Hi, thank you for comment and for subscribe. Yes, are looking damn good. Check the rest of videos and you will find more beautiful audio pieces. Cheers and stay tuned !
Thanks a lot brother, it helped me to hook up my JVC SEA-80 equalizer to my Sharp Optonica SM-3636 amplifier. I was confused about connecting the tape deck but now all sorted. Great video!
Hi, thank you for comment and for subscribe! I m happy with that! Watch the rest of videos also and i m shure you'll find more tricks necessary. Cheers and stay tuned!
When hooking The EQ up to the Tape Ins/Outs is everything EQ’d (Phono/Tuner/Aux/Tape) or just Tape. If answer is just Tape, would removing the bridges & hooking the EQ up through Pre/Power Amp terminals EQ everything (Phono/Tuner/Aux/Tape).?
Hi, thank you for comment and for subscribe. You have 3 possible situations: 1. Eq connected to tape in/out and you will have all inputs EQ ed, but this tape input it will be occupied in case you want to connect another Tape deck you should connect it behind EQ. 2. Remove amplifier bridges and connect there EQ , pre out - power in. Eq ed all inputs. 3. Just connect on one input of amplifier the Eq output and Eq input connect to your audio source. Eq ed only that audio source. Cheers and good luck !
Hi and thank you for comment and for Subscribe. I hope this video was helpful and i suggest to check the rest of clips inside Video sections belongs this channel. Cheers and thx again !
Hi, thanks for all you video . Can you help me to connect my pionneer SG 9800 to SA 608 and CTF 600 and TX 608 ? I don't know anything, if you can help me...thanks
Thank you very much for tutorial but I have a different question; please tell me what kind of connector using for speakers? I have same amplifier and I need a connector or converter for speaker connection,thanks for help
Hi, thank you for comment and for subscribe. Good question, another solution is to buy four female 4mm jack speaker connectors + 4 wires (8 inch / 20 cm each), solder one end of cable on each connector and the other end connect it on existing amplifier binding posts. I think this is the easiest method to have connection for 4mm jacks speaker cables. Cheers and good luck!
I have a Pioneer SX 750 receiver and a Pioneer SG-9 Graphic Equalizer. I'm in extreme Dire need of assistance. Please direct me in how to hook, both the two up if at all possible? As, I'm a "Newbie 101" in this field. I thank you kindly in advance.
Hi and thnak you for comment and for subscribe. I suggest to watch carefully the movie how i connect the cables between Amplifier and Equalizer. It will be same to SX750 - you have to connect EQ to Tape 1 exactly like in the video and after that on front of SX750 turn the knob TapeMonitor to position 1. Good luck and i m waiting your feedback. Cheers !
To connect an equalizer between an amplifier and a receiver i connect the equalizer line out to the amp pre in and the equalizer line in to the receiver amp out?
Hi, thank you for comment and for subscribe. Is not correct, Receiver preamp out -》EQ line in --》EQ line out-》Amplifier Power Amp In. Ideea is to use Receiver like an preamplifier and Amplifier like an power amplifier, between them you will hook Equalizer. I hope it will help you those explanations. Cheers and stay tuned, new videos will be released.
Hi, can you please show us how to connect an RG-2 Dynamic expander and a SR-303 Reverberation Amplifier together with an sg equalizer to an SA 7800, much obliged in advance
Hi, thank you for comment and for subscribe! You have more options to connect RG and SR with SA 7800. For me the fastest one is to connect RG on Tape 1 and SR on Tape 2. I don't have them now for a video recording. You can watch this video and how i made connections for EQ is same for RG and SR. Another option is to connect SR in series with RG and after that connect to SA7800. Cheers !
Hi, thank you for comment and for subscribe! I made cables by myself and i m using RCA's from Proel and wires from Cordial. Lenght i choose shortest as possible. Cheers!
Hi, thank you for comment and for subscribe! Wow, nice setup, lucky you! It s very easy, RR 707 -> spec 1 tape 1 SG 9800 -> spec 1 tape 2 CTF 1000 -> SG 9800 Spec 1 -> Spec 4 If is not clear will continue more detailed. Cheers and good luck!
Nice, i have now on bench one SX 1250 for full restoration and i have in mind to record all process. Tx9500 -> SX1250 aux SG9800 -> sx 1250 tape2 CTF 1000 -> Sx 1250 tape 1 Cheers and good luck !
Hi, thanks for comment. You have two more options: First one is to disconnect the bridges between preamp and power amp and connect there eq. Second one is to connect the eq between the source input signal and input of amplifier. Good luck!
Hi David and welcome on MariusHiFi Channel. Thank you for comment and for subscribe. About the cables i m using microphone cables from Cordial, model CMK 222. I hope it will help you. Cheers !
Damn, they are stunning looking pieces 👍🏼
Hi, thank you for comment and for subscribe.
Yes, are looking damn good.
Check the rest of videos and you will find more beautiful audio pieces.
Cheers and stay tuned !
Thanks a lot brother, it helped me to hook up my JVC SEA-80 equalizer to my Sharp Optonica SM-3636 amplifier. I was confused about connecting the tape deck but now all sorted. Great video!
Hi and thank you for comment and for subscribe. Wish you time to listen the actual system configuration. Cheers and check the rest of videos.
Thank you this helped me set up my Tecknichs A-800 + GE90.....Thanks again
Suuper, happy to know this! Thank you for comment and subscribe. Every second day new video is released.
See you !
Thank you, This helped a lot.
Hi, thank you for comment and for subscribe!
I m happy with that!
Watch the rest of videos also and i m shure you'll find more tricks necessary.
Cheers and stay tuned!
De mare ajutor aceste informații!
I m happy to hear this, thank you !
Have a nice evening and good luck!
Thank you, you just saved my Hi Fidelity life……😅
Hi, happy to hear this. Good music - good life. Check the rest of the videos and you will find nice setups and ideas. Cheers!
Thanks for sharing. This is awesome 👏
Thank you so much, i hope it was helpful this video for you. Thx for comment and SUBSCRIBE! Cheers!
When hooking The EQ up to the Tape Ins/Outs is everything EQ’d (Phono/Tuner/Aux/Tape) or just Tape. If answer is just Tape, would removing the bridges & hooking the EQ up through Pre/Power Amp terminals EQ everything (Phono/Tuner/Aux/Tape).?
Hi, thank you for comment and for subscribe. You have 3 possible situations:
1. Eq connected to tape in/out and you will have all inputs EQ ed, but this tape input it will be occupied in case you want to connect another Tape deck you should connect it behind EQ.
2. Remove amplifier bridges and connect there EQ , pre out - power in. Eq ed all inputs.
3. Just connect on one input of amplifier the Eq output and Eq input connect to your audio source. Eq ed only that audio source.
Cheers and good luck !
@@MariusHiFii Right On, Thank You for the info & quick reply Marius!
Cheers !
Thank you 🎉
Hi and thank you for comment and for Subscribe. I hope this video was helpful and i suggest to check the rest of clips inside Video sections belongs this channel. Cheers and thx again !
Hi, thanks for all you video .
Can you help me to connect my pionneer SG 9800 to SA 608 and CTF 600 and TX 608 ?
I don't know anything, if you can help me...thanks
Thank you very much for tutorial but I have a different question; please tell me what kind of connector using for speakers? I have same amplifier and I need a connector or converter for speaker connection,thanks for help
Hi, thank you for comment and for subscribe.
Good question, another solution is to buy four female 4mm jack speaker connectors + 4 wires (8 inch / 20 cm each), solder one end of cable on each connector and the other end connect it on existing amplifier binding posts.
I think this is the easiest method to have connection for 4mm jacks speaker cables.
Cheers and good luck!
@@MariusHiFii thank you very much for answer,I will try ;)
Hello, newbie in the audio here. How can I hook eq with turntable (w/o phono) and integrated amp with phono. Thanks and more power!
Hi, thank you for comment and for subscribe.
Tell me what setup you have, amp - eq - turntable brands and models.
Thank you !
Cheers!
I have a Pioneer SX 750 receiver and a Pioneer SG-9 Graphic Equalizer. I'm in extreme Dire need of assistance. Please direct me in how to hook, both the two up if at all possible? As, I'm a "Newbie 101" in this field. I thank you kindly in advance.
Hi and thnak you for comment and for subscribe. I suggest to watch carefully the movie how i connect the cables between Amplifier and Equalizer. It will be same to SX750 - you have to connect EQ to Tape 1 exactly like in the video and after that on front of SX750 turn the knob TapeMonitor to position 1. Good luck and i m waiting your feedback. Cheers !
To connect an equalizer between an amplifier and a receiver i connect the equalizer line out to the amp pre in and the equalizer line in to the receiver amp out?
Hi, thank you for comment and for subscribe. Is not correct, Receiver preamp out -》EQ line in --》EQ line out-》Amplifier Power Amp In.
Ideea is to use Receiver like an preamplifier and Amplifier like an power amplifier, between them you will hook Equalizer. I hope it will help you those explanations.
Cheers and stay tuned, new videos will be released.
@@MariusHiFii well, i was close! haha, thank you! (hey, at least i know the tape monitor loop thingy;)
Great job ! Cheers !
Thanks
Thank you also for comment. I hope it was useful for you. Cheers!
Helpful
I m glad to hear this and i m happy if my videos helping audio enthusiasts. Cheers!
Hi, can you please show us how to connect an RG-2 Dynamic expander and a SR-303 Reverberation Amplifier together with an sg equalizer to an SA 7800, much obliged in advance
Hi, thank you for comment and for subscribe!
You have more options to connect RG and SR with SA 7800.
For me the fastest one is to connect RG on Tape 1 and SR on Tape 2.
I don't have them now for a video recording.
You can watch this video and how i made connections for EQ is same for RG and SR.
Another option is to connect SR in series with RG and after that connect to SA7800.
Cheers !
Eccellente😊straordinario vintage😅
Salut, ce cabluri audio folosesti si de unde pot sa cumpar la fel? Multumesc,
Hi, thank you for comment and for subscribe!
I made cables by myself and i m using RCA's from Proel and wires from Cordial. Lenght i choose shortest as possible.
Cheers!
Hi . I have a full spec rack but i have no idea how to hook it up. R to R 707 , ct f1000 cassette, 9800 EQ, spec 1 and spec 4. Can you help me?
Hi, thank you for comment and for subscribe!
Wow, nice setup, lucky you!
It s very easy, RR 707 -> spec 1 tape 1
SG 9800 -> spec 1 tape 2
CTF 1000 -> SG 9800
Spec 1 -> Spec 4
If is not clear will continue more detailed.
Cheers and good luck!
@@MariusHiFii thank you!!! I will try tomorrow .. I also have another set up sx 1250 , ct f 1000 , 9800 EQ and tx 9500 .
Nice, i have now on bench one SX 1250 for full restoration and i have in mind to record all process.
Tx9500 -> SX1250 aux
SG9800 -> sx 1250 tape2
CTF 1000 -> Sx 1250 tape 1
Cheers and good luck !
@@MariusHiFii please do!!!
_Spaghetti Time!_ 😁
😂
How to connect if amp has no Tape monitor switch?
Hi, thanks for comment.
You have two more options:
First one is to disconnect the bridges between preamp and power amp and connect there eq.
Second one is to connect the eq between the source input signal and input of amplifier.
Good luck!
salut, cum te pot contacta ? vreau sa te intreb ceva ,cum o pot face??
Hi, thank you for comment and for subscribe! We can talk here!
Cheers !
What brand of audio cable is this please?
Hi David and welcome on MariusHiFi Channel. Thank you for comment and for subscribe. About the cables i m using microphone cables from Cordial, model CMK 222. I hope it will help you. Cheers !