Spiral Galaxy in Resin, create a 3D galaxy with planets and glow effects
Vložit
- čas přidán 20. 07. 2020
- Glow Spiral Galaxy: I am definitely going to try this again using a couple other ideas on how to do it. I had a lot of fun trying it - thanks for watching!
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Base Layer: Carbon Black by Liquitex acrylic ink: amzn.to/2VMtJjT
WHITE:
Castin Craft white: amzn.to/3e0MYfB
Rezin Arte Luster Pigments
Purple Galaxy: amzn.to/2VNawOM
Pearl blue/interference blue: amzn.to/393CHyg
Found at: www.colourarte.com (She also sells these on Amazon)
Planets:
Pearl beads (there are many places to research and purchase these in different colors)
amzn.to/3gvrsl4
Etsy: www.etsy.com/listing/72321002...
Microbead Shaker
www.michaels.com/signature-mi...
or multicolor options
amzn.to/2YZzL2x
GOLD
Metallic powder - I use this one because the gold pools and doesn’t disburse into the resin
Mehron Makeup Power: amzn.to/31XBsQ3
and
Bling it gold: amzn.to/32DoEyp
TechnoGlow powders: I used white and Aqua in this tutorial, but there are other colors you may want to have fun trying
Aqua: amzn.to/30p96eM
White: amzn.to/2WWkFtl
Green: amzn.to/32KdHLH
Blue: amzn.to/30utdbH
Pink (Cotton Candy): amzn.to/2OKvdXW
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
4:38 3rd Layer (2nd Spiral)
7:25 4th Layer (add contrast)
22:21 5th Layer
31:04 Final Coat
37:42 Finished
39:04 SEE IT GLOW!
I keep making to much resin and over working it how many tries until you got the result you were after?
@@mindygilliam8624 hi, I think I have about 5 gooopy looking spiral galaxy coasters in my ‘dud bin’ I had to be patient when adding the color - I did a 2nd video on spiral galaxy where I had much better success
pro trick : you can watch series at instaflixxer. Been using it for watching all kinds of movies these days.
@Gustavo Tomas definitely, been watching on instaflixxer for years myself :)
@Gustavo Tomas definitely, I've been watching on InstaFlixxer for years myself :)
Love love love them!!!!
Fantastic, I'm in awe of your patience and artistry. Looks so amazing. Thanks for sharing.
I have looked up a LOT of galaxy video's and yours is the most clear and beautiful!! Thanks for sharing!
Thank you! I’ve done a lot of trial and error with them - they’re my favorite
Most beautiful resin coasters I have ever seen. Thank you for sharing.
Outfrickinstanding! Amazing work!!
Thank you, so beautiful, and you are awesome and kind for sharing 🙏💛
Wow very awesome love it 💙💜💙
This is an awesome video. You are really talented!!! Thank you for sharing!
This so cool. Love them.
Stunning!
I really like this design
Wonderful! I so love your videos!
Amazing as always!!
Please please please tell me the color you used that cured blue. You’re an amazing artist and my favorite artist for resin. Thank you so much for your kind tutorials.
Loved it amazing 👉🏻👍🏻
Good job👍👍
Looks great! Thank you for sharing! Do you wait for your resin to set up a bit before starting on the spirals?
Alejandra B I didn’t on this coaster, I’ve been experimenting and the next one I’ll be timing how long to wait before starting the spiral
@@ResinAsYouWish Oh, okay. Thank you! Looking forward to see how it goes.
Love this! If I wanted to try this as a paperweight I am Thinking I would just reverse the steps because the top of the paper weight as it is being made would be the bottom and then we flip it over....
sounds like a great idea! I'd love to try paperweights but I haven't gotten to it I want to see when you are done :-)
...will do! I have only just started to do those !
Another Beauty Christy I too was looking forward to this one and as usual didn’t disappoint 😍🙏 somehow I got confused and maybe it was lighting but in the 3rd or 4th layer you were using purple galaxy but not sure if it was the bling it blue interference that turned the purple blue but it looked like it was blue while actually putting the spiral in...? And my next question is the center when you defined it was that the gold interference or blue? But that teal glow powder I love I use it too even in the bottle it’s fun to put the black light on it! Thanks again for your perfection and showing us how you pay attention to detail! Your the best !
You are right, the Interference blue takes over the purple - I really love the ghostly effect it adds. I have noticed that the "Purple Galaxy" always cures on the bluer side, but this was the first time it looked like I cam back to a different project the next day :-) The 5th layer is the only layer where I crack out the gold, and don't use the blues at all. One thing I did learn when doing this video is I didn't make it clear on between 22:21 and about 25:00 that I let the resin sit for about 15 minutes to make it easier to manipulate it. I also learned in the course of using the glow powders, - I mixed both powders with Interference blue that they look EXACTLY the same when using them - so I should have just picked one color when it glows, you can see slight color variance between the two, but only, because I knew I used two
Resin As You Wish . Thanks for your response also I saw that the resin was setting because saw the stringy texture but yeah terrific I will try them myself but I already know I don’t have the patience you do😉😘
Curious to know why you sand and put a top coat on ? Don't you use a table top resin?
HI, when using a mold for coasters the resin creeps up the sides and when you pop it out, it has a sharp edge to it, the alternative would be using the bottom, but for me that takes the fun out of the design
here is a comparison: (go to 12:28}
czcams.com/video/uu7-6snHEZk/video.html
Patty Ruland hi! Please check the comments on this video for details czcams.com/video/uu7-6snHEZk/video.html