The stunning effect of layering Alcohol ink in resin: Vibrant Rainbow and ocean colors
Vložit
- čas přidán 1. 06. 2024
- So I've been asked if I would do some strictly alcohol ink coasters and here is my version of alcohol ink coasters where you flip the coaster over to see the finished design :-) from the bottom. This technique is so stunning. The way you mix the color gives a textured and lovely effect. I will be doing a set of standard size 3.9 inch coasters using this design to show how it looks on a smaller scale. Enjoy!
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
00:00 Layering Alcohol ink
00:15 Mixing your colors (prep)
03:15 Layer 1 (clear resin/alcohol ink)
11:29 Layer 2 (repeat)
17:53 Layer 3 (repeat)
23:33 Base Layer
24:32 Sand and Prep
26:38 Finished
I am an Amazon associate; I receive commissions from the qualifying links to amazon listed below:
Alcohol ink white: amzn.to/38ttAGZ
Brea Reese Alcohol inks: www.breareese.com/product-cat...
“orange, orange”,
“yellow Jaune”
“purple-violet”,
“Turquoise, Turquoise”,
“cobalt green”
Tim Holtz alcohol inks Red and Blue:
Tim Holtz Watermelon: amzn.to/3lIa568
Tim Holtz Sailboat Blue: amzn.to/3ito3GX
Pink:
Pinata Jacquard senorita magenta: amzn.to/2OlEVn7
Fineline applicator bottles: amzn.to/3jAgFJb
FUNSHOWCASE Coaster Mold:
5 inch: amzn.to/31S96X0
Typical tools I use:
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Mini glitter spoons/mini funnel: www.michaels.com/scoop-multip...
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” even though the packaging is called painters tape (the guys ate Lowe’s explained why I couldn’t google it (LOL) amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu
Resin I used: MiraKleer Table Top: amzn.to/2Zl9ziR
00:15 Mixing your colors (prep)
03:15 Layer 1 (clear resin/alcohol ink)
11:29 Layer 2 (repeat)
17:53 Layer 3 (repeat)
23:33 Base Layer
24:32 Sand and Prep
26:38 Finished
Stunning
Love your work
Gorgeous
My jaw dropped somewhere during the video. Amazing outcome. Happy crafting.
The heat from that torch is going to shorten the life of your molds. It also causes the resin to start sticking to the edges. Better to use a heat gun. Beautiful work.
A mist of alcohol across the top will pull-up and pop all the bubbles.
The torch is fine as long as you hold it high enough from the resin. You are correct that it can definitely mess up the molds. The molds are cheap so I don't really care when they break because I want the piece to be pretty and bubble free. Over heating the resin will make the resin age faster and yellow if you aren't careful though
Beautiful
So very beautiful. Thanks for sharing your talent!
Beautiful. Gorgeous colours 😍
Absolutely beautiful! Thanks for this video!
Absolutely beautiful
Gosh I love your work! Especially when you experiment!! So fun
It’s like marbling on resin, nice
Impressive! Thank you.🤗
Amazing ! 😍😍😍 it’s really Beautiful 😍 good job 👏🏻👏🏻😍🇪🇬
Ohhh wow alcohol ink always brings beautiful results and these are no exception! Just stunning 💖💖💖👏👏👏🇦🇺
Your work is flawless. I’m a fan!👍🏻👍🏻
Absolutely gorgeous
Just started making resin
I can only hope mine ever looks this good
Gorgeous !!!
Wow, these are fantastic! LOVE!
Beautiful!! Love … the layers!
So pretty, love the colors!! Great job!❤️
Stunning.
Beautiful coasters. Love the colors.❤️❤️
Espectacular
You’re so good at thin layers having such dimension! Beautiful.
Very stunning! I love how bright the colors are. 🌈
These re beautiful, great work 🤗😘🦋
Absolutely gorgeous! Love your technique and colors😍🤗😍🤗
I’m going to try this. If you add a bead or a small metal ball bearing in the jar it will make it easier to shake the colors
Beautiful. The patterns achieved with alcohol ink never cease to amaze me.
I’m going to have to stick to verbal and/or voice over videos. I miss too much in the captions and fast pace.
Sorry.
However, my lack of knowledge doesn’t mean that they’re not absolutely beautiful!
The first layer looks very rose like in the finished coasters. So pretty!! Idk what I'm doing wrong but so far i haven't been able to get the alcohol ink to move much. Too chilly maybe? I'm a beginner, so lots of time to get it right and dial it in! Thank you for your videos!!
Adirondack has alcohol blender which is basically the highest concentration of alcohol. If you use that to drip into your mix, the colors will float into each other more easily. Alcohol ink needs enough fluid to blend and if you use too little or it’s too hot where you are, the pure alcohol (uncolored) will be needed. It can also create great effects. Another thing that makes it move is using heavy alcohol ink with lighter ones. Heavy ones are white and those with metal color. The heavy ones will move to the bottom sinking through the others.
I love this. They came out beautiful. I did not see in the list of supplies the little caps you put on the bottles of ink with the white in them. The spouts look much smaller the ones that come with the regular alcohol ink.
Hermoso
These are stunning! And your edges are so rounded and perfect! If you have a sanding tutorial I must find that!
Lol! Here you go: czcams.com/video/uu7-6snHEZk/video.html
@@ResinAsYouWish oh my gosh, thank you!
These are gorgeous, do you sand the backs after. I like the way you have your signature in them.
This looks so awesome! Will definitely try this awesome technique. Do you think you could do a tutorial on making rose quart coasters?
I will try!
Thank you for the video!😮 What kind of a epoxy are you using? Can you add glitter?
I tried to watch it, but it was just so noisy, I fast forwarded to the end to see the finished pieces…..which were pretty!
Very cool practicing. What do u use after u sand to make them shine??? How long to dry?
Thank you for sharing amazing.a question when you turn the coaster over to do the back and place back in the mould do you find the base drips to the front
Yes, but I sand it smooth 👍
Stunning! Is it just alcohol you splash on lightly, just before the swirls?
Hi, no i have the tape sped up double time, so what you see is just fast motion of the alcohol doing the swirling thing it does. I didn't squirt anything on it :-)
What type of white paint did you use to mix in the alcohol inks
How long do you wait between layers?
how many hours did you wait in between the layers or was this all in one day?
where did you find the little tips for the alcohol ink bottles?
You always do beautiful creations. How long do you allow epoxy to dry in between layers
I just let it harden enough to tap on. The resin I use takes 3 days to fully cure, but I'm usually on the next layer between 12 and 24 hours.
Gorgeous, I have a question do you have to use the white with the alcohol inks?
to get the textured effect, yes. By mixing them before hand, you dont see the drops that sink and settle.
Can you mix UV resin in epoxy?
i hate to give bad reviews,and you had some excellant results but you covered them up,alot of resin and colors which could of had been shorten and the white mixed as most know give some very pretty results,which i saw but were only covered up by another layer,i dont understand the purpose of mixing white into the colors into bottles,which could of been done by the dropping of white color unto the colors for a result but done with less time,and items.,reguardless the end result was very pretty
Where did you get the bottles you use to mix in? I love the tips!
Hi! The bottles are linked in the video description- they are called fineline 👍
Are your colors so opaque and bright cause mixed with white?
Yes - each color is mixed with white alcohol ink
What type of white paint are you using to mix with your alcohol inks. Can't see the name in the video
It’s this: amzn.to/38ttAGZ - all of them are linked in the video description 👍
MiraKleer resin is not currently available on Amazon, not known if available again. What resin do you recommend /use otherwise?
Ok, my error, not available in gallon size. I’m a putz.
Grrr will not ship. No problems last time I ordered, now no address works. Are you having issues now getting this shipped to Alaska?
Hi, only certain vendors send to AK, when Amazon has it in stock I usually grab some - pro marine is another that may or may not ship to AK but I find it on Amazon from time to time. The epoxy resin store will always ship, and I like that resin - but it mixes thinly and you have to get used to it
@@ResinAsYouWish Thank you, love your work.
One more question, y is sand paper done in the last and then clear resin poured
hi, here is the video explaining why I sand: czcams.com/video/QZzwGo3XUkI/video.html
how long did you wait to do inbetween layers time.
Hi I wait until the resin is hard enough to tap on. This is usually overnight (cure time on this resin is 3 days) So no set time, I usually just work on them in the evening and then come back the following evening.
They turned out great but I was wondering why the backs looked the way they did? Also the only thing that stops me from making and selling these is that alcohol inks fade and won't look as good down the road.
Julie, theoretically speaking, if you use a good quality resin that has UV protection built into it your colors should stay on point. But I am a resin NOVICE. I use alcohol inks all the time. Paintings and ornaments I use several (3-4) coats of Kamar and 2 of a sealant. So far I have had good luck with this technique and after having one treated painting and one untreated painting in the same window, the results are shocking!
@@zarraCO if you say so 😃
Why is heat gun used after pouring clear resin in all layers.
I use the heat gun to pop the bubbles
Whata is in the white bottle?
Which ratio it is?
Please reply to my comment I am having a lot of problems 😔
The white/color mixture is 3 to 1, it is important the resin was mixed and let sit for 15 to 20 minutes, this affects how much the ink will sink and don’t stack more than 3 drops in top of each other
I am having problems too. My white/color mixtures are “grainy” (for lack of better description).
Totally wonderful. The repetitious music is annoying
Your music is a little HEAVEY...
How about some Dialogue. That's what teachers do.