Easy to use Sharpening Kit from Mohoo | Banggood Tools
Vložit
- čas přidán 3. 06. 2024
- Easy to use Sharpening Kit from Mohoo | Banggood Tools
I hate sharpening my chisels and hand plane blades. This jig made it a bit more manageable and less time consuming.
Shopping:
UK
- Part A Honing Guide - uk.banggood.com/custlink/33vV...
- Part B Angle Fixture Gauge - uk.banggood.com/custlink/3mKF...
USA
- Part A Honing Guide - usa.banggood.com/custlink/Km3...
- Part B Angle Fixture Gauge - usa.banggood.com/custlink/vvD...
Disclaimer*
I have been sent this tool free of charge by Banggood, however I'm not being paid or asked to say any nice things about this product in my video.
All the information and thoughts in this video are my own.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#banggood #woodworking #sharpeningjig
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe. - Jak na to + styl
Quite a common occurrence on Banggood unfortunately. They often split sets up and then the price goes way up compared to what you thought it was originally.
I notice that as well, and i couldn't justify basically buying the set for more than £50. I got the trend honing system for £35 on amazon prime day.
I’ve got one these and it’s a really good system. I bought a second honing guide so one is permanently set up for sharpening plane blades with wheels inside and the other is set up for chisels. Personally I only sharpen to 1000 grit then polish on the strop but I sharpen fairly regularly to be honest. Regular sharpening for a couple of seconds works better than irregular but spending 5 minutes sharpening stuff
Yes thats what I started to do now as well. Rather than spending half a day on sharpening everything once in a blue moon I do it on regular basis now. Its just easier and quicker for me to do now.
I think splitting the set is actually somewhat justified for these products. I've got both, and while I definitely appreciate the angle fixture gauge, I found that 80% of the value is in the honing guide. Using a flat reference plate, you can set the chisel in the honing guide and match the current angle to within 2°. With basic trigonometry (or eyeballing) you can work out the distance the chisel needs to extend from the jig for resharpening at other angles.
Just to let you know the rollers are available from banggood for 9.99 for 2pcs. I also have the same set and would agree it is very well made, also the advertising can be a bit misleading if you’re not aware. Ps. Love what you do, been following your channel for around 5 years keep up the good work and best wishes for the season to yourself and family.
Thank you so much for being with my channel for so long. All the best and Merry Christmas to you and your family 🎄 🎅
Just get some cheap 635 2rs bearings and replace the rollers with some thin washers in between. Much nicer feel and cheap to replace. Hard steel and last 10 times longer at least.
Very helpful video - thanks. I bought the two units recently and they arrived today - no instructions included so your video was super-useful! Like yours, mine arrived in two separate boxes, but I notice that the larger box also has a moulded foam section which the honing guide fits into perfectly, so I'm guessing that maybe originally they did sell the two items as a single purchase - strange waste of packaging!
Glad that my video was some help. Maybe they wanted to earn extra money by making separate products...
A lot of listings are like this one, all they had to do was add a third picture with both parts and the appropriate price, that would have been far clearer!! Another nice piece of kit, made from nice and chunky pieces of aluminium 👍
I also hate sharpening and think I've only done it once or twice in my life ... hopefully that'll change when I make my water based sharpening system using diamond lapidary wheels (but don't hold you breath) 😁
Exactly, shame they make it unclear at first glance, especially when this is actually a very good jig.
Fantastic review, Tomasz! Thanks! 😊
Stay safe there with your family! 🖖😊
And happy holidays!
Thanks, you too!
Looks great.
Thanks!
It’s a great honing guide, bought on3 myself after seeing it recommended on hooked on wood. Beautifully made. The brass wheels are now available as a separate spare part; I bought a set as well
Need to get the spare set as well just for the future
Very nice great information thanks.
Glad it was helpful!
I like this sharpener apart from 1 thing. The brass wheels rub directy on the bolt and start to get sloppy after a while. I think this was done intentionally so that you have to keep buying the spare wheels. I replaced my brass wheels with some 635 2rs bearings with small 5mm thin washers to space the bearing to the same size as the brass wheels. They are exactly the same size as the brass wheels and the bolts are a nice tight fit so that the bearing sits properly and clamps up so that only the outer bearing rubs on the stone. If you think you had a smooth sharpener before, you should get ready for a whole new feel. It should have been made like this to start with, the bearings will last many times longer, and the bolts never get worn out.
I like your idea of replacing the brass rollers with 635 2RS roller bearings. Did you put one or two roller bearings on each side?
@@robinguysharman I put 2 bearing on each side with a small washer as a spacer between them. There were 2 fitted nearest the body of the sharpener. so inside out, 2 washer, bearing washer, bearing and washer. Comes to the same width as the original and the bearings clamp up so that the middle doesn't rotate on the bolt. Only the outer of the bearing spins and only that bit gets worn. Ther're hardened steel, so will last ages and are cheap to replace. The action is so much nicer.
I also have a veritas mk2 and am trying to find some bearing to replace that roller. Odd size, but I'm looking.
@@paullisi1137 Thanks very much - nice clear description of the structure. I've just ordered 4 bearings so will soon be a Honing Hero!
Great tip thank you for sharing
Keen to buy one as well, but the brass wheels sound like as if they are not the propper material to use on stones (wet or diamond).
Was thinking to look for something the 'richard kell no.2' honing guide uses.
Ultra-high molecular weight polyethylene roller (UHMWPE).
Durable and stone friendly.
Just need to search if there are stock size rollers that found fit this guide.
świetna recenzja :)
Dzieki 👍
The stones should be in water for at least 30 minutes before you sed them. The grade of those stones are not exactly reliable but still, before the strop they can do a good job.
As I said I'm not a pro at this, as long as they sharp my chisels to a reasonable level then I'm good
Every tool is perfect as far as it's perfect for us :)
@@CasualDIY
I got veritas MK2 and i am not very satisfied. I don’t get a straight balde or a right angle. The solution with two rollers seems to be better. I think i will try it.
That's why I think this jig is better that others. So much easier to use it
Merci Thomas pour ce retour si toi tu aimes moi j'ai pas encore essayé mais juste regardé chez Tormek mais le prix 😒 c'est pas des outils que je me sert tous les jours donc l'investissement est élevée mais concernant ton système la pierre dans le temps elle ne va pas se creuser ??
Eventually the stone will get damaged but that's after some very long and heavy use
I got it few months ago an yes i just got part A when i was thinking i am buying all set. So for now i am only using part A. Can you let me a distant (when you set it up for 25 and 30 degree angle) from part a to the end of chisel. Thanks. It is looks like i have really similar sharpening stones too.
For 25 degrees it's 8.4cm and for 30 degrees it's 7.3cm
@@CasualDIY Thanks for that
Deliberately intended to mislead, I've noticed this for a while with some Chinese vendors
To be fair it's the first time I've came across this. But I wouldn't be surprised if there was more. Just have to read the description very carefully.
Good, but expensive. Unfortunately I or someone, lost one of the wheels. No spare parts available.
One of my viewers commented below he bought some spares. Maybe you could ask him for a link to spares? And yes as for two part system is quite expensive however the quality is there I think.
The wheels are separately available, I’ve bought a set
These are not 'Banggod tools' Banggood is just an aggregator, just like Amazon, and some of their members tools are fabulous, and yes, some are junk, although more to do with design than quality
It's a figure of speech. By Bangood tools I meant that you can buy them there, and it clearly indicates where the tools were made.
And yes you can get some gems for good money but there's also a lot of products that should be avoided.
Too match OKE´S Stop with this please