Video

why is the exhaust heat shield missing?

Does it have to be torque to the exact number or can I just do everything with a wrench ?

If you use 50% acetone and 50% Automatic transmission fluid instead of WD-40 or any spray rust repellent it works better. The acetone eats the rust almost immediately and the atf helps it wick down the threads because it thin. Also if you can hit it with a hammer first it will shock the rust loose. The go tighten just a little bit and then loose. If it starts to bind go tight then loose then tighten then BTW, ALWAYS USE A 6 POINT SOCKET.. NEVER USE A 12 POINT SOCKET.. If you don't have a 6 point socket go buy one,or rent one, or borrow one... You'll thank me later

Thanks

Did you upgrade to the LS400 big brakes?

GOOD JOB!!!!!!

Above and beyond average mechanicing I was very impressed! Thank you! So it looks like GM modules may not actually be the culprit but the fuse circuit capsule!

One of the best oil change instructions.

hello again man , any advice for broken glovebox its broken wont open been searching for any tip .

Nice video! The windshield is sealed when installed. The rubber trim pieces are just decorative. So, water ingress is likely occurring elsewhere.

The transmission fluid is brown... and you didn't even put a new filter in, shame on you.

When taking the caliper off and back on can the piston get out of place and need a c-clamp to be properly seated? I'm having some brake problems after doing this fix, and am trying to figure out the cause.

Just today my alternator on my 1994 Toyota wagon DX broke. And thanks to your video I will be able to do the job on my own, thank you.

Any recommendations or tips on how to seal the windshield?

Great video I own 05 gs300

it was helpful, i appreciate it.

The fact you don’t have more likes on this amazes me 🤯 amazing video man

Excellent video, thanks mate.

I have a 03 accord v6 and my hood struts don't work either lol

You can by a high quality brand new power steering pump for a 2003 Honda Accord for less than $40. I purchased one 5 years ago and it is it still working like the original. Why spend time and money rebuilding one?

Life changing video. I come from a small town with not a lot of money. And to me paying shop prices for things to be done just isnt feasible. Im going to use this to walk me through and im so glad i stumbled upon this video. Literally saving me hundreds

Appreciate it man!

Vacume broke at fire wall

Legend

🎉🎉🎉

I got 2000 corolla but with same engine, and just wondering can I change my steering belt without removing alternator belt ?

Quick question. Does your overflow reservoir have a cap with 2 fittings on it? I have a hose on one side that goes to the radiator, and the otherside is just a short little piece of hose that it looks like someone cut.

Too bad I don’t have an air gun for the center bolt to take off the hub…

Great job

I just did this today. I just kept removing things and I got to the point where I almost opened the coolant line. Lol. Fortunately I was able to wiggle that thing out. The reassembly took Half as long. lol.

Could this cause fuses to smoke and no brake light

Great video, man! I decided it was pathetic that I don't know how to change my own oil so I watched this video and just did it. Hardest part was on my Ranger, the filter was really hard to get to, but other than that, a really smooth process. This video made it easy for me to tell what was what when it did it.

thank you so much for posting this, very informative. I'm torn on the multiple replacements...I just had this old Mexican guy whose been right way more times than I have tell me to take a portion of the old fluid and mix it with the new, which sounds off to me but I think I get the concept. I'm going to do a 2x replace and add the additive like you did. Camry 177K I'll let you know if anything bizarre happens...

Hola...me gustan tus videos,se entiende muy bien..y más me gusta por que tengo un corolla 95 manual del mismo color y es de Canadá,yo estoy en Argentina, difícil conseguir algunas cosa...( ejemplo, el faro de adelante y los espejos laterales.. 0:2🤦), el auto anda bárbaro...hize todos los cambios de fluidos, todos,..pero me esta fallando la caja de transmisión, no entra la quinta...podrías hacer un video de como se cambian, si está, no lo encontré ... Gracias...sos uno de los únicos que tiene los videos de estos Corolla que son una maza...!!!!

You just used the clamp to the ball joint yikes its still in service no issues?

Nice hit for the bj removal satisfying af

With a bj press you still need to cut the stud this time in just hammered it out and made my own cup with a piston off a checy front caliper and a grinder

It’s every climate bro honda vss or wss always rust stuck to the breaking point of the plastix

Clean cord, man I find out if you check your vehicle up and you don’t have an impact one thing I do with a neutral is a jerk the wheel like I’m gonna tighten it in that direction once it starts spinning I use the momentum of the tire and jerk it the other way and that losens emb up if you forget to loosen them on the ground

My geo doesn't leave room for a regular ratchet. The nut was so rusted and stuck I had to use a nut remover and end wrench.

Do the corolla and celica have the same exact radiator? I'm buying a corolla tomorrow and it needs a radiator and I was just gonna swap my celica one in if possible

What size of tonneau cover you got on this cuz I can’t find it I have same truck but king ranch model

I'm doing my 1999 Toyota Aristo with sat nav gps and the stock amp is located in the boot. 😢

Very informative video, i didn’t know how the Led side in the bulb needed to sit inside the housing. Thanks man

Do you know what's the original size of the exhaust pipe?

How much miles till you change that transmission fluid because mine looks no where near as dark. Mine is red with little slight tint a of gray 109000 miles toyota avalon

You desirve a subscribe man

Thank you!

This also as easy to the front sway bar bushings?

I just watched a video and you're taking more steps to take out your CV shaft. The other channel didn't bother with the brake lines.