2JZ-GE Spark Plugs & Wires Replacement (Toyota Supra - Lexus IS/GS/SC 300)

This video is made as a guideline to show you how to replace the spark plugs, wires, and coil boots on a 2JZ-GE.
This process will directly apply to any vehicle with this engine, such as the USDM Toyota Supra, as well as the Lexus IS, GS, and SC 300.
I hope it was helpful!
Torque Specs:
Spark Plugs: 13 ft-lbs
Ignition Coil & Wires Routing:
Cyl. 6 Coil  Wire to Cyl. 1
Cyl. 4 Coil  Wire to Cyl. 3
Cyl. 2 Coil  Wire to Cyl 5
Parts used in this video:
- Spark Plugs: DENSO 3353 Iridium Long Life (you can also use NGK 3764 Iridium)
- Ignition Coil Boots: DENSO 6716286 or NGK 58911
- Spark Plug Wires: DENSO 6716181 or NGK 6404
Tools used in this video:
- 3/8” Ratchet: amzn.to/37i5Yph
- 3/8” Deep & Shallow Sockets: amzn.to/3NTAGtA
- ¼ Inch Long Handle Ratchet: amzn.to/3pNDKPX
- ¼ Inch Socket Set: amzn.to/2U0tikz
- Allen Socket Set: amzn.to/2Q6VYGp
- Spark Plug Socket: amzn.to/38EGt5j
- 3/8 Inch Drive Extension Set: amzn.to/46QdQM0
- ¼ Inch Drive Extension Set: amzn.to/3O1WLX4
- ½”, 3/8”, ¼” Universal Joint Adapters: amzn.to/3Oecun4
- 3/8” Torque Wrench: www.harborfreight.com/38-in-d...
- 3/8” Bauer Impact Gun: www.harborfreight.com/20v-bru...
- Bauer Impact Driver: www.harborfreight.com/power-t...
- 20V 3Ah Bauer Battery: www.harborfreight.com/20v-hyp...
- 20V 5Ah Bauer Battery: www.harborfreight.com/power-t...
- Silicone Paste: amzn.to/324uWFi
Other related videos:
- 2JZ-GE Oil Change: • Changing Engine Oil on...
- 2JZ-GE Head Gasket: • 2JZ Head Gasket, Timin...
- GS300 Upper Control Arm: • Replacing Front Upper ...
- GS300 Rear Brakes: • Replacing Rear Brakes ...
- Lexus GS300 Playlist: • 2001 Lexus GS300
Disclaimer:
Due to factors beyond the control of AutoFix, I cannot guarantee against improper use or unauthorized modifications of this information. AutoFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. AutoFix recommends safe practices when working on vehicles and/or with tools seen or implied in this video. Due to factors beyond the control of AutoFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not AutoFix.

[@pongstatus7268]

Great stuff! Just wanted to mention your 2jzge rebuild video you made a few years ago was probably one of the most influential videos in my automotive career. It gave me confidence to wrench for a living and jump started my career. Now I am working as a Master Tech for Toyota and constantly rebuilding engines, doing full overhauls, and electrical diag. Keep up the videos and thanks for the help/tips!

[@AutoFixYT]

Wow that's amazing! Congrats! I do actually remember you from commenting on that video years ago. As soon as i saw your username I knew haha
Since that video I have also become a tech and I have learned so much more. I'm glad that video was able to kick start your automotive career, as long as you have an interest and are passionate, and are confident in what you're doing (or at least trying lol) you can get pretty far!
Keep at it, learning and advancing never stops!

[@Pallidus_Rider]

you are very intelegent

[@maliknolan5711]

Great video I own 05 gs300

[@AutoFixYT]

@@maliknolan5711 awesome!

[@TheVideosdedaniel]

Very disappointed on the wire issue 😢
You should have taken the time to at least cut and splice

[@AutoFixYT]

Cut and splice what, I had no parts. It was a temporary fix until I got parts lol. To fix it right it needed new pigtails, those connectors are always broken from all that heat.
Regardless, doing what I did was better than leaving it as it was for the time being.

[@user-jk9yx2iq4p]

you are very intelegent

[@rexisretro]

you are very intelegent