Spiral Galaxy Resin Tutorial #2, much better result - create a gorgeous 3d galaxy with glow effects!
Vložit
- čas přidán 26. 05. 2024
- These are fun to make - after a few tries at this I was finally able to get a result I was really happy with. Now that I have had some success with this technique I'm pretty sure It would be just as pretty without one of the layers - and the gold is totally optional - hope you love the effect these have!
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Basics Mars Black (base color): amzn.to/302qqHD
WHITE:
Castin Craft white: amzn.to/3e0MYfB
Pearlex/interference violet: amzn.to/3fvPueL
Rezin Arte Luster Pigments
Purple Galaxy: amzn.to/2VNawOM
Found at: www.colourarte.com (She also sells these on Amazon)
Planets:
Pearl beads (there are many places to research and purchase these in different colors)
amzn.to/3gvrsl4
Etsy: www.etsy.com/listing/72321002...
Microbead Shaker
www.michaels.com/signature-mi...
or multicolor options
amzn.to/2YZzL2x
Metallic powder - I use this one because the gold pools and doesn’t disburse into the resin
Mehron Makeup Power
Gold: amzn.to/31XBsQ3
and
Bling it gold: amzn.to/32DoEyp
TechnoGlow powders: I used white and Aqua in this tutorial, but there are other colors you may want to have fun trying
Aqua: amzn.to/30p96eM
White: amzn.to/2WWkFtl
Green: amzn.to/32KdHLH
Blue: amzn.to/30utdbH
Pink (Cotton Candy): amzn.to/2OKvdXW
Coaster bottoms: Clear bumpers (for larger coasters or trivets): amzn.to/3iuAvUY
Coaster molds:
5 inch: amzn.to/31S96X0
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
00:00 Spiral Galaxy (2nd try)
0:36 2nd Layer Planets and sparkle
6:05 3rd Layer color spiral
12:09 4th Layer
21:52 5th Layer clear and gold
25:32 Sand and prep for final coat
26:53 Finished!
28:17 See it glow!
0:36 2nd Layer Planets and sparkle
6:05 3rd Layer color spiral
12:09 4th Layer
21:52 5th Layer clear and gold
25:32 Sand and prep for final coat
26:53 Finished!
28:17 See it glow!
Ķb
In French pls
What size of mold did you use?
ABSOLUTELY DEFINITELY GORGEOUS AS AN OLD ARTIST I AM SO EXCITED FOR ALL YOU NEW ARTIST CREATING NEW EXCITING GORGEOUS PIECES OF ART WITH NEW MEDIUMS WHOSE POSSIBILITIES ARE ENDLESS WELL DONE BE BLESSED
One of the most best galay ever done!
love the "move your planets to avoid galactic collision" lol
You have incredible patience. Your work is beautiful.
Wow! This is amazing. Thank you so much for taking the time to make these tutorials. I’m still semi new to resin and didn’t realize all the possibilities that multiple layers could create!
Amazing results
I've watched this video about 27 times in the past 3 days because I'm getting a tarot box tomorrow and I wanna make sure I don't miss one thing 😂
My son, my youngest son's girlfriend visiting from Georgia, and I, are all going to do this today to bring in the New Year! Excited to share how it turns out with you! Thanks for this video!
It looks amazing! You put a lot of time and effort redoing the lines as the lines disappear as the resin is still runny . If you had let it cure bit more, you could get the lines to stay in place with less effort. I too leant the hard way. Anyway the final result is awesome! Well done 👏🏻
This is one of the most awe-inspiring resin videos I’ve ever seen! Thank you so much for sharing!
These are fantastic, out of this world, pun not intended, but so stunning.
Incredible! I was completely mesmerized watching you do this!
WOW I can't even say anything else but Gorgeous!!!!!
Good grief, they made you work for those amazing results!
Chantal Cross LOL! I prefer to think of it as a forced victory 🤣
I don’t know what it is that makes videos like your’s so mesmerizing like someone commented before. Anyway, it’s a beautiful work of art. Well done!
The best galaxy I've seen
Thank you! You worked so hard on those! They are gorgeogous. I'm making a sculpture with resin bases for top and bottom. This gives me lots of ideas for the top!
Genius work! I clapped at the end😄
This looks amazing!!
Beautiful!
Wow these are stunning !!!
Amazing.❤
so freakin gorgeoussss!!!!
WOW!!! These are stunning!!
These are absolutely stunning 😍
Those turned out AWESOME!!!! 🪐👍
Wow absolutely stunning .
Absolutely stunning! 😍
Love this piece thank you for sharing :)
Gorgeous work!!!!
Wow amazing 💙💜💙
WOW! Beautiful!
Thank you for sharing your hard work, these are stunning! Don't know why anyone would down view this. So much effort in the resin work and filming! I also love your time-line in the description ❤
Trolls are have ugly motives and nothing better to do then to try to tear down those who create beauty.
Stunning wonderfull i love it
Beautiful♥!
Love them... cant wait to try 😁
Gorgeous
Very beautiful and a lot of time and layers
ABSOLUTELY STUNNING 😍
Dope as Heck!!!! AMAZING job!!!!
This is Amazing 🤩
Lol‼️ Galactic collision ‼️😂😻
Those are magnificent.
They have a great glow effect even with the lights on. Wonderful art work!
Beautiful 🤩 best I’v seen !
Your work is outstanding!!!!
Absolutely Outstanding!😊
Beautiful….inspiring. Thank you for this very informative tutorial.
this was amazing to see, thank you!
Just beautiful and very detailed, thanks for the awesome tutorial....
amazing work❤ thank you so much
Gorgeous work! Thank you for sharing all the steps and materials used. I can't wait to try making galaxies and nebulas!
I really enjoy watching your videos, you do awesome work.
That was a lot of work, but the results are amazing! Looking to do something like that on a bigger scale. Thanks for sharing!
Beautiful
Omggg amazing
Gallatic collision 😂😂lovely work
it is amazingggg
Very pretty
Wow! Incredible hard work
Wow, only catching up with this now. It's amazing technique!
this is gorgeous im going to try it
Thank you.im just starting out at doing resin coasters and doing a galaxy was one i wanted to do.those are really cool
Thank you so much this is amazing. I going to make a tray and coasters !
Amazing thanks
Amei !!!! Já quero tentar 😍😍😍😭
wow!
wooww. thank you
Awesome
Beautiful :)
Maravilhoso perfeito ❤❤❤
Wish I could give it ten 👍!
Nice😍
Это очень красиво!!!!!
This is just so breathtaking! And the steps you guve us to break it down. Just a billion thank yous from a fan! Can I ask what your using in between heating?
Absolutely beautiful!!
I love these! Gorgeous!!! How do you keep the resin from bunching up on the bottom??
C est beau
Beautiful!
Do you think those metallic microbeads will sink down when used in an epoxy table (2 inch thick)?
Умница!! Молодец! Супер!
"move your planets around to avoid a galactic collision" LOL
Georgous
Hi again! Where did you get your little spoon? The one you use to scoop out the beads. Thanks, again!
Hi! Love, love, love these! Going to try it soon! What grit of sandpaper did you use to sand these? Thanks so much for sharing!!
I used a 120 grit on a dremel (see my sand and prep video for links :-)
@@ResinAsYouWish , thank you!
These are incredible. If you don’t mind me asking. What kind of Resin do you use, I always feel rushed doing small things. I’m not sure how to get the info. New to youTube. Thanks
So beautiful ❤️ thank you just wanting to know where did you get your Micro beads from?
hi, there is a link to the microbead shaker in the video description and a couple other options of places I have found them
Hi, these are amazing!!! When you put the final topcoat on, I noticed you didn't have the coasters in the silicone molds, do you tape the underside or what happens to the drops from the topcoat. Thank you very much
I am wondering that too
Exactly... didn't show the back side of coaster either.
You are bad ass!
Christy you know your like the galaxy... out of this world 😆 but thanks for the more in depth because I did it and haha wasn’t even remotely a circular sphere in middle more like a blob I did even go back after a couple of hours to redo but still didn’t have the distinctive circles will try again.... 🥴
You would definitely giggle if I could send you my picture of the attempt
Caron Stone lol! I seriously have like 3 reject blobby spiral galaxy coasters in my craft room that have spurred me on this journey! I feel like I have to keep going and going drawing the spiral, then suddenly - it’s right. If you look at the first spiral layer after it cured - it’s definitely NOT impressive 🤣
Resin As You Wish Well that makes me feel less of a failure haha you do make it look too easy ! 🤗 my first one I put too much color in my spiral and when it cured it literally took up entire space I’m like okay that didn’t work no space background here! 😳
I realize this is an older video, but I am just discovering resin work and if you ever have time to answer, it would be greatly appreciated.
1. Did you set out with a specific number of layers in mind in regards to the "galaxy swirl"? Or did you continue layers until you had the look you wanted? Do you think the result could possibly be achieved with less layers?
2. Was the Galaxy purple one you premade and somehow store or do you make it fresh each day? I ask because the container looks like it's not made daily.
3. I couldn't really tell, is your curing process time, UV, or both? And if I have that completely wrong because I saw UV lamps in other videos, I apologize.
4. Are your color combinations in any type of formula, such as 2 spoons of blue to 3 of a red? Or is it half and half? Especially with the color shift. If it is a formula, did you trial and error or find them online? The effects possible seem endless with just colored resin. Then I see what the alcohol ink does in other videos and it's blowing my mind.
I don't know if you do this as a hobby or a job, but you are very talented. Artists have so may mediums to work with, I love finding new to me types of art. Regardless if you can or want to answer, thank you for sharing/teaching the Galaxy Coaster creation process.💙
Hi. I did have a specific layer amount in mind - the base, the backdrop, then the glowing/white swirls - after that you don’t have to keep going but the 3 dimensional effect was what I wanted it to be. 2. The galaxy purple is a mica powder from ColourArte and I don’t pre mix - each time I mix the colors it’s right before I’m ready to work with it. Each color I use is clear resin mixed with the color 3. Most all of the resin I use for coasters or trays will be epoxy countertop resin - so it stays flawless when using them. I don’t have UV resin, but I have used the uv light on gel nail polish. (Dragonfly coaster) 4. I do not use a formula on the color combinations, the mica powders such as the interference or shimmer colors go a long way, I add the powder in small amounts until It’s where I want it. You can find these online, at craft stores and you can use acrylic paint in resin as well. I’ve put links to everything I used in the video description.
Thank you for the compliments, I don’t do this as a job, but I love it and I look forward to it every day
Question how do you keep from over heating your resin with the torch causing the mold to stick to your piece when you unmold? Beautiful work
Hi, I do still have the mold stick in spots occasionally, but typically they don't. I don't hold the torch or the heat gun close to the mold, just far enough away to ripple the surface. Once i get the resin where I want it, I stop using the heat gun and switch to the torch. the rule of thumb on the torch is to hold it at least 3 inches above the resin. One thing that will always make the mold stick (I've noticed) is if you fill the coaster to the rim.
Mrs. Resin the white speck of stars is that effects from the microbeads? on their part: 1:58 went to Ur YT Ch. you make beautiful products, TY for sharing ur work
Yes, those are the micro beads only - thank you for the compliments ♥️
@@ResinAsYouWish : ok thank you Mrs. resin I'm sorry I don't see ur name up juz used ur Title, wowee ur pieces are fabulous hope to see more up coming videos👍🏼,
😍😍😍👏🏼👏🏼👏🏼
What resin do you use?
💖💖💖💖💖💖💖💖
Hello I have a question, I have resined art wood projects and i am able to get the bubbles out of it with out any issues but when I made my last three clear coasters with stones, shells and rocks there is this sandy bubble looking effect. I used a heat gun and no other bubbles popped. Can you help with finding out a way to fix that? Thanks in advance and love your stuff :)
Hi, I can only guess a little on this because I don't typically use sand, So I don't know if the sand itself is causing the sandy bubble effect. So a couple things to think about. If you fill in the coaster all the way as soon as you are ready to pour, the bubbles at thee bottom will be too deep for the heat gun to get to them, which could lead to overheating the resin which MAY be the reason for the sandy bubble effect. My suggestion is to pour in the clear in thin layers, heat/pop, then add more and repeat. Another thing you could try is to mix your resin, let it sit there for about 30 minutes in the cup - it will feel warm, but most of the bubbles will pop before you pour it. The amount of time will vary depending on the type of resin you use - hope is helps!
@@ResinAsYouWish Awesome thank you for the tip. I will try to see if its cause i dont let it sit till the bubbles pop and i also just do a big pour. Will keep this in mind for future coasters down the road :)
I tried this the first application of the purple swirling it around it just turned into a purple circle no swirls at all and I swirled and swirled and didn’t work
I'm new to epoxying and I want to know what kind of gun you're using with that nozzle is. I bought a heat gun but it produces too much heat and AIMS in too much One direction direction and tends to mess up my stuff!!!
Hi I put links in the description- let me know if they don’t work
With the purple galaxy was the layer underneath dry please x
Yes, I let each layer cure enough to tap on (but not fully cure) so usually about 12 hours
Where did you get the planets from the beginning? Are they all gold colour?
Hi, I posted links in the comments of the video - they’re gold/silver/opalescent colors all mixed together