Can you please leave a link of the new "replacement brake light switch" part if you have one ?
Hi,I recently changed my rear brake calipers and now my brake lights are not coming on. Brakes work great,no lights. Thoughts?
Wow, this was very useful
My 3rd brake light is not going on even after replacing the bulb. Is there any seperate fuses that could be the problem with just that light? All the other brake lights are fine.
Thank you! thank you! thank you! 🙏🥳
Hi!! Thank you so much for your video. Silly questions, my brake lights are working fine it’s the taillight that’s out. Is the 15 and 10 amp fuse the same for the tail lights on the Hyundai Elantra? Thank you!!
will this also work with a hyundai tucson suv?
so nice and clear
Great video
Yeah the brake lights were staying on and I found lil pieces of the grommet on the floor directly under the brake pedal,,I ordered a new one off Amazon, They call it a "Pedal Stopper" 10 bucks free shipping how can you go wrong and it's a Hyundai Genuine Part for the 2012 Elantra which is probably the same on the 2013,,
Great post and it saved me I'm guessing at least $100,, most electrical problems on cars they seem to charge though the ying yang for,,,lol,,thanks for a great post
That's tremendous I am glad that you found the problem.
I also took a wooden paint stirring stick and made a disk the same diameter and temporarily glued it on the metal plate until the part comes,, The paint stirring stick is pretty close in thickness to the grommet,, and it's working fine for now lol
I couldn't find this piece on amazon unless its in a pack with other pieces like it.
Dorman 74015 might be useful
Search Amazon for "Genuine Hyundai 32876-3Q100 Pedal Stopper"
Thank You for the awesome video, can you please share how to replace grommet under the switch
Where did you buy the grommet?
Aren't you going to do the whole history of brake lights what about a biography of yourself? This should only take about 10 minutes. I'm kidding this is a great video you earned a subscriber
I have a 2013 accent. Passenger side brake light isnt coming on, changed bulbs, fuses are good..If the switch is bad would both taillights not work???
this may be a dumb question, it would be the same process for a 2014 elantra right ?
My 2012 elantra middle brake light won't come on, and the bulb is good. The driver and passenger brake lights work fine, any ideas??
I've changed my bulbs fuses are good put a new switch on still not brake lights any idea
Appreciate that boss!
For cars that have a push button start, can the brake sensor switch be the cause of a "delay" in the starting process? Sometimes i get in, put my foot on the brake, press the start button, and it could take 30 seconds or multiple tries before it starts up. For clarity, i have a 2015 Hyundai Azera.
Hi I’m trying to check my brake lights I’ve done all the fuses and they are good but I’m trying to do the bottle part but I can’t remove the safety clip
Question please - My car has a code for brake lamp relay. But my lights are working except the front right turn signal and the bulb is definitely good. Could this affect the front and not the back and come back with that code? Also where does the brake lamp relay go? I have a hard time even finding the part available
Any tips on getting the white clip back in. I’m in Aus and I’m assuming being back to front that is why yours was so easy to get in and out. Took me a hot minute to get but I did it, just can’t get it back in now😢
Thanks. Mine all 3 brake lights doesn't turn on. But I can turn on and off the rear light. Hyundai Reina 2019 Manual.
So this will help me isolate it. I may need to check the brake light switch first and see if it may just be stuck. since all 3 light doesn't lit up when I step on the brake.
^_^ Thanks for this.
Having the same issue. Did you solve yours ?
@@ravierkonan1694 Yes. I remove the brake light switch. I found out that it was stuck. Sprayed it with WD40 and it's working now. Possible dirt made a friction. it's clean and all back to normal.
@@ravierkonan1694 it's easy to remove. It's the same design.
@@ayayotoko i bought a whole new switch replaced everything this man did and bulbs mine are still off.
@@rsnmarkmark14 I have the same issue. Diagnosed the fuses, replaces brake switch but the light are still off while having the brakes depressed :(
Where can u get the grommet from
I only have one side that turns on with break lights but the other side does not. Any ideas?
Thank you sir
The outer brake lights work but the inner brake lamps dont?don't? I changed bulbs already..
What do you think I should do
How do you find a replacement grommet? I’ve been trying to figure out the part number for years
Only one of my break lights are stuck on.. right passenger that is, driver side break light works fine, cant find information anywhere, any tips or answers?
Thanks for you
I remember the days where I could get down under a dash that easily
How do you install the grommet
I have 2014 Elantra and all my bulbs work but only one of them will turn on when mashing the brake? No matter what side I put that bulb on? Does that mean my other bulbs could be bad? I just don't get it if they were bad why would they turn on first of all?
I have a 2013 elantra gls and my switch connector plug is smaller on my car and not like the one shown in this video. I was given the one in your video as a replacement and the connection on the switch is not compatible. I have a different switch with a smaller plug attachment. Are there different switch types for these models?
I know when I bought my switch half way through production they switched to the 2014 switch
can you pls share your thoughts on the manual transmission clutch pedal?. The problem is I can not shift the transmissionthou the fluid is ok. Is ther an electrical switch that controls the shifting even I pressed the pedal? would appreciate your reply on this. Thanks for the earlier info, it helps a lot. and informative too.
I have the same question!
Thanks 🙌🏽
Left tail light and brake light are out the right tail light and brake works even after I changed bulbs I'm assuming it's the fuse
Thank you so much! Given me a few troubleshooting steps to check before a costly diagnosis for my wonky break light.
My bulb is fine but depending on if lights are on/mid/off one light doesn’t function correctly.
I subbed because of this!
I lost brake lights. Changed the switcher with a new part from auto zone and brake lights still not on. Took it to mechanic and said it was the switcher. Why didn't it work for me when i plugged in the new part? The plunger was completely out so the lights should have come on, correct. Went from a $25 part to a $300 repair 😢
I have an Elantra hatchback but only the third brake light stays on. Could it be the same problem with the brake switch?
thanks a lot
So I’m having some weird issues with my driver side brake lights… when the car is driving/idling, the brake light is on. But when I brake the light turns off. This is a new issue, it wasn’t always like this. Also when I hit my brakes my left rear turn signal doesn’t work either. But when I am not pressing my brakes my turn signal works. Also, I just looked under the hood and my car does not even have that first blue fuze you show in the video. I am new to cars and would love some help if anyone has any input!
Hi, thanks for the video. Quick question- I upgraded my Hyundai Elantra 2018 SE base radio to a touchscreen 7" display radio. In this process I connected ignition wire to the battery for the radio and now it's draining my battery. I was wondering if I can tap it into a fuse which turn on only when the car is ON. Can you tell which fuse location I should go for? Thanks for your response.
Cigarette lighter fuse because it only comes on when the car is on
Okay so, what if it's just one tail light .. just one stays on (my driverside) only has been a few days this happening and now my higher mount tail light isn't coming on .. my bulbs are good, otherwise they would illuminate but i was told maybe my brake switch or circuit problem but wouldn't this affect BOTH lights, not jus one ??
This is happening to me on my Hyundai Sonata 2017. Right rear brake light is constantly on when driving. We’re u able to fix it ?
I have changed out the bulb for the drivers side break light, but the breaklight still will not work on that side. The center & passenger side work fine. How do I fix that?
2013 the driver side don't work only the passenger side works, no power on the bulb at all brake light works but the parking light don't. Thanks
I have a 14' Hyundai Elantra the passenger turn signal doesn't come on, when the lights are turned fully on the dashboard lights up the turn signal light. How do I remove the 60A fuse to test it from the multi fuse link?